IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Hanwha

SKU: SBP-300WMS1

Hanwha SBP-300WMS1 Stainless Steel Wall Mount

Stainless steel wall mount for corrosion-resistant indoor/outdoor surveillance
- Precision-engineered stainless steel construction resists corrosion in harsh environments
- Compatible with Hanwha stainless steel camera models for integrated deployments
- Silver finish with stable positioning for industrial, coastal, and chemical facilities
Special Order · Ships in 2-3 weeks

$625.00 $419.99 Save $205.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WMW

Hanwha SBP-300WMW Gooseneck Wall Mount

Gooseneck wall mount with articulated neck and 1.5" PF thread
- Aluminum and steel construction at 1.87 lbs for single-technician install
- Adjustable gooseneck allows camera angle tuning without wall remounting
- Compact 4.41" × 7.2" footprint fits tight corridors and retail spaces
In stock · Ships same business day

$79.00 $52.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-301HM5

Hanwha SBP-301HM5 Ivory Hanging Mount

Compact ivory ceiling mount with 1.5" NPT for Hanwha cameras
- Aircraft-grade aluminum resists corrosion in humid and extreme temperatures
- Standard 1.5" NPT threads integrate with off-the-shelf commercial pipe fittings
- Lightweight at 197g with minimal footprint won't obstruct ceiling fixtures
In stock · Ships same business day

$49.00 $32.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-301HMW3

Hanwha SBP-301HMW3 Cap Adapter

Aluminum 1.5" NPT cap adapter for pole and wall mount installations
- 1.5" NPT thread integrates directly with standard industrial mounting poles
- Aluminum construction resists corrosion in outdoor and high-humidity environments
- Lightweight 270g design with compact 155mm diameter fits tight ceiling spaces
In stock · Ships same business day

$49.00 $32.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CM

Hanwha SBP-302CM Telescopic Pendant Mount

Telescopic pendant mount with adjustable height for indoor/outdoor camera placement
- Extend or retract to dial in optimal camera angle without custom brackets
- Indoor and outdoor rated construction withstands temperature swings and moisture
- Pairs with Hanwha SBP-302CMA mounting plate for validated, secure camera hold
In stock · Ships same business day

$250.00 $187.99 Save $62.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CM-12

Hanwha SBP-302CM-12 Extension Pipe for Hanging Mounts

12-inch extension pipe for Hanwha hanging mounts in tight spaces
- 12-inch aluminum and steel construction clears eaves and obstructions
- Compatible with all Hanwha hanging mounts for flexible camera positioning
- Indoor and outdoor rated for retail, parking, industrial installations
In stock · Ships same business day

$65.00 $48.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMAS

Hanwha SBP-302CMAS Telescopic Pendant Mount with Swivel Adaptor

Telescopic pendant mount with swivel for flexible camera positioning
- Adjusts 4.5–8 feet high to fit standard ceiling heights without custom conduit
- ±45° swivel adaptor allows precise aiming in either direction after install
- Aluminum and steel hybrid resists corrosion in damp indoor and covered outdoor
In stock · Ships same business day

$400.00 $299.99 Save $100.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMASW

Hanwha SBP-302CMASW White Telescopic Pendant Mount

White telescopic pendant mount with 4.5–8 ft extension and swivel
- Extends 4.5 to 8 feet with 45° pivot angle for flexible camera positioning
- 1.5-inch NPT thread compatible with Hanwha white hanging mount systems
- Corrosion-resistant white finish built for durable ceiling-mounted installations
In stock · Ships same business day

$400.00 $268.99 Save $131.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMB

Hanwha SBP-302CMB Pendant Mount Back Box

Pendant mount back box for ceiling-suspended camera systems
- Stabilizes pendant-mounted cameras; prevents drift and vibration shift
- Indoor/outdoor rated construction handles retail, corporate, and warehouse
- Works with SBP-302CM(W) telescopic pendant mounts; standard tool install
In stock · Ships same business day

$190.00 $142.99 Save $47.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMSW

Hanwha SBP-302CMSW White Swivel Adapter

360° horizontal swivel adapter for Hanwha ceiling and wall mounts
- Full 360° continuous rotation adjusts camera angle without removing hardware
- White corrosion-resistant finish blends with camera housings indoors and mild outdoor areas
- Metal construction with durable swivel mechanism supports repeated repositioning
In stock · Ships same business day

$120.00 $80.99 Save $39.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-303HF

Hanwha SBP-303HF Built-In SFP Install Base

Fiber SFP install base for Hanwha PTZ cameras with IP66/IK10 rating
- LC SFP port with 100/1000Base-T Ethernet for extended range connectivity
- Dual 3.5mm audio I/O for two-way communication on PTZ systems
- IP66/IK10 aluminum housing rated −50°C to +55°C operating range
Special Order · Ships in 2-3 weeks

$269.00 $180.99 Save $88.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-303PM

Hanwha SBP-303PM Pole Mount Adapter, White

Pole mount adapter for Hanwha thermal cameras, -50°C to 60°C
- Steel construction with stainless steel straps for secure attachment
- Compatible with TNO-4040T, TNO-4030T, TNO-4050T, TNO-4030TR, TNO-4040TR
- Operates in full humidity range 0–100% RH for outdoor deployment
Special Order · Ships in 2-3 weeks

$79.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-315C

Hanwha SBP-315C Mounting Hole Cover Plate (5-Pack)

White polycarbonate cover plates for PTZ mounts—5 pack, ø326 mm
- UV-resistant polycarbonate construction withstands -50°C to +55°C temperature swings
- Conceals fastener holes on SBP-250WMW and SBP-400WMW wall/pole mounts
- RAL 9003 white finish matches standard camera housing and building aesthetics
In stock · Ships same business day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-315HMW

Hanwha SBP-315HMW White Cap Adapter

White cap adapter for Hanwha dual-sensor cameras with TR20 mount
- Supports PNM-9084RQZ and PNM-9085RQZ multi-sensor platforms
- 6kg load capacity with aluminum construction and RAL9003 white finish
- Compact ø330 x 74mm profile minimizes visual intrusion in flush mounts
In stock · Ships same business day

$70.00 $46.99 Save $23.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-317HMB

Hanwha SBP-317HMB Large Cap Adapter Hanging Mount

Ceiling hanging mount for Hanwha multi-directional and panoramic cameras
- Large cap adapter designed for overhead suspension installations indoors
- Black matte finish keeps discrete low-profile appearance in retail and offices
- Secure mounting support distributes weight efficiently from ceiling infrastructure
Special Order · Ships in 2-3 weeks

$110.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-317HMW

Hanwha SBP-317HMW White Aluminum Hanging Mount for PTZ Cameras

Compact aluminum hanging mount for PTZ cameras, outdoor-rated
- Ø322mm footprint fits standard ceiling tiles without reinforcement
- Aluminum construction with white RAL9003 finish resists corrosion
- 980g weight allows single-technician installation on pendant ceilings
In stock · Ships same business day

$75.00 $50.99 Save $24.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SBP-300WMS1 Stainless Steel Wall Mount

Hanwha SBP-300WMW Gooseneck Wall Mount

Hanwha SBP-301HM5 Ivory Hanging Mount

Hanwha SBP-301HMW3 Cap Adapter

Hanwha SBP-302CM Telescopic Pendant Mount

Hanwha SBP-302CM-12 Extension Pipe for Hanging Mounts

Hanwha SBP-302CMAS Telescopic Pendant Mount with Swivel Adaptor

Hanwha SBP-302CMASW White Telescopic Pendant Mount

Hanwha SBP-302CMB Pendant Mount Back Box

Hanwha SBP-302CMSW White Swivel Adapter

Hanwha SBP-303HF Built-In SFP Install Base

Hanwha SBP-303PM Pole Mount Adapter, White

Hanwha SBP-315C Mounting Hole Cover Plate (5-Pack)

Hanwha SBP-315HMW White Cap Adapter

Hanwha SBP-317HMB Large Cap Adapter Hanging Mount

Hanwha SBP-317HMW White Aluminum Hanging Mount for PTZ Cameras

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading