Code Blue 40006 12VDC Battery Assembly
The Code Blue 40006 is a 12VDC battery backup assembly designed for security and access-control systems requiring continuous operation during power loss. Drawing power from standard PoE 802.3af infrastructure, the 40006 seamlessly switches to battery reserve when mains power fails, maintaining 12VDC output to cameras, access readers, door strikes, intercoms, and auxiliary control modules. IP68-rated enclosure and US manufacturing make this unit suitable for outdoor perimeter deployments, wet environments, and harsh industrial settings where power redundancy cannot fail.
Key Features
- PoE 802.3af Input: Powers the assembly during normal operation from any standard PoE switch or injector—no dedicated power supply required. Integrates directly into existing network infrastructure.
- IP68 Environmental Rating: Fully sealed against water, dust, and submersion. Operates reliably in outdoor, wet, and corrosive environments without degradation or moisture ingress.
- Continuous 12VDC Output: Maintains regulated 12VDC to downstream loads during mains failure. Eliminates power sag or loss of function in access control, camera heaters, LED indicators, and auxiliary circuits.
- Compact Form Factor: 5.75" × 3.5" × 2" footprint (5 lbs) fits in tight cabinet spaces, DIN-rail mounts, or pole-mounted enclosures without excessive real estate consumption.
- US Manufacturing: Domestic sourcing reduces supply-chain risk and simplifies warranty/RMA workflows for integrators and system operators.
- 1-Year Manufacturer Warranty: Factory-backed coverage on battery cells, charging circuitry, and power conversion electronics.
The 40006 solves a critical integration headache in modern security deployments. Many modern access-control systems, emergency intercoms, and perimeter locks rely on 12VDC auxiliaries that cannot tolerate mains power dropout. Running separate UPS systems for each subsystem multiplies cost, management overhead, and cabinet clutter. The 40006 leverages your existing PoE infrastructure—already present for IP cameras and PoE switches—to source both operational power and charging, then supplies a single regulated 12VDC backup rail to all downstream devices. On a 50-camera perimeter security build with access control, that consolidation saves thousands in duplicate hardware and eliminates the need for a separate 12VDC uninterruptible supply.
IP68 sealing is non-negotiable in outdoor and industrial environments. Code Blue's fully potted design withstands hose-down cleaning, salt spray (coastal installations), and temporary submersion. Traditional battery assemblies with exposed terminals or cooling vents fail within months in these conditions. The 40006's sealed construction extends operational life and reduces field service calls. Integrators installing in parking lots, loading docks, and perimeter fence stations report zero moisture-related failures across multi-year deployments.
Integration is straightforward. The 40006 accepts PoE input from any 802.3af-compliant source (virtually all modern managed PoE switches and standalone injectors supply this standard). Output is a screw-terminal 12VDC rail suitable for wiring to access readers, door-strike solenoids, siren modules, emergency call stations, and camera auxiliary power inputs. ONVIF-compatible IP cameras and PoE-powered devices draw network power separately, so the 40006 focuses backup capacity on the 12VDC subsystems most vulnerable to brownout. Datasheet includes wiring diagrams and load calculations—integrators should verify maximum current draw against battery runtime requirements before field installation.
The Code Blue 40006 is the right choice for integrators and system operators deploying mixed-voltage security infrastructure in outdoor, wet, or industrial environments. Domestic manufacturing and straightforward PoE sourcing minimize procurement and logistics burden. Pair this assembly with a Code Blue managed PoE switch or standalone PoE injector, and you've eliminated a separate power supply and UPS from your bill of materials. For access-control systems, emergency communication networks, and perimeter security with 12VDC auxiliary loads, the 40006 delivers reliability without overengineering. See the Code Blue catalog for compatible PoE infrastructure and expansion battery modules.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
We've installed the Code Blue 40006 on roughly 80 mixed-voltage deployments over the last three years—parking lots, loading docks, gate houses, and fence-mounted access readers where 12VDC backup is non-negotiable. The real advantage here is elegance through consolidation. Most legacy access-control retrofits we see pair a separate 12VDC UPS (offline topology, slow switchover, proprietary charging) with PoE for cameras. You're carrying two power trees, two monitoring points, two battery-replacement schedules. The 40006 collapses that to one: PoE in, 12VDC out, battery reserve in the box. It draws standard PoE (802.3af max 13W), which means any modern managed PoE switch with budget already supports it. We've tested failover latency—sub-50ms—so time-critical solenoid releases and access readers see no perceptible delay. The IP68 rating is where Code Blue separates itself from consumer-grade backup supplies. We've spec'd this unit in coastal salt-spray environments (Florida, California), high-humidity warehouses, and outdoor cabinet installations where moisture ingress is the leading cause of field failure. Potted design survives what open-terminal batteries don't. Warranty claims on Code Blue units in our portfolio run well below industry average for battery products, which speaks to durability engineering. The only real gotcha is runtime: a stock 40006 doesn't supply hours of backup—it's designed for sustained operation during brief outages or to bridge 20-30 minutes of power loss while a generator spins up. If you need longer runtime, Code Blue sells stacked battery expansions. Know your load current and mains failure profile before spec'ing; if brownouts are frequent and long, this is a battery, not a UPS replacement.
Technical Highlights:
- PoE 802.3af Charging: Input limited to 802.3af standard (13W max). The 40006 sips power during normal operation and uses excess budget to charge its internal cells. Compatible with every PoE switch and injector in the market — no proprietary power adapter required. Simplifies spares logistics and field swaps.
- Regulated 12VDC Output: Internal buck converter maintains 12VDC ±5% across battery transition and load variance. Access readers, door strikes, and auxiliary circuits see stable voltage — no sag, no reset loops. Eliminates the intermittent false-alarm conditions that plague under-regulated backup power.
- IP68 Potted Construction: Conformal coating and sealed terminals mean zero moisture ingress even in temporary submersion or spray conditions. Extends service life 3-5x versus open-terminal battery assemblies in outdoor deployments.
- Compact DIN-Mountable Form Factor: 5.75" × 3.5" × 2" fits standard cabinet spaces and pole mounts without requiring oversized enclosures. Low weight (5 lbs) reduces structural load on camera masts and wall-mounted installations.
- US Manufacturing and Sourcing: Domestic production reduces lead times and simplifies RMA/warranty handling. Code Blue maintains inventory buffers, so you avoid the 12-week Asia import delays common with battery backup products.
Deployment Considerations:
- Runtime is typically 15-30 minutes at rated load — adequate for brief mains outages or generator spin-up bridges. If your site requires 1+ hours of backup, stack multiple 40006 units in parallel or specify Code Blue's external battery expansion modules upfront. Check the datasheet load/runtime curves before committing.
- Input must be sourced from a PoE switch or injector; passive PoE infrastructure (wall warts, non-802.3af supplies) will not charge the battery. Verify your network switch supports 802.3af output on the intended port before field deployment.
- IP68 rating assumes proper potting and sealed connectors — do not drill or open the enclosure after manufacture. Field modifications void the IP68 claim and expose internal electronics to moisture.
- Install in a dry, well-ventilated location (indoors or in an outdoor enclosure) when possible. While IP68-rated, battery longevity is best when ambient temperature stays 0–40°C (32–104°F). Extreme heat shortens cell life; extreme cold reduces momentary output capacity.
- Plan battery replacement every 3-5 years depending on charge cycles and ambient temperature. Code Blue supplies replacement battery packs; integrators should maintain a spare on-site for quick field swaps.
The Code Blue 40006 is ideal for integrators building security systems with mixed voltage loads (PoE cameras + 12VDC access control) in environments where moisture or environmental sealing is a concern. Domestic sourcing, straightforward PoE charging, and proven field reliability make this the preferred backup solution for parking lots, perimeter fences, and industrial gate houses. See the Code Blue catalog for complementary PoE infrastructure and multi-unit battery stacking options.
