STI

STI

SKU: STI-9764-R

STI STI-9764-R Horn/Strobe Damage Stopper L Series Wall Red

• 9-gauge steel wire with polyester coating resists corrosion in indoor environments.
• UL-listed per UL464, UL1638, UL1480, CAN/ULC-S525, S526, and S541 standards.
• Mounts directly to wall with included anchors; removable for quick device servicing.

STI

SKU: STI-9708-R

STI STI-9708-R Horn/Strobe/Speaker Damage Stopper Controller

• TCP/IP communication enables integration into existing IP-based security networks.
• UL/cUL listed; meets UL1638, UL464, UL1480, and CAN/ULC safety standards.
• Supports wall, ceiling, or rack mounting for flexible deployment across zones.

STI

SKU: KIT-71101A-R

STI KIT-71101A-R Stopper Station Red Back Box & Spacer Kit

• Red-finish back box matches STI Stopper Station line for a consistent install.
• Spacer shims let you dial in bolt clearance on surface or recessed door frames.
• Four included wall fixings and cable entry inserts speed up compliant mounting.

STI

SKU: EM1212DOC

STI EM1212DOC System Record Documents Enclosure Metal Thumb Lock

• Thumb lock cylinder provides key-based document access independent of electronic systems.
• Mounts on existing STI enclosure studs—no drilling or additional hardware required.
• Four sealing washers included to ensure weather-resistant sealing at the mounting interface.

STI

SKU: WRP2-G-11

STI WRP2-G-11 Waterproof ReSet Call Point Controller

• IP67-rated polycarbonate enclosure withstands dust ingress and water jets.
• Operates at 12–24V DC or 125–250V AC, supporting 3A draw on most panels.
• Hardwired switch integrates with conventional fire alarm and emergency networks.

STI

SKU: UB-2

STI UB-2 2" Universal Button

2" push button for 30VDC magnetic lock door access control

• Operates on 12–24 VAC/VDC auxiliary power, fitting existing door control infrastructure.
• Dual contact sets (NC, NO/COM) support both fail-safe and fail-secure wiring configurations.
• Includes three push buttons and five messages, enabling on-site label customization without extras.

STI

SKU: UB-1PN

STI UB-1PN Universal Pneumatic Button

Wired pneumatic button for magnetic locks, TCP/IP and RS-232 control

• Operates at 30VDC, compatible with standard commercial access control power supplies.
• TCP/IP and RS-232 dual protocol support integrates with modern and legacy control systems.
• Hard-wired design eliminates RF interference risk in congested industrial environments.

STI

SKU: UB-1

STI UB-1 Universal Button Magnetic Strike

30VDC magnetic strike with universal push-button activation for access control

• Operates at 30VDC, compatible with any control panel that drives a relay output.
• Ships with three illuminated push buttons and five swappable button message inserts.
• Supports both fail-safe and fail-secure wiring modes via control circuit termination.

STI

SKU: STI-SA5600-B

STI STI-SA5600-B Select-Alert Siren/Strobe Controller

• Runs on 9VDC for easy integration with battery backup or standard access control supplies.
• Dry contact relay output (12VDC, 50mA) triggers external sirens and strobes via Form C wiring.
• Supports HID and NFC/13.56MHz credentials with up to 32 enrolled users per controller.

STI

SKU: STI-SA5500-B

STI STI-SA5500-B Select-Alert Siren/Strobe Controller

Dry contact relay controller for siren/strobe alerts with dual credential support

• Dry contact relay output at 12VDC/50mA drives siren and strobe without a separate relay module.
• Supports HID 125kHz and NFC 13.56MHz credentials from one controller, simplifying mixed-reader sites.
• Stores up to 32 user credentials locally, enabling offline access control without a central database.

STI

SKU: STI-SA5000-G

STI STI-SA5000-G Select-Alert Mini Controller

Compact networked lock controller with 9VDC power and TCP/IP connectivity

• TCP/IP connectivity integrates directly into existing LAN without protocol converters.
• 9VDC input is compatible with battery-backup systems where PoE is unavailable.
• Supports wall, pendant, corner, and rack mounting to fit retrofit constraints.

STI

SKU: STI-SA5000-B

STI STI-SA5000-B Select-Alert Mini Controller

Compact controller for 32 users with HID and NFC support

• Manages up to 32 credentials natively for HID proximity and 13.56 MHz NFC cards.
• N.C. dry contact output at 12 VDC/50 mA drives standard electromagnetic locks directly.
• Runs on 9 VDC input; optional internal battery supports installations with limited AC access.

STI

SKU: STI-MBP1010

STI 14 Gauge Backplate for STI-EM111103 and - STI-MBP1010

• 14-gauge steel construction delivers rigid, tamper-resistant mounting for strike assemblies.
• Engineered specifically for STI-EM111103 and STI-EM121204 strikes—not a universal fit.
• Operates at 9VDC; run power separately from access control wiring to avoid noise coupling.

STI

SKU: STI-HTR075T

STI STI-HTR075T 75W Radiant Heater with Thermostat

75W radiant heater with thermostat for outdoor electronic locks

• 75W output prevents electronic strike freeze-up in sub-zero outdoor installations.
• Runs on 9VDC aux output—no step-down converter needed on existing access control panels.
• Integrated thermostat cycles heat on demand, reducing power draw and extending strike life.

STI

SKU: STI-EM151804

STI STI-EM151804 Metal Protective Cabinet 15x18x4

• 15×18×4 in. metal enclosure shields access control electronics from tampering indoors.
• Pre-drilled threaded studs eliminate field drilling, preserving enclosure integrity on install.
• Four sealing washers included ensure proper electrical isolation at all connection points.

STI

SKU: STI-EM121204

STI STI-EM121204 Metal Protective Cabinet 12x12x4

• Mounts to existing enclosure studs with no drilling, cutting retrofit install time.
• Four included sealing washers provide environmental protection at all mount points.
• Integrated lock/strike assembly secures access control panels and power supplies.

STI

SKU: STI-EM111504

STI STI-EM111504 Metal Protective Cabinet 11 x 15 x 4

• 11×15×4 in. metal cabinet fits electrical closets and retrofit enclosure bays.
• Mounts to existing enclosure studs via EM1212DOC-U system — no new drilling required.
• Four included sealing washers protect mounting points against moisture and dust ingress.

STI

SKU: STI-EM111103

STI STI-EM111103 Metal Protective Cabinet 11x11x3

• Mounts to existing door frame studs via EM1212DOC-U bracket—no new drilling required.
• Four sealing washers protect mounting points against water and dust ingress.
• Pre-punched knockout accepts H07504 thumb lock cylinder and conduit pass-through.

STI

SKU: STI-EM08073.5

STI STI-EM08073.5 Metal Protective Cabinet 8x7x3.5

• 8×7×3.5 in. steel enclosure shields access control boards and strike hardware indoors.
• Four included sealing washers guard against dust and moisture ingress at the enclosure.
• EM1212DOC-U bracket mounts to existing enclosure studs — no drilling required.

STI

SKU: STI-EM07123.5

STI STI-EM07123.5 Metal Protective Cabinet 7x12x3.5"

• Mounts to existing enclosure studs with no drilling, cutting retrofit install time.
• USB-C female-to-female keystone jack supports digital storage module integration.
• Four included sealing washers protect knockout points for indoor enclosure integrity.