Camden

SKU: CV-TXM-2

Camden 2 Button 433 Mhz. key fob for MProx-BLE - CV-TXM-2

• AES-128 rolling code blocks replay and cloning attacks on every 433.92 MHz transmission.
• Dual buttons enable separate unlock and auxiliary command mapping during MProx-BLE provisioning.
• CR2032 battery with LED press-confirmation simplifies field battery-life monitoring and replacement.

Camden

SKU: CV-603

Camden 2 Door MProx-BLE controller with 433 Mhz. - CV-603

• Manages 2 reader inputs and 2 relay outputs for dual-door control in one compact unit.
• Stores 2,000 user profiles and 3,000 event logs with no external database required.
• Built-in 433MHz receiver supports wireless REX where running sensor cable isn't feasible.

Camden

SKU: CM-550SK

Camden 20 000 Users Surface Mount (1) Form ‘C’ Relays - CM-550SK

• Supports 20,000 user accounts, eliminating credential storage limits at the controller.
• TCP/IP connectivity enables centralized remote management and real-time audit logging.
• Native HID reader support lets you leverage existing iClass and MIFARE infrastructure.

Camden

SKU: CX-ED-LIP2

Camden 2\" Lip Extension for CX-ED1079 and - CX-ED-LIP2

• Shifts strike lip 2 inches forward to match non-standard frame rabbet depths.
• Mounts directly to CX-ED1079 or CX-ED-2079 housing using existing holes—no brackets.
• Passive metal hardware preserves full holding force and fail-safe/fail-secure operation.

Camden

SKU: CI-PBS3

Camden 3 button OPEN/CLOSE/STOP NEMA 1 3 A @ 250 VAC - CI-PBS3

• Three independent momentary contacts (OPEN/CLOSE/STOP) give direct mechanical gate control.
• Rated 3A @ 250VAC, compatible with any gate operator accepting momentary switch inputs.
• Stainless steel NEMA 1 enclosure suits indoor and protected industrial mounting locations.

Camden

SKU: CI-PBU3

Camden 3 button, OPEN/CLOSE/STOP, NEMA 1, Surface Mount, 5 A @ 30 VDC

3-button control panel for door automation, NEMA 1 surface mount

• Independent OPEN, CLOSE, STOP commands at 5 A @ 30 VDC

Camden

SKU: CI-3BX

Camden 3 button, OPEN/CLOSE/STOP, NEMA 4, UL/CSA Rated, 3 A @ 240 VAC

3-button control station for doors and gates, NEMA 4 outdoor rated

• Open/Close/Stop buttons control 240VAC circuits up to 3 amperes
• NEMA 4 enclosure rated for outdoor and exposed mounting locations
• UL/CSA certified for door access and gate control system integration

Camden

SKU: CX-EPD1289L

Camden 3/4\" Surface mount Grade 1 RIM strike with - CX-EPD1289L

• ANSI/BHMA Grade 1 rated at 1,500 lb static strength resists forcible entry.
• Tolerates 15 lb preload—reliable in misaligned frames or HVAC pressure zones.
• Field-selectable 12/24VDC AC/DC cuts SKU count; non-handed fits left or right.

Camden

SKU: CX-MA0614-38

Camden 3/8\" Filler Plate for 600 lb. Magnetic - CX-MA0614-38

• Bridges frame-depth gaps with a fixed 3/8" offset to restore full 600 lb. holding force.
• Installs using the existing strike fastener pattern — no additional drilling or hardware required.
• Compatible with all surface-mount and mortise-mount variants in the Camden 600 lb. 24VDC series.

Camden

SKU: CX-MA1214-38D

Camden 3/8\" Filler Plate for Double Door 1 200 - CX-MA1214-38D

• Bridges frame-to-armature gaps on double doors, preserving full 1,200 lb holding force.
• Designed for 24VDC magnetic lock installations with Camden CX-91 series hardware.
• Mechanical fastening required; eliminates partial engagement caused by frame geometry offsets.

Camden

SKU: CM-45/8B54SE1

Camden 4-1/2\" Push Plate Switch Icon \& Push to - CM-45/8B54SE1

• TCP/IP connectivity integrates directly into enterprise access control with no gateway hardware.
• 30VDC low-voltage operation simplifies wiring and meets safety requirements in tenant areas.
• Surface-mount form factor cuts retrofit costs on standard door frames and wall installations.

Camden

SKU: CM-45/8B55SE1

Camden 4-1/2\" Push Plate Switch Icon \& Push to - CM-45/8B55SE1

• TCP/IP communication integrates directly into networked access control architectures.
• 30VDC operating power aligns with standard access control panel supply configurations.
• Flush-mount push-to-lock plate delivers tactile activation for electronic strike control.

Camden

SKU: CM-45/454SE1

Camden 4-1/2\" Push Plate Switch Wheelchair \& - CM-45/454SE1

• TCP/IP connectivity enables remote monitoring and integration with existing access control platforms.
• 30VDC low-voltage operation is compatible with standard access control power supply infrastructure.
• Credential-independent push-plate activation supports ADA-compliant, hands-free entry at designated doors.

Camden

SKU: CM-45/455SE1

Camden 4-1/2\" Push Plate Switch Wheelchair \& - CM-45/455SE1

• TCP/IP communication eliminates analog relay runs, simplifying IP access control wiring.
• Operates at 30VDC, compatible with standard commercial access control power supplies.
• Wall and pole mount options support flexible deployment in corridors and entryways.

Camden

SKU: CM-45/8B

Camden 4-1/2\" Push Plate Switch, \

4-1/2" networked push plate for TCP/IP access control systems

• 30VDC operation with TCP/IP communication for IP-based door control
• Push-to-exit or request-to-exit function in standard or surface-mount
• Integrates into networked security platforms for remote monitoring

Camden

SKU: CX-WC18

Camden 4-1/2\" Wide Column™ Switch with LED - CX-WC18

• TCP/IP connectivity enables remote monitoring and BMS integration without added hardware.
• 4-1/2" column-mount profile fits narrow architectural spaces, restroom entries, and vestibules.
• Onboard LED annunciator displays door state and occupancy, eliminating need for external signage.