Intercoms & Door Stations
Showing Results for Intercoms & Door Stations
-
Aiphone
SKU: GF-1DK
Aiphone GF-1DK ** Service USE Only **
In stock · Ships same business day$106.00 $57.99 Save $48.01 -
Aiphone
SKU: GF-1P
Aiphone GF-1P 1-Call Button Panel for GT-SW
Single call button panel for Aiphone GT-SW intercom systems
- Single call button entrance panel for GT-SW
- Zinc die-cast corrosion- and impact-resistant build
- Wall or rack mount for door-frame placement
$38.00 $20.99 Save $17.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: GF-2F
Aiphone GF-2F 2-Module Front Frame for GT Series
2-module front frame for GT Series audio/video entrance stations
- 2-module front frame for GT series modular entry
- Structural component for audio and video modules
- 1.4 lb mounting/integration plate for GT panels
$42.00 $22.99 Save $19.01The item has been added -
Aiphone
SKU: GF-2P
Aiphone GF-2P 2-Call Button Panel for GT Series Intercoms
Two-button entrance panel for GT Series intercoms, PoE powered
- 2-call button panel for GT series intercoms
- Each button programmable to specific tenant or station
- Zinc die-cast face for vandal resistance
$40.00 $21.99 Save $18.01The item has been added -
Aiphone
SKU: GF-3F
Aiphone GF-3F 3-Module Front Frame for GT Series
3-module front frame for GT Series intercoms in multi-unit buildings
- 3-module front frame for GT series entrance panels
- Holds three audio, video, or accessory modules
- Modular flexibility for multi-tenant entry points
$56.00 $30.99 Save $25.01The item has been added -
Aiphone
SKU: GF-3P
Aiphone GF-3P 3-Call Button Panel for GT-SW
3-button entrance panel for Aiphone GT-SW multi-tenant systems
- 3-call button panel for GT-SW entrance station
- Each button rings specific tenant unit directly
- Zinc die-cast vandal-resistant face plate
$42.00 $22.99 Save $19.01The item has been added -
Aiphone
SKU: GF-4P
Aiphone GF-4P 4-Call Button Panel
Four independent call buttons for GT series intercom systems
- 4-call button panel for GT series modular entry
- Each button independent for tenant or entry selection
- Zinc die-cast vandal-resistant construction
$42.00 $22.99 Save $19.01The item has been added -
Aiphone
SKU: GF-BP
Aiphone GF-BP Blank Plate
Zinc die-cast blank plate for GT Series modular entrance stations
- Blank zinc die-cast plate for unused GT frame slots
- Closes open positions on modular entrance frames
- Vandal-resistant build matches GT module finish
$34.00 $33.99 Save $0.01The item has been added -
Aiphone
SKU: GFK-PS
Aiphone GFK-PS Pendant Panic Switch
Waterproof pull-cord panic switch for Aiphone GT intercom systems
- Pendant panic switch with pull-cord activation
- Normally closed mechanically latching emergency call
- Integrates with Aiphone GT series intercom systems
$98.00 $97.99 Save $0.01The item has been added -
Aiphone
SKU: GT-102HB
Aiphone GT-102HB Surface Mount Box
Vandal-resistant surface mount box for Aiphone GT Series outdoor access control
- Vandal-resistant 1x2 surface-mount module box
- Holds two GT series entrance modules
- 2.1 lb Japan-made enclosure for outdoor entries
$318.00 $171.99 Save $146.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: GT-103HB
Aiphone GT-103HB 1x3 Module Surface Mount Box
1x3 surface mount box for Aiphone GT Series modular panels
- Vandal-resistant 1x3 surface-mount module box
- Three-module capacity for combined entry stations
- Japan-made enclosure for high-traffic entries
In stock · Ships same business day$376.00 $196.99 Save $179.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: GT-104HB
Aiphone GT-104HB 4-Module Surface Mount Enclosure
4-module vandal-resistant hooded surface mount for GT Series intercom
- 4-module surface-mount enclosure with rain hood
- Hood protects modules from direct rain and dust
- Vandal-resistant for outdoor entry installations
In stock · Ships same business day$486.00 $268.99 Save $217.01The item has been added -
Aiphone
SKU: GT-10K
Aiphone GT-10K 10-Key Digital Keypad Module
10-key numeric keypad module for GT Series intercom access control
- 10-key numeric input keypad for tenant selection and codes
- IP43 dust and splash resistant rating for entry-panel install
- 0.2 lb keypad module powered from GT-DB family base stations
$96.00 $95.99 Save $0.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: GT-1A
Aiphone GT-1A Audio Tenant Station
Audio tenant station for multi-unit buildings, 24V DC powered
- VOX hands-free or push-to-talk simplex two-way audio modes
- Wall or 3-gang box mount surface install for tenant intercom
- 0.95 lb audio tenant station with microphone input
In stock · Ships same business day$144.00 $79.99 Save $64.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: GT-1C7
Aiphone GT-1C7 7" LCD Video Tenant Station
7" LCD video tenant station with 8MP capture for visitor screening
- 7-inch LCD video tenant station, 8MP capture
- Hands-free VOX or push-to-talk operation
- 4096x2160 visitor identification at the door
In stock · Ships same business day$716.00 $395.99 Save $320.01The item has been added -
Add to Cart The item has been addedAiphone
SKU: GT-1C7W
Aiphone GT-1C7W App-Compatible Audio/Video Tenant Station
8MP wall tenant station with mobile app access for multi-unit buildings
- App-compatible 8MP tenant station, 4096x2160 video
- NFC mobile app configuration via smartphone
- 6.12 x 8.25 in wall-mount for residential entries
In stock · Ships same business day$728.00 $390.99 Save $337.01The item has been added
Intercoms & Door Stations
Modern SIP door stations and intercom panels for building entry management. Modular designs support custom button layouts, camera modules, and card reader integration in a single panel frame.
Plan Your Deployment
- Select modular vs. fixed station based on button and feature requirements
- Confirm SIP trunk and auto-provisioning support
- Evaluate weatherproof and vandal-resistant housing for outdoor installation
- Plan call routing: direct dial, directory listing, or receptionist queue
Intercoms & Door Stations — Engineering-Grade Intercom & Audio for Commercial Deployments
This category covers 812 working models of intercoms & door stations sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
SIP-based IP intercoms have largely replaced analog and proprietary platforms. SIP intercoms register with any standard PBX or SIP-compatible VMS, simplifying integration with phone systems and recording infrastructure. Confirm the specific SIP standard supported (RFC 3261, with codecs G.711, G.722, Opus) and any vendor extensions before pairing with a head-end.
Outdoor versus indoor placement drives housing, microphone, and speaker choice. Outdoor intercoms need IP65/IP67 rated housings, wind/echo-canceling microphones, and weather-resistant button faceplates. Indoor units can use lower-cost housings and simpler microphones. For both, audio echo cancellation (AEC) quality is what users notice; cheap intercoms make conversations difficult and drive complaint volume.
Video-enabled intercoms (2N IP Style, Aiphone IX, Axis I8016) integrate camera, two-way audio, and access control in one unit at the door. They eliminate the camera + intercom + reader stack and reduce per-door wiring. The tradeoff is that a single device failure takes out all three functions; design with appropriate redundancy at high-value entrances.
Paging and zone broadcast extend intercom hardware into emergency notification and routine announcements. SIP-based zone paging integrates with the phone system; analog paging via amplifiers and 70V speaker lines remains common in warehouses and large open spaces. Plan zone count, amp wattage, and speaker spacing carefully — under-amped systems are unintelligible at the back of the room.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, 8MP, 5MP, Thermal, 20MP+, 1MP, 3MP |
| IP Rating | IP68, IP65, IP43, IP54, IP56, IP66, IP67, IP30 |
| Connectivity | Wired, Cellular, Wi-Fi |
| Power | PoE, PoE+, AC/DC, PoE++ |
| Channels | 8 |
| Storage | microSD, NAS |
Top Brands in This Category
Frequently Asked Questions
Should I choose a SIP intercom or a proprietary system?
SIP is the safe choice for new deployments — it integrates with standard PBXs, SIP-compatible VMS, and modern unified-communications platforms. Proprietary systems (some legacy Aiphone, Comelit, Axis) tie you to specific head-ends. SIP also future-proofs the investment as PBX choices evolve. Choose proprietary only if you've already committed to a specific platform with strong feature differentiation.
Can I integrate the intercom with my access control?
Yes — most modern IP intercoms expose Wiegand or OSDP outputs to access control panels, or REST APIs for direct integration. Video intercoms (2N, Aiphone IX, Axis I8016) often integrate natively with access control platforms. Confirm specific integrations against the controller and head-end you've chosen — generic ONVIF support isn't sufficient for access-control event handoff.
How many zones do I need for paging?
Zone count follows the building floor plan and operational needs. Typical commercial buildings run 4-8 zones — one per major area or floor. Distribution warehouses and schools commonly run 16-32 zones to support targeted communication. Over-zoning adds amp cost and management complexity; under-zoning forces blanket announcements that aren't useful operationally. Map zones to actual decisions before building the system.
What speaker wattage do I need for outdoor paging?
Outdoor paging requires higher wattage per area than indoor — wind, distance, and ambient noise consume sound pressure. Plan for 15-30W per speaker on a 70V line at 50-100 foot spacing for general announcements. For emergency notification with intelligibility requirements (UL 2572), use horn-type speakers and confirm the speaker layout meets local code's sound-level-at-listening-position requirements.
Do video intercoms work in low light?
Most modern video intercoms (Aiphone IX, 2N IP Style, Axis I8016) include integrated white-light or IR illumination for low-light operation. Confirm the minimum illumination figure and the IR range. For entrances facing direct sun during day and full darkness at night, look for HDR-capable intercoms; cheap units wash out in direct sunlight and lose detail in shadows where faces actually are.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.