Camden

SKU: CX-ESF-3

Camden Hollow Metal Frame Face Plate for CX-ED1309 - CX-ESF-3

• Engineered specifically for the CX-ED1309 electromagnetic strike for assured fit.
• Brushed aluminum finish delivers a clean, professional look on hollow metal frames.
• Frame-surface-mount design seats flush, keeping the strike clear of door hardware.

Camden

SKU: CX-ESF-3BZ

Camden Hollow Metal Frame Face Plate for CX-ED1309 - CX-ESF-3BZ

• Engineered specifically for the CX-ED1309 magnetic lock, ensuring precise fit.
• Dark bronze finish provides corrosion resistance in commercial interior environments.
• Passive component requires no power or wiring, simplifying installation on hollow metal frames.

Camden

SKU: CM-333

Camden Hybrid Battery Powered Touchless Switch, 1 wired Relay. Opti...

Touchless 30VDC switch, battery-powered, no AC wiring needed

• Hands-free activation for electric strikes and magnetic locks
• Single wired relay output integrates with access control systems
• Battery hybrid design eliminates need for line power installation

Camden

SKU: CM-TXLF-B

Camden Key FOB base, for wall, belt/visor or wheelchair mounting

Key FOB base with wall, belt, visor, and wheelchair mounting options

• Compatible with Camden access control systems for flexible credential deployment
• Four mounting configurations adapt to building entrances and accessibility needs
• Currently backordered; check availability before ordering for your installation

Camden

SKU: CM-3230

Camden Key Switch (1) SPDT N/O \& N/C Maintained - CM-3230

• SPDT maintained contact outputs both N/O and N/C states at 30VDC simultaneously.
• Accepts 1", 1-1/8", or 1-1/4" mortise cylinders; lock rings and tamperproof fasteners included.
• Hard-wired key control ensures manual override remains functional during network or reader failure.

Camden

SKU: CM-3220

Camden Key Switch (1) SPDT N/O \& N/C Momentary - CM-3220

• SPDT contacts handle strike activation and auxiliary cutoff in one key turn.
• Fits 1", 1-1/8", or 1-1/4" mortise cylinders for direct retrofit with no frame cuts.
• Color-coded 18 AWG leads with heat-shrink sleeves wire directly to strike or relay logic.

Camden

SKU: CM-3200

Camden Key Switch (1) SPST Momentary N/O - CM-3200

• 30VDC dry-contact N/O pulse integrates with any strike, relay, or controller—no protocol required.
• Stainless steel faceplate and brass cylinder rings resist corrosion in outdoor or high-traffic installations.
• Tamper-proof mounting screws with included driver prevent unauthorized removal or cylinder spinning.

Camden

SKU: CM-1170

Camden Key Switch SPDT (1) Momentary \& (1) Maintained - CM-1170

• Dual SPDT contacts (momentary + maintained) eliminate external relay hardware in retrofit installs.
• 30VDC operation integrates directly with standard low-voltage access control panels and power supplies.
• Accepts 1", 1-1/8", or 1-1/4" mortise cylinders for broad retrofit cylinder compatibility.

Camden

SKU: CM-1220

Camden Key Switch SPDT N/O \& N/C Momentary - CM-1220

• SPDT momentary contacts switch N/O and N/C simultaneously for multi-load door control.
• Rated 30VDC, compatible with standard electric strike and electromagnetic lock power supplies.
• One-piece stainless steel cast housing resists corrosion and vandalism at high-traffic entries.

Camden

SKU: CM-1120

Camden Key Switch, SPDT N/O \& N/C Momentary

SPDT momentary key switch for HID access control at 30VDC

• SPDT N/O & N/C outputs eliminate relay overhead in single- or multi-door deployments.
• 30VDC operation integrates directly with standard access control panels—no voltage conversion needed.
• Die-cast aluminum housing with tamperproof screws resists vandalism at high-traffic entry points.

Camden

SKU: CX-MA1213-BK

Camden L \& Z Bracket for 1,200 lb. Magnetic Lock, All-Black Finish

L & Z bracket for 1,200 lb. magnetic locks, all-black finish

• Supports 1,200 lb. load capacity for single and double door setups
• L & Z configuration allows surface or frame-mounted installation options
• 24VDC magnetic lock operation with included door status switch

Camden

SKU: CX-MA1213D

Camden L \& Z Bracket for Double Door 1 200 lb. - CX-MA1213D

• Delivers coordinated 1,200 lb holding force across both leaves of a double door.
• L and Z bracket geometry fits nominal 3-9/16" door widths with 1-3/4" frames.
• Compatible with Camden CX-91 series mag locks operating on 12/24 VDC.

Camden

SKU: CX-MA0613D

Camden L \& Z Bracket for Double Door 600 lb. - CX-MA0613D

• L & Z geometry locks both door leaves simultaneously from a single 24VDC control signal.
• Rated 600 lb holding force supports high-security double-door deployments in vaults and server rooms.
• Bracket design eliminates frame alignment issues common in paired-opening magnetic lock installations.

Camden

SKU: CX-MA0613D-BK

Camden L \& Z Bracket for Double Door 600 lb. - CX-MA0613D-BK

• Supports 600 lb magnetic lock holding force on double-door installations.
• Operates on 24V DC for direct integration with standard access control panels.
• All-metal black construction resists sag and warping through repeated door cycling.

Camden

SKU: CX-MA0610-BK

Camden L Bracket for 600 lb. Magnetic Lock - CX-MA0610-BK

• Structural L-bracket supports 600 lb magnetic lock strike assemblies without flex.
• L geometry distributes shear load across vertical and horizontal frame members.
• Black powder-coat finish suits retrofit and new-construction 24VDC access control installs.

Camden

SKU: CX-MA1210D

Camden L Bracket for Double Door 1 200 lb. Magnetic - CX-MA1210D

• L-bracket assembly for 1200 lb double-door magnetic lock installs
• Supports the holding-force load across both door leaves
• 24VDC compatible with Camden double-door mag lock hardware