Axis 02428-001 Smoked Dome Cover
Overview
The Axis 02428-001 is a replacement smoked dome cover designed to mount on compatible Axis IP cameras in the M5000-G series. The dark gray tint reduces camera visibility while maintaining optical clarity — a straightforward protective and aesthetic accessory for installations where discretion is a deployment requirement rather than an option.
Key Features
- Dark Gray Smoked Tint: The tint camouflages the camera and internal components without degrading image quality. Useful in spaces where visible surveillance can create friction with occupants — retail, hospitality, or corporate interiors where a lower-profile appearance helps blend the camera into its surroundings.
- Lightweight Construction: At 2 lbs, the cover adds minimal weight to your camera mount, so you won't need to upsize brackets or reinforcement if you're retrofitting onto existing installations.
- Indoor and Outdoor Rated: Suitable for both indoor and outdoor environments. If you're deploying in a wet or corrosive location (dock, chemical plant, food processing), verify that your base camera meets those requirements — the cover itself is rated for exposure, but the underlying camera must be the limiting factor.
- Drop-In Compatibility: Designed specifically for Axis cameras in the M5000-G family. Verify your exact camera model before ordering; this is a precision fit, not a universal dome.
- Optical Clarity: The smoked finish doesn't blur or distort the camera's field of view. Unlike fully opaque covers, this design preserves image sharpness while reducing the visual prominence of the camera itself.
- Clear Alternative Available: If your deployment calls for maximum transparency and you don't need the smoke tint, the Axis 02429-001 (white/clear variant) is the comparable option for the same camera family.
Integration & Compatibility
The 02428-001 (often searched as 02428 001) is a direct accessory for Axis M5000-G series cameras. Confirm your base camera model before purchase — this cover will not fit other Axis families (Q, P, F, H series use different dome geometries). Installation is straightforward: the cover slides onto or clips over the existing dome on supported cameras. No tools or special fasteners are required beyond what the camera mounting kit provides.
When to Choose a Different Model
If you need a clear dome cover instead of smoked, order the Axis 02429-001. If your base camera is not in the M5000-G line, consult the camera's documentation or contact the manufacturer for the correct compatible cover. If you require additional protective features (such as anti-glare or anti-scratch coatings beyond the basic smoked finish), check whether your camera vendor offers specialized replacement domes — generic aftermarket covers may not deliver the same optical or durability standards.
What's in the Box
- Axis TM5801 Smoked Dome Cover (1 unit)
Frequently Asked Questions
Q: Will the 02428-001 fit my Axis Q1614 or P3314 camera?
A: No. The 02428-001 is designed only for Axis M5000-G series cameras. Other Axis families have different dome geometries and require their own compatible covers. Check your camera's model number (found on the label or in your documentation) and cross-reference with the manufacturer's accessory list.
Q: Does the dark gray tint reduce image quality or brightness?
A: The smoked finish is optical-grade and designed to preserve image clarity. You may see a minor reduction in ambient light transmission (roughly 10–20% depending on the camera's native sensor sensitivity), but this is negligible in well-lit environments. In low-light or IR-dependent deployments, run a test on your specific camera before full deployment.
Q: Can I use the 02428-001 outdoors in rain or salt spray?
A: The cover is rated for outdoor use, including exposure to rain and moisture. However, if your deployment is in a salt-spray or chemically aggressive environment, you'll want to confirm that your underlying camera (not just the cover) is rated for that exposure — the cover alone is not sufficient protection for extreme corrosive conditions.
Q: Is installation reversible if I need to remove the cover later?
A: Yes. The 02428-001 is a removable accessory and does not permanently modify the camera. You can install or remove it without tools or special procedures, making it safe to swap between the smoked and clear variants (02429-001) if your deployment needs change.
Q: What's the difference between the 02428-001 (smoked) and 02429-001 (white/clear)?
A: The 02429-001 is a clear or light-tinted dome for the same M5000-G camera family. Choose the 02428-001 if you want reduced camera visibility and a discreet appearance; choose the 02429-001 if you prioritize maximum optical clarity and don't mind a more visible camera housing.
Q: Does this cover affect the camera's warranty?
A: This is an official Axis accessory, so it should not void your camera's warranty when installed correctly. Check your warranty documentation or contact the camera vendor if you have specific concerns about accessory compatibility.
Marty AllisonPerspective based on aggregated and affiliated engineering team experience.
The Axis 02428-001 is a straightforward accessory — a smoked dome replacement that addresses a real problem: visible surveillance cameras often create compliance or aesthetic friction in retail, corporate, and hospitality environments. The dark gray tint keeps the camera functional while making it visually recessive, which is a pragmatic deployment choice when you can't hide the hardware completely.
Technical Highlights:
- Dark Gray Smoked Tint: Reduces the visual prominence of the camera without compromising optical sharpness. Expect minimal light transmission loss (10–20%) in normal indoor lighting, negligible in bright outdoor conditions.
- 2 lbs Weight: Light enough that you won't need to reinforce existing M5000-G mounts or ceiling brackets when retrofitting. Important if you're upgrading covers on a fleet of cameras already in place.
- M5000-G Family Fit Only: Precision-engineered for a specific camera line. Cross-family compatibility is zero — verify your base camera model before ordering.
Deployment Considerations:
- The smoked finish is an aesthetic choice, not a security feature. If occupants know the camera is there, the tint won't make them forget; it just makes the hardware less obtrusive visually.
- Indoor/outdoor rating applies to the cover itself, but always verify that your base M5000-G camera is rated for your environment. The cover is the weaker link in corrosive or high-temperature settings.
- Test the tint on a sample installation before deploying across a fleet — light transmission varies with ambient conditions, and some operators report noticeable image darkening in low-light or night-vision-dependent scenarios.
Best suited for retail layouts, office interiors, and hospitality venues where camera visibility creates friction with guests or compliance teams. Not a solution for covert surveillance — just a way to make the surveillance you're already doing more visually palatable to the space.
