Bosch · B520

Bosch B520 Auxiliary Power Supply Module

Regulated 24/7 DC power module for Bosch access control systems

• B520 auxiliary power supply with regulated DC output
• UL listed for B3512-B9512G panel series use
• Stable voltage prevents reader misreadings

Bosch · PSU-KP DSPK

Bosch PSU Kp-series AND Dspk Panels (power Supply) - PSU-KP DSPK

Universal voltage power supply designed to feed 24VDC control logic to Bosch AND and DSPK security panels and relay modules

• Universal voltage power supply for Bosch AND and DSPK relay panels
• Accepts North American line voltage with 24VDC control logic output
• UL/cUL plus Buy American Act and Trade Agreements Act compliant

Camden · CX-PS300UL

Camden 3 Amp Power Supply with (4) Fused Outputs (2 - CX-PS300UL

3 Amp power supply designed to support 24VDC access control systems

• Delivers 24VDC at 3A total across four independently fused 2A output circuits.
• Per-circuit fusing isolates faults, cutting troubleshooting time on multi-door deployments.
• TCP/IP compatibility supports integration with networked access control controllers.

Camden · CX-PS600UL

Camden 6 Amp Power Supply with (8) Fused Outputs (2 - CX-PS600UL

24VDC power supply rated for 6 amps continuous output, designed to feed distributed access control loads—magnetic locks, electric strikes, relays

• Eight independently fused 2A outputs isolate circuit faults without dropping the full installation.
• Auto-switches to battery backup when AC mains falls below 72.5V, keeping locks energized.
• Accepts 120/240VAC input and delivers 24VDC at 6A continuous for multi-door deployments.

Camden · CX-33PS

Camden Advanced Logic Control Relay \& Power Supply - CX-33PS

Pre-wired control relay and power supply cabinet designed for small-to-medium access control installations requiring centralized logic management and

• Pre-wired 24VDC/2A UL-listed supply eliminates a separate PSU on 2-door installs.
• Supports up to 2 mag locks or electric strikes with 4 push-button inputs via dry contact.
• Rated −20°C to 70°C with 5 conduit knockouts for indoor or protected outdoor mounting.

Camden · CX-EMF-2PS

Camden CX-EMF-2PS Door Control and Power Supply Cabinet

Microprocessor-controlled relay module paired with integrated 20VDC power delivery, designed to manage single or multi-door access control systems

• Accepts 7 dry contact inputs, enabling connection of readers, keypads, and RTE buttons.
• Five 3A Form C relay outputs drive magnetic locks and strikes across multi-door deployments.
• Microprocessor control with DIP switch mode selection allows logic changes without hardware swaps.

Camden · CX-PS13V3

Camden CX-PS13V3 Variable Output Linear Power Supply

Compact linear power supply designed for electric strikes, door locks, access control readers, and other 24VDC security devices

• Selectable fixed voltages (6–24VDC) or continuous pot adjustment suits varied strike loads.
• Integrated gel cell charging and automatic AC-failure failover maintain door access during outages.
• Resettable PPTC fuse and sub-40mV ripple prevent nuisance lockouts on sensitive solenoid strikes.

Camden · CX-PS150UL

Camden CX-PS150UL 1.7 Amp Power Supply with Dual Fused Outputs

12/24VDC regulated power supply rated 1.7 amps total output, designed to power electromagnetic locks, strikes, and auxiliary access control devices

• Dual independently fused outputs isolate 1A lock circuit from 200mA auxiliary load.
• Built-in 500mA SLA/gel-cell charger enables automatic failover during AC power loss.
• UL294 Level 4 and ULC-S533 listed for commercial access control and egress doors.

Chatsworth · UPSRAILKIT4B

Chatsworth 4 Post Rail KIT FOR 5-10KVA UPS - UPSRAILKIT4B

Chatsworth · XMERPDU2

Chatsworth 6000W Isolation Transformer PDU; 2U; - XMERPDU2

Chatsworth · 46075-502

Chatsworth Relay Rack 6 FT 6 SS - 46075-502

Chatsworth · 46075-505

Chatsworth Relay Rack 7FT 6 SS - 46075-505

Chatsworth · 46075-507

Chatsworth Relay Rack 8 FT 8 SS - 46075-507

Chatsworth · 60102-004

Chatsworth RIM 1000 2U 48V 8 Inputs 2 Relay Outputs - 60102-004

Chatsworth · 60102-005

Chatsworth RIM 1000 2U 48V A 20 Inputs 10 Relay - 60102-005

Chatsworth · 60114-002

Chatsworth RIM-750 Motion Sensor Power Supply - 60114-002

Chatsworth · 60113-002

Chatsworth RIM-750 Smoke Detector Power Supply - 60113-002

Chatsworth · XMERPDU4

Chatsworth Step Down Isolation Transformer 10KVA; 3U; - XMERPDU4

Chatsworth · XMERPDU1

Chatsworth Step Down Isolation Transformer 1500W; 2U; - XMERPDU1

Chatsworth · XMERPDU3

Chatsworth Step Down Isolation Transformer 6000W; 3U; - XMERPDU3

Chatsworth · SNMP2

Chatsworth UPS Communication Card - Remote Monitoring - SNMP2

Citizen · 91AD-JU

Citizen 91AD-Ju AC Adapter For CBM910II Cec Compliant-Po

Dedicated AC power adapter designed for the CBM910II mobile printer

• AC adapter for Citizen CBM910II mobile printer
• CEC compliant for regulatory energy efficiency
• OEM power supply for mobile printer field operation

Code Blue · SLNP0101

Code Blue 1-Port PoE Injector Indoor Use Only - SLNP0101

Single-port PoE injector designed to deliver power and data over ethernet to Code Blue VoIP communication devices, eliminating the need for separate

• Single-port PoE injector delivers power and data over one Ethernet cable.
• Compatible with Code Blue IP1500, IP2500, IP5000, LS1000, LS2000, and IA4100.
• Mounts to wall, pole, or rack rail — no separate power supply required indoors.

Code Blue · SLNP0134

Code Blue 1-Port PoE Injector Outdoor- Indoor Use Only - SLNP0134

1-port PoE injector designed to deliver power and data over a single Ethernet line to Code Blue VoIP speakerphones and communication devices

• Delivers power and data over a single Ethernet run, eliminating need for a PoE switch.
• Supports CB1/2/4/5/6/9, CBRT towers, and legacy LS/IP/IA series Code Blue devices.
• Mounts to wall, pole, recessed, or rack positions to fit distributed comm installations.

Code Blue · 40020

Code Blue 40020 Fuse Kit for DIN Rail Power

Replacement fuse kit designed for specific Code Blue paging amplifiers that utilize a 12-24V DC power input

• Replacement fuse kit maintains overcurrent protection in 12–24V DC security systems.
• DIN rail compatible design integrates directly with existing rail-mount power supplies.
• Multiple fuses per kit support ongoing maintenance and emergency swap-out scenarios.

Code Blue · 40021

Code Blue 40021 Power Supply Assembly

Rack-mounted PoE 802.3af distribution for security systems

• IP68-rated assembly handles moisture-heavy or sealed environments
• Centralized PoE power management for multiple networked devices
• Rack mount form factor organizes infrastructure in server rooms

Code Blue · 40047

Code Blue 40047 Solar Top Cap Metal

Replacement metal top cap designed to seal and protect the solar panel assembly on Code Blue solar-powered security devices

• Metal housing resists corrosion, salt spray, and thermal cycling in outdoor deployments.
• Engineered gasket seal blocks water and dust ingress, protecting solar cell and optics.
• Drop-in replacement fit eliminates enclosure swap, reducing site downtime on repairs.

Code Blue · 40079

Code Blue 40079 Charger 10 Amp NightCharge

10 amp charger designed to power and maintain security equipment and accessories in the field

• 10 A charging capacity cuts recharge time for field-deployed Code Blue equipment.
• 12–24 V DC dual-voltage support covers a broad range of portable security devices.
• Compatible with paging amplifiers and auxiliary accessories for unified field power.

Code Blue · 40100

Code Blue 40100 Transformer 210VA/120-240-277V

Power transformer designed for security and audio system installations requiring stable, regulated voltage conversion from standard building

• 210VA capacity handles mid-sized paging systems without transformer saturation.
• Accepts 120V, 240V, or 277V input—one SKU covers all standard building supplies.
• Isolated output eliminates ground-loop hum and RF interference on audio lines.

Code Blue · 40104

Code Blue 40104 Multi-Tap Power Supply Assembly

Rack-mount PoE supply with IP68 sealing for outdoor 120V/240V multi-tap

• IP68 sealed design operates in wet, dusty, or harsh outdoor conditions
• 120V/240V multi-tap input adapts to varying site power configurations
• PoE 802.3af delivery at rack level for networked security devices

Code Blue · 40111

Code Blue 40111 Din Rail Power with PoE

DIN rail-mounted power supply with integrated PoE capability, designed for professional security and network infrastructure deployments

• Mounts on standard 35mm DIN rail, eliminating dedicated bracket engineering.
• Integrated PoE injection removes standalone injectors for runs under 100 meters.
• Switchable 12–24V DC output supports legacy door hardware and modern networked devices.

Code Blue · 40184

Code Blue 40184 Din Rail Power Harness 1/5/RT

Replacement power distribution harness designed for security and audio paging systems that require synchronized 12-24V DC power delivery to multiple

• Supports 12–24V DC dual-voltage input, covering legacy and modern power supply configs.
• DIN rail form factor integrates directly into industrial control enclosures without redesign.
• Parallel connectivity feeds multiple devices simultaneously, reducing wiring complexity.

Code Blue · 40186

Code Blue 40186 Din Rail Power Supply

24V DC power supply designed for din rail mounting

• Delivers regulated 24V DC output for stable, uninterrupted power to security devices.
• Mounts on standard 35mm DIN rail, minimizing cabinet footprint in compact installations.
• Compatible with Code Blue paging amplifiers and control modules for simplified integration.

Code Blue · 40277

Code Blue 40277 Converter Kit Solar to NC

Power converter kit designed to adapt solar or 12-24V DC power sources to a 24V DC output

• Converts solar input to NC output, enabling legacy NC device integration.
• Supports 12–24V DC range, compatible with Code Blue paging amplifiers.
• Modular PDU-type design allows flexible installation across security topologies.

Code Blue · 40299

Code Blue 40299 Solar/Hardwire Conversion Kit

Conversion kit designed to adapt solar power systems or other power sources to provide a stable 24V DC output

• Accepts solar or hardwired 12–24V DC input, enabling hybrid and backup power deployments.
• Included mounting strap supports secure field installation without additional hardware.
• Serves as a direct replacement or upgrade component for existing Code Blue security systems.

Code Blue · 40395

Code Blue 40395 Harness A700 Plug Strip

Replacement harness and plug strip assembly for Code Blue A700 series paging amplifiers

• Drop-in replacement for Code Blue A700 series paging amplifiers; no modification needed.
• Supports 12–24V DC operation, maintaining compatibility across varied power configurations.
• Molded connector design ensures secure, repeatable mating during maintenance or reconfiguration.