IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Axis

SKU: 5507-481

Axis T91B52 Extension Pipe 100cm - 5507-481

1-meter aluminum extension pipe for Axis T91B50/T91B51 mounts
- 100 cm vertical extension clears obstacles and gains sightline height
- Works only with T91B50 and T91B51 mounts; verify compatibility first
- Lightweight aluminum/stainless steel design minimizes wind loading
In stock · Ships same business day

$71.12 $68.99 Save $2.13

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5504-821

Axis T91D61 Wall Mount 1.5" NPS - 5504-821

Wall mount for fixed dome pendants, 1.5" NPS thread, aluminum construction
- Chromated and powder-coated aluminum resists corrosion in coastal and humid environments
- 1.5" NPS thread connection compatible with Axis fixed dome pendant kits
- 3/4" conduit passage routes cables behind mount or through wall infrastructure
In stock · Ships same business day

$108.24 $104.99 Save $3.25

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01444-001

Axis T91G61 Outdoor Wall Mount Urban Grey - 01444-001

Aluminum wall mount with IP66 sealed compartment and IK10 impact rating
- IP66-rated compartment keeps connectors dry in rain and direct spray
- IK10 impact resistance withstands 20 joules of vandalism and accidental strikes
- Aluminum construction resists corrosion in coastal and high-humidity outdoor sites
In stock · Ships same business day

$282.46 $273.99 Save $8.47

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-641

Axis T91H61 Wall Mount for Fixed Dome Cameras - 5507-641

Wall mount for fixed dome cameras with IP66 weatherproof housing
- Built-in RJ45 cable eliminates separate connector runs and adapter stacking
- IK10 impact resistance withstands 5 kg drop from 1.5 m for vandal environments
- Accessory compartment houses surge protectors and PoE injectors behind camera
In stock · Ships same business day

$228.86 $221.99 Save $6.87

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-721

Axis T94A01L Recessed Mount for Q60-E - 5505-721

Recessed mount for Q60-E cameras with IK10 vandal rating
- Aluminum and stainless steel construction resists corrosion in outdoor environments
- IK10 impact rating withstands 20-joule direct strikes in high-traffic areas
- Flush-mount design reduces visual profile and wind load on camera body
In stock · Ships same business day

$295.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01190-001

Axis T94S01P Conduit Back Box - 01190-001

IP66/67 sealed conduit back box with IK10+ impact rating for outdoor cameras
- IP66/67 rating stops rain, dust, and spray from compromising cable terminations
- IK10+ vandal rating survives deliberate strikes and physical abuse without breaching
- 3/4" NPT and M25 conduit ports on front, back, and sides for flexible routing
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5900-151

Axis T98A15-VE IP66 IK10 Surveillance Cabinet - 5900-151

IP66/IK10 stainless steel cabinet for outdoor network equipment
- IP66 dust-tight, high-pressure water jet protection for exposed sites
- IK10 impact resistance withstands vandalism and physical abuse
- NEMA 4X stainless steel resists corrosion in coastal and industrial areas
In stock · Ships same business day

$356.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01764-001

Axis TA8801 Clear Dome Cover 5-Pack - 01764-001

5-pack clear dome covers for AXIS A8207-VE door stations
- Pack of 5 spares reduces per-unit cost for multi-unit deployments
- Optical-grade plastic maintains video clarity while protecting lens
- Shields door station from weather, impacts, scratches, vandalism
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02222-001

Axis TC1601 Universal Mount Bracket - 02222-001

Universal bracket fits dome, bullet, and box cameras on any surface
- Multi-angle positioning adjusts sightline after install without remounting
- Durable metal construction rated IP65 for indoor and outdoor deployments
- Single SKU replaces model-specific mounts across mixed Axis camera fleets
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02503-001

Axis TI8203 Adapter Plate Mount - 02503-001

Powder-coated aluminum adapter plate, IP66-rated, bridges legacy and current Axis lines
- IP66 weather resistance blocks rain, spray, and dust in industrial and coastal zones
- 160 × 160 mm footprint fits standard junction boxes without custom fabrication
- Operates -40°C to 60°C; powder-coated aluminum resists corrosion and UV damage
In stock · Ships same business day

$174.22 $168.99 Save $5.23

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02563-001

Axis TI8903 Clear Dome 5-Pack - 02563-001

Clear dome 5-pack for Axis cameras with scratch-resistant protection
- High-quality scratch-resistant material maintains optical clarity long-term
- Precision-fit design compatible with multiple Axis camera models
- Five-pack bundle reduces per-unit cost for multi-camera deployments
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02731-001

Axis TM3821 Black Casing 4-Pack - 02731-001

IP66 weatherproof casings for Axis network cameras, 4-pack
- IP66 rating shields cameras from dust and moisture in outdoor conditions
- Compatible with Axis network cameras for multi-camera deployments
- Black finish integrates discreetly into security installations
Special Order · Ships in 2-3 weeks

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02428-001

Axis TM5801 Smoked Dome Cover - 02428-001

Dark gray smoked dome for Axis M5000-G series cameras
- IP65-rated dark gray tint reduces visibility while preserving image clarity
- Lightweight 2 lb construction fits existing mounts without reinforcement
- Compatible with Axis M5000-G series; indoor and outdoor rated
In stock · Ships same business day

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02083-001

Axis TP1601 Adapter Plate Mounting Accessory - 02083-001

Universal adapter plate for dome, bullet, PTZ cameras with cable concealment
- Works with Axis dome, bullet, and PTZ cameras across multiple generations
- Integrated routing conceals connectors and fasteners for clean installations
- Pairs with T94S01P conduit box for weatherproof outdoor deployments; IP65 rated
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02452-001

Axis TP3201-E Recessed Ceiling Mount White - 02452-001

Recessed ceiling mount for six Axis dome cameras, white finish
- Sits flush with finished ceilings to minimize visual footprint in retail
- Multiple cable routing holes keep network and power organized and secure
- Lightweight 3 lb design simplifies single-person installation from ladder
In stock · Ships same business day

$174.22 $168.99 Save $5.23

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01804-001

Axis TP3601 3/4" Conduit Adapter 4-Pack - 01804-001

3/4" conduit adapters for Axis M32/P32 cameras, 4-pack outdoor-rated
- Four adapters per pack for multi-camera deployments with standard M25 conduit
- Works directly with Axis M32 and P32 series, eliminates secondary adapter needs
- Outdoor-rated construction handles UV, temperature cycling, and moisture exposure
In stock · Ships same business day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis T91B52 Extension Pipe 100cm - 5507-481

Axis T91D61 Wall Mount 1.5" NPS - 5504-821

Axis T91G61 Outdoor Wall Mount Urban Grey - 01444-001

Axis T91H61 Wall Mount for Fixed Dome Cameras - 5507-641

Axis T94A01L Recessed Mount for Q60-E - 5505-721

Axis T94S01P Conduit Back Box - 01190-001

Axis T98A15-VE IP66 IK10 Surveillance Cabinet - 5900-151

Axis TA8801 Clear Dome Cover 5-Pack - 01764-001

Axis TC1601 Universal Mount Bracket - 02222-001

Axis TI8203 Adapter Plate Mount - 02503-001

Axis TI8903 Clear Dome 5-Pack - 02563-001

Axis TM3821 Black Casing 4-Pack - 02731-001

Axis TM5801 Smoked Dome Cover - 02428-001

Axis TP1601 Adapter Plate Mounting Accessory - 02083-001

Axis TP3201-E Recessed Ceiling Mount White - 02452-001

Axis TP3601 3/4" Conduit Adapter 4-Pack - 01804-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading