IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
STI

SKU: KIT-319

STI KIT-319 Replacement Wiring Harness for Universal Stopper Series

Replacement harness for STI Universal Stopper Series at 9VDC
- Direct fit for STI Universal Stopper electric strikes, no adapters
- 9VDC operation integrates with existing access control power rails
- HID credential system compatible for enterprise reader environments
In stock · Ships same business day

$44.42 $30.99 Save $13.43

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-405440

STI KIT-405440 Gasket for STI-6514 Electric Strike

Replacement gasket assembly for STI-6514 electric strike units
- Designed for STI-6514 9VDC electric strike with HID credential reader
- Restores door frame seal integrity and strike operational performance
- Wall-mounted gasket/seal component for access control installations
Special Order · Ships in 2-3 weeks

$8.82 $5.99 Save $2.83

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-67

STI KIT-67 Replacement Glass for STI-6700

Replacement glass for STI-6700 lock/strike systems at 9VDC
- Direct replacement component for STI-6700 strike assemblies
- Operates on 9VDC power for access control installations
- Wall-mounted design compatible with existing STI-6700 infrastructure
Special Order · Ships in 2-3 weeks

$12.22 $7.99 Save $4.23

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-67-FR

STI KIT-67-FR French Replacement Glass for STI-6700

French-language replacement glass for STI-6700 emergency keypads
- Direct fit for STI-6700 with 9VDC wired systems and RS-232 communication
- French-language labeling for multilingual facility installations
- Wall-mounted glass panel replacement requires no system modifications
Special Order · Ships in 2-3 weeks

$12.22 $7.99 Save $4.23

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-82

STI KIT-82 Tamper-Resistant Stainless Steel Screws

Tamper-resistant stainless steel screws for STI access control
- Corrosion-resistant stainless steel rated for indoor and outdoor use
- Tamper-resistant design secures STI lock and strike installations
- 9VDC compatible for standard access control system integration
Special Order · Ships in 2-3 weeks

$17.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-84

STI KIT-84 Tamper Resistant Screw Kit for Horn/Strobe Guards

Tamper-resistant screw kit for STI horn and strobe guards
- Prevents unauthorized removal of fire alarm guard assemblies
- Compatible with STI horn and strobe guard installations
- Operates at 9VDC for integrated fire alarm systems
Special Order · Ships in 2-3 weeks

$17.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-86

STI KIT-86 Tamper Resistant Screws for Horn/Speaker/Strobe Guards

Tamper-resistant screws for STI horn/speaker/strobe guards
- Steel construction with tamper-resistant design prevents unauthorized removal
- Compatible with STI notification device guards for wall-mounted applications
- Complete screw kit for securing audible and visual alarm components
Special Order · Ships in 2-3 weeks

$16.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-900

STI KIT-900 Conduit Spacer - Clear for STI-9110

Clear conduit spacer for STI-9110 lock/strike alignment
- Compatible with STI-9110 series 9VDC lock/strike systems
- Clear construction enables visual verification during installation
- Wall-mount conduit spacer for proper door frame routing
Special Order · Ships in 2-3 weeks

$25.55 $16.99 Save $8.56

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-900-R

STI KIT-900-R 2" Spacer Red for STI-4100/STI-4130

2" red spacer for STI-4100/STI-4130 strike alignment
- 2-inch width positions electric strike at correct door frame depth
- Compatible with STI-4100 and STI-4130 models operating at 9VDC
- Red color aids visual identification during installation and maintenance
Special Order · Ships in 2-3 weeks

$26.82 $16.99 Save $9.83

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-901

STI KIT-901 Clear 2" Spacer for STI-9105 Electric Strike

2" clear spacer for STI-9105 electric strike door frame alignment
- 2-inch acrylic/polycarbonate thickness corrects frame mounting variations
- Installs between strike and frame for proper 9VDC electromagnetic engagement
- Compatible with STI-9105 electric strike systems in access control setups
Special Order · Ships in 2-3 weeks

$23.11 $14.99 Save $8.12

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-AP18017

STI KIT-AP18017 Din Rail Lock/Strike for EnviroArmour

DIN rail lock/strike for EnviroArmour access control panels
- 9VDC operation with HID card/badge credential support
- Mounts directly to DIN rail in control panels and enclosures
- Configurable fail-safe and fail-secure door modes
Special Order · Ships in 2-3 weeks

$12.34 $8.99 Save $3.35

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-BV4X

STI KIT-BV4X Fiberglass Breather Vent for EnviroArmour

Fiberglass breather vent for EnviroArmour moisture and pressure control
- Manages condensation buildup in sealed outdoor equipment housings
- UV-resistant fiberglass construction rated for outdoor environments
- Designed for EnviroArmour enclosure systems—verify compatibility before order
Special Order · Ships in 2-3 weeks

$101.17 $63.99 Save $37.18

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-DV16

STI KIT-DV16 Nylon Condensation Drain Vent 16mm

16mm nylon drain vent for HID access control moisture management
- 16mm nylon vent removes condensation from door strikes and reader housings
- Compatible with HID credential-based access control systems at 9VDC
- Nylon construction resists chemicals in indoor access control installations
Special Order · Ships in 2-3 weeks

$19.74 $13.99 Save $5.75

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-E02111PCB

STI KIT-E02111PCB Stopper Station Shield Piezo Sounder

9VDC piezo sounder for HID access control door strikes
- Audible alert signaling integrated into door strike and lock assemblies
- 9VDC operation compatible with standard access control power supplies
- Stopper station shield configuration for multi-door secure entry points
Special Order · Ships in 2-3 weeks

$37.60 $25.99 Save $11.61

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-E06402

STI KIT-E06402 Exit Stopper Red Reed Switch

Reed switch exit stopper for HID access control at 9VDC
- Reed switch strike provides door position feedback with electromagnetic locking
- Operates at 9VDC for integration with standard HID access control panels
- Wall-mounted design suits retrofit and new installation controlled egress applications
Special Order · Ships in 2-3 weeks

$18.69 $12.99 Save $5.70

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-E10197H

STI KIT-E10197H Contact Switch Holder for Stopper® Station

Contact switch holder for STI Stopper stations with HID card reader support
- Integrates HID credential readers with electronic strike activation at 9VDC
- Designed for STI Stopper door security station systems and retrofit applications
- Contact switch holder enables access control workflows across multiple entry points
Special Order · Ships in 2-3 weeks

$37.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

STI KIT-319 Replacement Wiring Harness for Universal Stopper Series

STI KIT-405440 Gasket for STI-6514 Electric Strike

STI KIT-67 Replacement Glass for STI-6700

STI KIT-67-FR French Replacement Glass for STI-6700

STI KIT-82 Tamper-Resistant Stainless Steel Screws

STI KIT-84 Tamper Resistant Screw Kit for Horn/Strobe Guards

STI KIT-86 Tamper Resistant Screws for Horn/Speaker/Strobe Guards

STI KIT-900 Conduit Spacer - Clear for STI-9110

STI KIT-900-R 2" Spacer Red for STI-4100/STI-4130

STI KIT-901 Clear 2" Spacer for STI-9105 Electric Strike

STI KIT-AP18017 Din Rail Lock/Strike for EnviroArmour

STI KIT-BV4X Fiberglass Breather Vent for EnviroArmour

STI KIT-DV16 Nylon Condensation Drain Vent 16mm

STI KIT-E02111PCB Stopper Station Shield Piezo Sounder

STI KIT-E06402 Exit Stopper Red Reed Switch

STI KIT-E10197H Contact Switch Holder for Stopper® Station

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading