Axis 02433-001 TF1201-RE Recessed Mount 4-Pack
The Axis 02433-001 is a 4-pack of recessed mounts engineered for discreet outdoor installation of Axis modular sensor units. If you're deploying F2104-E or F1015 units in locations where a flush, integrated appearance matters—warehouse entries, retail perimeters, building facades—this accessory handles the mechanical side cleanly. IP66 rating means sustained rain and dust won't compromise the mount's integrity or the seal around your sensor unit.
Key Features
- IP66 Weather Resistance: Protects mounted sensor units from direct rain and dust ingress. Suitable for outdoor walls, eaves, and covered entries. Not rated for full submersion (IP67)—if your deployment involves washdown or standing water, verify the sensor unit's own rating before committing.
- Recessed Form Factor: The 4.9-inch diameter footprint allows the sensor unit to mount flush into a wall cavity or behind trim. Minimizes visual profile compared to surface-mount alternatives, important in retail, corporate, or residential settings where discrete surveillance is a requirement.
- Compact Depth (1.7 inches per mount): Shallow mounting depth reduces the cavity required in walls or fascia. Easier retrofit into existing structures without major structural modification.
- Black Finish: Neutral color blends with most modern building materials. Reduces visual contrast that draws attention to camera housings.
- Lightweight Per Unit (0.22 lbs each): Minimal load on mounting surfaces. No need for reinforced brackets or structural bracing when installing across multiple units in series along a perimeter line.
- Verified Compatibility with F2104-E and F1015 Sensor Units: These are Axis modular sensors; the TF1201-RE is dimensioned specifically for their form factor. Mounting template and hardware included to ensure first-time fit accuracy.
Integration & Compatibility
The 02433-001 is designed exclusively for Axis F2104-E (2MP modular sensor) and Axis F1015 (sensor unit for multi-lens systems). Do not attempt to mount other sensor manufacturers' units in this accessory—fitment and sealing are unit-specific. If you're building a surveillance system around Axis modular architecture, this mount accelerates the integration process by eliminating ad-hoc bracket fabrication or surface-mount alternatives.
What's in the Box
- 4 x Axis TF1201-RE Recessed Mounts
- Mounting Hardware
- Installation Guide
Frequently Asked Questions
Q: Can I use the 02433-001 indoors?
A: Yes, IP66 rating supports indoor use. The recessed design works well in lobbies, corridors, or enclosed entries where a flush appearance is preferred. No water or dust ingress concerns indoors, so the IP66 rating is not the limiting factor—installation surface and sensor unit placement are.
Q: What mounting surface do I need?
A: The recessed mount assumes a cavity or recess in drywall, composite panels, or solid wall material. Surface must support the small weight per unit (0.22 lbs). If you are mounting on solid masonry or metal, confirm the anchor points with the installation guide included in the package.
Q: Are the mounts weatherproof without the sensor unit attached?
A: The mount itself is IP66-rated; however, for full weather protection, the sensor unit should be installed. An empty recessed mount without a sensor creates a cavity that can trap moisture or debris. Install the sensor unit or cover the opening.
Q: Can I reuse these mounts if I relocate or upgrade the sensor units?
A: Yes. The mounting hardware and fasteners are standard. If you upgrade to a different Axis modular sensor, verify it is compatible with the TF1201-RE form factor before uninstalling the old unit.
Q: Does the 02433-001 support both ceiling and wall mounting?
A: The design is for wall and recessed fascia mounting. Ceiling mounting is not recommended—condensation, water pooling in the recessed cavity, and sensor angle would all be compromised. Refer to the installation guide for approved orientations.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The Axis 02433-001 solves a real integration problem: Axis modular sensors (F2104-E, F1015) need a clean, weather-sealed mounting path that doesn't scream "surveillance camera" in the field of view. Recessed mounts deliver that. The IP66 rating on this 4-pack means you're not gambling on rain or dust compromising the seal—it's verified by Axis engineering and documented in the installation guide.
Technical Highlights:
- IP66 Rating: Direct rain and dust ingress are not concerns. If you're deploying along an industrial perimeter or a building exterior exposed to driving rain, this rating keeps water out of the electrical cavity and sensor connector.
- 4.9-inch Diameter, 1.7-inch Depth: These dimensions are deliberately compact. Retrofit installations into existing walls require minimal cutting; depth limits cavity prep time and reduces structural impact on thin fascia or composite panels.
- 0.22 lbs per Mount: Negligible load. No reinforced wall anchors or structural consultations needed. Standard drywall anchors or masonry fasteners (included) handle the weight across all four units in series.
Deployment Considerations:
- Recessed mounting requires advance cavity prep. Plan cut-outs during rough-in phase if new construction, or mark and cut during retrofit. Poor planning here costs hours of labor.
- The 4-pack is a unit quantity—you cannot buy one or two mounts à la carte from this SKU. If you need only two mounts for a small pilot, source a different accessory or confirm availability of smaller quantities with your supplier.
This accessory belongs in warehouse entry monitoring, retail loss-prevention perimeters, and corporate campus gate installations where discrete mounting is a hard requirement. Don't over-spec it for interior corridors or low-security applications where surface mounts are acceptable—recessed installation adds cost and labor.
