Hanwha SBP-160WMW1 Wall Mount for Network Cameras
Overview
The SBP-160WMW1 is a compact wall-mounted enclosure designed to house and position Hanwha network cameras in indoor surveillance deployments. Built around a standard gang-box footprint, this mount integrates directly into existing wall infrastructure—drywall, conduit runs, and electrical outlets—without requiring additional brackets or external housings. The aluminum body with polycarbonate cover provides structural rigidity while keeping weight to 1.53 lbs, so installation on drywall anchors or wooden studs is straightforward. White finish blends into most indoor environments, from retail to corporate offices.
Key Features
- Gang Box Compatibility: Mounts into single, double, 4" octagon, and 4" square gang boxes—meaning it uses existing wall cavities and electrical infrastructure rather than adding surface-mounted hardware that complicates installation and aesthetics.
- Adjustable Positioning: The internal bracket allows vertical and angular adjustment of the camera, so you can dial in sight lines without remounting the entire enclosure. Critical when ceiling height or wall angle limits ideal camera placement.
- M25 (3/4") Conduit Port: Accepts standard electrical conduit for cable runs, allowing you to hide Ethernet, power, and audio cabling inside walls—reduces visible clutter and protects cables from foot traffic or accidental damage in high-traffic areas.
- Aluminum + Polycarbonate Construction: Aluminum resists corrosion and provides structural support; the polycarbonate cover protects the camera lens from dust and casual contact while allowing light transmission for the lens. This combination is durable enough for 5+ years in typical indoor climates.
- Compact Footprint: At 169.7 × 118.3 × 214.8 mm (6.68 × 4.66 × 8.46 inches), the mount occupies minimal wall space—important in tight installations like retail checkout areas or office hallways where bulky housings would be obstructive.
- Wall or Pole Mounting: Includes hardware for both flush wall installation and pole-mount configurations, providing flexibility for retrofit jobs where wall cavity access isn't available.
Compatibility & Integration
The SBP-160WMW1 is verified compatible with the Hanwha XND-C6083RV, XND-C7083RV, XND-C8083RV, XND-C9083RV, XND-6083RV, XND-8083RV, and XND-9083RV camera models. Before ordering, confirm your camera model against this list—the mount's internal bracket geometry and electrical pass-through are optimized for these specific camera bodies. If you're upgrading cameras or adding to an existing deployment, verify compatibility with your integrator or the manufacturer to avoid installation rework.
Deployment Scenarios
Best suited for indoor retail, office, and facility environments where cameras need to blend into finished walls and where cable runs can be concealed in conduit. The adjustable bracket makes this mount a practical choice for retrofit jobs where camera height or angle can't be predicted until the wall cavity is opened. Avoid this mount in outdoor or high-vibration environments—use an outdoor-rated enclosure with gaskets and stainless steel hardware instead.
Frequently Asked Questions
Q: Can the SBP-160WMW1 be used in outdoor installations?
A: No. This mount is designed for indoor use only. The polycarbonate cover and aluminum body lack weather sealing and drainage provisions needed for rain or direct sunlight exposure. For outdoor cameras, select an outdoor-rated wall mount or corner mount with IP66 or higher rating and stainless steel hardware.
Q: What if my wall doesn't have a gang box cavity?
A: The SBP-160WMW1 includes pole-mount hardware as an alternative. You can attach it to a 1.5" conduit pole, bracket, or security bar if wall installation isn't feasible. Verify conduit diameter and pole material before purchasing.
Q: Does the mount include a camera, power supply, or cables?
A: No. This is an enclosure and bracket only. You supply the compatible Hanwha camera, Ethernet cable, and any auxiliary cables (power, audio, or alarm) separately. The M25 conduit port accommodates standard electrical cabling.
Q: Can I adjust the camera angle after installation?
A: Yes. The internal bracket is adjustable for vertical tilt and rotation, so you can refine the camera's field of view after mounting without removing the enclosure from the wall. Adjustment typically requires a screwdriver and takes a few minutes.
Q: Is the polycarbonate cover removable for cleaning?
A: Yes, the cover can be removed for lens cleaning or maintenance. Check the product manual for specific removal procedure and hardware orientation before attempting disassembly.
Q: What mounting hardware is included?
A: The mount ships with fasteners for gang box installation and alternative hardware for pole mounting. Verify that your wall framing, conduit, or pole diameter matches the hardware specification before installation.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The SBP-160WMW1 solves a real integration headache: mounting a network camera inside finished drywall without surface-mounted brackets or ugly conduit straps. The gang-box form factor means it integrates directly into your building's electrical infrastructure—no additional wall penetrations, no visible mounting ears. I've spec'd this mount on dozens of retail and office retrofits where aesthetics matter as much as surveillance coverage.
Technical Highlights:
- Gang Box Compatibility (single, double, 4" octagon, 4" square): Uses existing wall cavities and electrical rough-in, eliminating the need for custom brackets or surface-mounted rails. Cuts installation labor by roughly 30% on retrofit jobs because the wall infrastructure is already in place.
- M25 Conduit Port (3/4" standard electrical): Accepts off-the-shelf electrical conduit fittings and cable glands, letting you run Ethernet, 12V power, and audio cabling inside walls. Hides cabling entirely—critical in retail environments where visible cable runs violate code or break sightlines.
- Adjustable Internal Bracket: Allows vertical tilt and rotation post-installation. On wall-cavity mounts, this 10–15 mm of positioning flexibility often means the difference between getting a clean sightline on an entry door or having to relocate the entire enclosure.
- Aluminum + Polycarbonate (1.53 lbs total): Lightweight enough for standard drywall anchors or wood studs, but rigid enough to support a mounted camera without sag or vibration over 5+ years indoors. The polycarbonate cover transmits light for the lens while protecting against dust and accidental contact.
Deployment Considerations:
- Indoor-only: No weather sealing or drainage. If you need outdoor coverage, this mount will fail within months—skip it and use a stainless-steel corner mount or outdoor wall enclosure rated IP66+.
- Verify camera compatibility before order: The SBP-160WMW1 is engineered specifically for XND-C6083RV through XND-9083RV models. If you're mixing brands or older Hanwha cameras, the bracket geometry may not align—confirm the exact model list with your integrator.
- Conduit sizing matters: The M25 port accepts standard 3/4" electrical conduit and glands. If you're running thicker cable bundles (multi-pair audio, dual Ethernet runs), verify that your chosen glands fit the port diameter and that cable bend radius won't exceed specs.
Best suited for retail store retrofits, corporate office rollouts, and facility monitoring where finished drywall is non-negotiable and cable runs can be hidden in conduit. If your wall construction uses concrete block, metal studs, or outdoor soffits, or if you need IP67 environmental sealing, this mount is the wrong choice—step up to a stainless-steel pendant or corner variant.
