Warehouse Data Capture
Sub categories
Showing Results for Warehouse Data Capture
-
Lifesafety Power
SKU: FPV102-E1
Lifesafety Power FPV102-E1 10A/12V Ps/Enclosure
- Delivers 10A at 12VDC (120W) to power 4–6 IP cameras or mixed access control loads.
- Enclosed form factor shields power electronics from moisture and accidental contact.
- Centralizes 12VDC distribution from a single node, simplifying multi-device wiring.
$376.00 $271.99 Save $104.01 -
Lifesafety Power
SKU: FPV102-R8E1
Lifesafety Power FPV102-R8E1 10A/12V 8 Lock Outputs
- Centralized 12V/10A regulated supply drives up to 8 independent relay lock outputs.
- Eight onboard relay outputs eliminate discrete relay banks in access control cabinets.
- Cabinet-mount form factor suits mag locks, electric strikes, and REX device deployments.
$508.00 $367.99 Save $140.01 -
Lifesafety Power
SKU: FPV104-2D8E1
Lifesafety Power FPV104-2D8E1 10A/24V 16 Auxillary Outputs
- Regulated 24VDC at 10A powers up to 16 downstream devices from one source.
- 16 auxiliary outputs reduce panel footprint and simplify access control wiring.
- Supports cameras, electric strikes, mag locks, and relay modules on a 24V rail.
$486.00 $349.99 Save $136.01 -
Lifesafety Power
SKU: FPV104-D8E1
Lifesafety Power FPV104-D8E1 10A/24V 8 Auxillary Outputs
- 10A at 24VDC regulated output powers multiple readers, strikes, and sensors from one source.
- 8 independently supervised auxiliary outputs enable per-circuit fault detection and isolation.
- Cabinet-mount design centralizes distributed 24VDC power for access control and intrusion panels.
$456.00 $329.99 Save $126.01 -
Lifesafety Power
SKU: FPV104-E1
Lifesafety Power FPV104-E1 10A/24V Ps/ Enclosure
- Delivers regulated 24VDC at 10A to support mid-sized camera and reader arrays.
- Wall- or rack-mount enclosure centralizes DC distribution, eliminating per-device wall-warts.
- Terminal blocks accept 18–14 AWG copper wiring for standard low-voltage field connections.
$426.00 $307.99 Save $118.01 -
Lifesafety Power
SKU: FPV104-R8E1
Lifesafety Power FPV104-R8E1 10A/24V 8 Lock Outputs
- Regulated 24VDC at 10A continuous output powers up to 8 electromagnetic lock circuits.
- Eight individual outputs consolidate mid-scale door control wiring into a single supply.
- Sized for 4–8 door deployments; calculate per-lock draw to stay within 10A total.
$549.00 $396.99 Save $152.01 -
Lifesafety Power
SKU: FPV4-B100E1
Lifesafety Power FPV4-B100E1 2A/12V 2A/24V
- Switchable 12V/24V output eliminates stocking separate PSUs for mixed-voltage jobs.
- 2A per output supports 2–4 compact dome cameras on a single 12V branch.
- Compact form factor fits shallow wall-mount or DIN rail enclosures with constrained space.
$406.00 $266.99 Save $139.01 -
Lifesafety Power
SKU: FPV4-R8E1
Lifesafety Power FPV4-R8E1 4A 8 Lock Outputs
- 4A at 12VDC across 8 relay outputs supports up to eight mag locks independently.
- Per-output fusing and supervision enables granular door-level fault diagnostics.
- 75W, 120VAC input simplifies single-enclosure power management for multi-door installs.
$395.00 $285.99 Save $109.01 -
Lifesafety Power
SKU: FPV6-B100E1
Lifesafety Power FPV6-B100E1 4A/12V 4A/24V
- Dual-rail 12 VDC and 24 VDC outputs at 4 A each eliminate a second power supply.
- 48 W on 12 V and 96 W on 24 V rails support cameras, readers, and door strikes.
- Compact wall-mount form factor suits single-door and small-system access deployments.
$416.00 $273.99 Save $142.01 -
Lifesafety Power
SKU: FPV6-D8E1
Lifesafety Power FPV6-D8E1 6A 8 Auxillary Outputs
- 6A regulated output prevents voltage droop when camera resets and door strikes overlap.
- 8 independently supervised outputs let you isolate faults per device without system-wide impact.
- Battery backup integration enables graceful degradation so access control stays active during outages.
$403.00 $291.99 Save $111.01 -
Lifesafety Power
SKU: FPV6-E1
Lifesafety Power FPV6-E1 FPV6-E1
- Supervised outputs detect open circuits, shorts, and power faults per zone.
- Designed for DIN rail or panel-mount integration in commercial security builds.
- Supports multi-zone power distribution for access control and alarm systems.
$372.00 $268.99 Save $103.01 -
Lifesafety Power
SKU: FPV6-R8E1
Lifesafety Power FPV6-R8E1 6A 8 Lock Outputs
- Eight independent lock outputs isolate faults, preventing a single failure from cascading.
- 6A total capacity supports up to eight electric locks, mag-locks, or door strikes.
- Dedicated per-output power routing eliminates voltage sag across neighboring doors.
$500.00 $361.99 Save $138.01 -
Lifesafety Power
SKU: K1E4-DOOR-BOXED
Lifesafety Power K1E4-Door-Boxed K1E4-Door-Boxed
- Operates at 24VDC to match standard electrified lock and reader voltage requirements.
- Centralizes door power distribution, reducing wiring complexity in multi-door deployments.
- Dedicated supply isolates door control power from the access panel for cleaner fault isolation.
$1,118.00 $734.99 Save $383.01 -
Lifesafety Power
SKU: RC250B-C16P
Lifesafety Power RC250B-C16P RC250B-C16P
- 16 independent supervised outputs let you isolate faults without taking down the full system.
- 250W at 24VDC supports mixed loads across cameras, readers, and strike locks from one enclosure.
- 230VAC input suits international and commercial-grade electrical panels without a step-down transformer.
$1,230.00 $807.99 Save $422.01 -
Lifesafety Power
SKU: RC75-C8
Lifesafety Power RC75-C8 75W Single Voltage 120VIN
- 75W output supports 4–6 PoE cameras (10–15W each) or mixed camera and door-strike loads.
- 120VAC single-voltage input eliminates selector switches, simplifying field installation and verification.
- Compact enclosure fits DIN rail or fixed cabinet mounting, reducing footprint in crowded closets.
$699.00 $459.99 Save $239.01 -
Lifesafety Power
SKU: RD150B-16
Lifesafety Power RD150B-16 RD150B-16
- 16 supervised outputs detect wiring faults or load disconnects per channel.
- 300W at 24VDC supports medium-to-large campus access control and alarm loads.
- Per-output supervision cuts troubleshooting time and reduces unplanned downtime.
$879.00 $635.99 Save $243.01
Warehouse Data Capture
Warehouse data capture systems power modern inventory visibility, order accuracy, and real-time operational intelligence. Select from rugged barcode scanners, mobile computers, RFID systems, and industrial label printing platforms designed for high-throughput warehouse and distribution environments.
Plan Your Deployment
- Scan range and barcode symbology support
- Ruggedization and drop resistance requirements
- Wireless connectivity and roaming performance
- Battery life and shift-length operation
- Integration with WMS, ERP, and inventory systems



















