Hanwha SBP-140WMW Wall Mount for Security Cameras
The Hanwha SBP-140WMW is a purpose-built wall mount engineered to deliver stable, repeatable positioning for compatible Hanwha IP cameras. Built from aluminum and polycarbonate, this mount handles both indoor and outdoor deployments without rust or material degradation — a concrete advantage over steel brackets that corrode in humid or salt-air environments.
Key Features
- Aluminum and polycarbonate construction: Resists corrosion in commercial kitchens, exterior facades, and coastal installations where moisture and temperature swings are constant. You avoid replacement cycles that plague steel mounts.
- Compatible with QNV-C8083R and QNV-C9083R cameras: These Hanwha compact and mid-range domes mount directly to the SBP-140WMW without adapters, reducing assembly time and points of failure on-site.
- Adjustable mounting arm: Lets you dial in camera pan and tilt on-site without returning to a drill or additional hardware. Critical when final sightlines change during commissioning or after tenant fit-out.
- 631g weight (1.39 lbs): Light enough for a single technician to position and hold during wall fastening, yet robust enough to support camera weight and resist wind load. No need for a two-person team or temporary bracing.
- Compact footprint (198.2 × 145.5 × 118.3 mm): Fits into tight spaces — above doorways, in corner positions, or recessed into architectural soffits — without requiring cutouts or reinforcement plates.
- White finish: Blends into modern office, retail, and institutional settings where visible metallic hardware stands out. Reduces aesthetic friction with architects and facility managers.
Integration & Compatibility
The SBP-140WMW pairs with wall mount accessories in the Hanwha line. Confirm camera model compatibility before purchase — this mount is engineered for the QNV-C8083R and QNV-C9083R specifically. If you are deploying other Hanwha camera models, verify the correct mount SKU to avoid on-site substitutions.
Deployment Context
Install this mount in commercial offices, retail environments, warehouse perimeters, and multi-tenant buildings where you need repeatable, adjustable positioning without site-specific fabrication. The aluminum construction means you can deploy outdoors (under eave coverage) or indoors in high-humidity spaces — kitchens, swimming facilities, car parks — without material failure.
What's in the Box
The SBP-140WMW ships as the wall mount assembly. Confirm fasteners and anchors are included with your order or source separately to match your wall substrate (drywall, concrete, masonry).
Frequently Asked Questions
Q: Will the SBP-140WMW work with Hanwha cameras other than the QNV-C8083R and QNV-C9083R?
A: No. This mount is designed specifically for those two models. Attempting to mount other Hanwha or third-party cameras may result in misalignment, stress on fasteners, or camera drop. Check the compatibility list before deployment.
Q: Can I use the SBP-140WMW outdoors in direct sunlight and rain?
A: Yes, the aluminum and polycarbonate construction handles rain and UV exposure. However, for maximum service life, install it under eave or soffit coverage to minimize constant UV exposure and salt-air contact in coastal areas.
Q: What fasteners or wall anchors do I need?
A: That depends on your wall substrate — drywall requires toggle bolts or molly anchors; concrete or masonry requires lag bolts or tapcon screws. Consult your installation team or local building codes for load-rated fastening. The mount itself does not include substrate-specific hardware.
Q: Is the adjustable arm tool-free?
A: The mount includes an adjustable arm for angle positioning. Once positioned, it must be secured — confirm whether a wrench or hex key is required for your specific installation by reviewing the full assembly guide.
Q: Does the SBP-140WMW support horizontal or only vertical mounting?
A: The mount is designed for wall installation. Horizontal or ceiling mounting would require a different mount type — check the Hanwha catalog for ceiling brackets.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The SBP-140WMW (often searched as SBP 140WMW) is straightforward hardware — aluminum body, polycarbonate cover, adjustable mounting arm, 631g. If you're integrating Hanwha QNV-C8083R or QNV-C9083R domes into a multi-building retail or warehouse rollout, this mount handles the environmental durability and positioning repeatability you need without surprises.
Technical Highlights:
- Aluminum + polycarbonate composite: Eliminates rust risk compared to bare steel. In refrigerated warehouses or coastal facilities, material longevity directly reduces replacement cycles and maintenance overhead.
- Adjustable arm with 631g weight: Light enough for single-technician installation but rigid enough to hold camera and resist wind without droop. Reduces on-site fitting labor and revisits.
- Dimensions 198.2 × 145.5 × 118.3 mm: Compact profile fits into tight architectural spaces — alcoves, structural columns, soffit edges — without requiring structural modification or custom mounting plates.
Deployment Considerations:
- Fastener selection is your responsibility: The mount does not include wall anchors. Confirm your substrate type (drywall, concrete, masonry, metal stud) and select rated fasteners before installation — this is a common cause of failed commissioning.
- Compatibility lock-in: This mount is engineered only for QNV-C8083R and QNV-C9083R. If your rollout includes other Hanwha models or third-party cameras, you need different mounts for each. Plan your BOM accordingly to avoid on-site substitutions.
- Outdoor eave installation recommended: While aluminum and polycarbonate resist weather, prolonged direct UV and salt-air exposure will degrade polycarbonate faster. Mount under eaves or soffit coverage in coastal or high-UV regions for maximum service life.
Deploy the SBP-140WMW into commercial, retail, or institutional multi-site rollouts where QNV-C8083R or QNV-C9083R cameras are the standard and you need repeatable, corrosion-resistant positioning across varied wall substrates. Solid choice for facility managers building consistency across dozens of locations.
