IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Axis

SKU: 01961-001

Axis M12 16mm F1.8 Fixed Lens 4-Pack - 01961-001

M12 16mm F1.8 fixed lens 4-pack for wide-angle Axis network camera coverage
- F1.8 aperture captures sharp detail in low-light conditions for 24/7 monitoring
- 16mm focal length delivers wide-angle coverage for corridors, lobbies, and perimeters
- Four-lens pack maintains optical consistency across multi-camera deployments
Special Order · Ships in 2-3 weeks

$91.74 $88.99 Save $2.75

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02280-001

Axis P5654-E Clear Dome Cover - 02280-001

Clear polycarbonate dome cover for Axis P5654-E and P5655-E PTZ
- Anti-scratch polycarbonate maintains optical clarity through frequent cleaning
- Weather and chemical resistant for coastal, agricultural, or industrial sites
- Lightweight 0.75 lb design fits P5654-E and P5655-E without adapters
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01215-001

Axis T90D25 W-LED Illuminator AC/DC - 01215-001

White LED illuminator with 4 interchangeable angles, 25–110m range
- Four beam angles (10°–80°) adjust from focused to wide coverage in seconds
- IP66 and NEMA 4X rated for dust, moisture, and extreme temps (-50°C to 50°C)
- IK09 impact-resistant aluminum/polycarbonate construction withstands vandalism
Special Order · Ships in 2-3 weeks

$519.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5504-911

Axis T94D01S Flat Mount Bracket White 10 pcs - 5504-911

Flat surface mount brackets for Axis P3904-R/P3905-R cameras, 10-pack
- White plastic construction with side cable entry for organized wiring
- Compatible with Axis P3904-R and P3905-R compact camera models
- 10 brackets per pack for multi-camera deployments and large installations
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-081

Axis T94K01D Indoor Pendant Kit - 5505-081

Indoor pendant mount for Axis compact domes on 1.5" NPS pipe
- Drop-ceiling suspended installation positions cameras downward for retail and office coverage
- 1.5" NPS threaded pipe compatibility works with standard infrastructure without proprietary adapters
- Compatible with P32-V, P33/-V, Q3505-V cameras and AXIS T91A67 pole mounts
In stock · Ships same business day

$53.60 $51.99 Save $1.61

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02699-001

Axis TA1802 Top Cover for Network Door Controller - 02699-001

Weatherproof top cover for Axis A1610-B door controller
- Shields against dust, debris, and rain in outdoor installations
- White durable housing with easy installation and included hardware
- Compact design (9.45 x 8.66 x 1.97 in) for A1610-B fit
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02433-001

Axis TF1201-RE Recessed Mount 4-Pack - 02433-001

Recessed 4-pack mounts for discreet outdoor sensor deployment, IP66 rated
- IP66 weather resistance protects against direct rain and dust ingress
- 4.9" diameter recessed form factor mounts flush into walls or fascia
- Compatible with Axis F2104-E and F1015 sensor units
In stock · Ships same business day

$72.15 $69.99 Save $2.16

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02619-001

Axis TM3815-E Clear Dome 4-Pack - 02619-001

UV-resistant clear dome 4-pack extends camera life 3–5 years
- High-clarity polycarbonate maintains full resolution without optical distortion
- UV protection resists yellowing and brittleness in high-sun environments
- Dust and rain-splash barrier shields camera optics from environmental debris
In stock · Ships same business day

$151.54 $146.99 Save $4.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01783-001

Axis TP3101 Pendant Wall Mount - 01783-001

Pendant mount for M32-LVE and P32 domes with concealed hardware
- Hides fasteners and cables in eco-friendly plastic for clean aesthetics
- Integrated cavity fits T6101 audio and T8643 I/O modules without extra cables
- Lightweight construction installs on drywall and composite ceilings indoors
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 03158-001

Axis TP3302-E Corner Mount IK10 Reinforced - 03158-001

IK10 corner mount for dome cameras in high-impact environments
- IK10-rated reinforced structure resists vandalism and physical tampering
- Flips left or right for flexible positioning in varied corner layouts
- Sealed enclosure protects cables; repaintable finish blends with architecture
Special Order · Ships in 2-3 weeks

$509.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02468-021

Axis TU6003 FAKRA Connector Kit - 02468-021

Color-coded FAKRA connectors for Axis surveillance cable termination
- Crimp-on connectors with dies and fixtures for TU6004-E cable assembly
- Color-coded design speeds identification and reduces wiring errors on site
- Works with standard FAKRA hand crimper for custom cable lengths in the field
In stock · Ships same business day

$43.29 $41.99 Save $1.30

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02791-001

Axis TU6007-E 8M Interconnect Cable 4-Pack - 02791-001

8M SMA-to-FAKRA cables (4-pack) for Axis F Series modular cameras
- IP66/IP67 rated connectors survive washdown, humidity, and -40°C to 75°C
- 50-ohm impedance, 0–3 GHz range maintains signal integrity over distance
- Four 8-meter cables wire complete F Series clusters without mid-run splices
In stock · Ships same business day

$72.15 $69.99 Save $2.16

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02969-004

Axis W700 Mk II 1-Bay Docking Station - 02969-004

Single-bay docking station with pogo-pin charging for body cameras
- 5 V DC, 15 W power input charges one camera per dock cycle
- Gigabit Ethernet port (100 Mbit/s throughput) for rapid data offload
- Compact 133 g design fits mobile command units and evidence booking areas
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digital Watchdog

SKU: DWC-MTTWM2

Digital Watchdog DWC-MTTWM2 Wall Mount for Turret Cameras

Aluminum wall mount for turret cameras with IP66 weather protection
- IP66-rated aluminum alloy resists dust and water in outdoor installations
- Adjustable positioning optimizes camera angle without remounting hardware
- Rigid design eliminates vibration that degrades varifocal image sharpness
In stock · Ships same business day

$67.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-140WMW

Hanwha SBP-140WMW Wall Mount for Security Cameras

Corrosion-resistant wall mount for Hanwha compact dome cameras
- Aluminum and polycarbonate construction resists rust in outdoor and coastal environments
- Adjustable arm allows pan/tilt positioning without tools during installation
- 631g lightweight design fits one-person mounting in tight spaces above doorways
In stock · Ships same business day

$65.00 $43.99 Save $21.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300TM1

Hanwha SBP-300TM1 Tilted Wall Mount for Dome Cameras

20° tilted wall mount for dome cameras—adjust angle post-install
- 20° tilt angle fine-tunes coverage without removing the camera body
- Lightweight 0.46 kg design reduces wall anchor stress during installation
- Compact 160 x 150 x 99 mm polycarbonate frame fits tight spaces
In stock · Ships same business day

$59.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis M12 16mm F1.8 Fixed Lens 4-Pack - 01961-001

Axis P5654-E Clear Dome Cover - 02280-001

Axis T90D25 W-LED Illuminator AC/DC - 01215-001

Axis T94D01S Flat Mount Bracket White 10 pcs - 5504-911

Axis T94K01D Indoor Pendant Kit - 5505-081

Axis TA1802 Top Cover for Network Door Controller - 02699-001

Axis TF1201-RE Recessed Mount 4-Pack - 02433-001

Axis TM3815-E Clear Dome 4-Pack - 02619-001

Axis TP3101 Pendant Wall Mount - 01783-001

Axis TP3302-E Corner Mount IK10 Reinforced - 03158-001

Axis TU6003 FAKRA Connector Kit - 02468-021

Axis TU6007-E 8M Interconnect Cable 4-Pack - 02791-001

Axis W700 Mk II 1-Bay Docking Station - 02969-004

Digital Watchdog DWC-MTTWM2 Wall Mount for Turret Cameras

Hanwha SBP-140WMW Wall Mount for Security Cameras

Hanwha SBP-300TM1 Tilted Wall Mount for Dome Cameras

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading