-
Pelco
SKU: MRCA
Pelco MRCA 1.5 NPT Ceiling Flange Pendant Mount
1.5" NPT ceiling flange pendant mount, IP66 rated for Pelco systems
- 1.5" NPT thread size fits standard commercial conduit without adapters
- IP66 rating handles direct rain spray and dust in covered outdoor areas
- Flush ceiling mount integrates with Pelco PTZ and camera housing systems
Special Order · Usually Ships in 2-3 Weeks$58.67 $35.99 Save $22.68The item has been added -
Pelco
SKU: WCPA
Pelco WCPA Wall Bracket Adapter Plate
Adapter plate resolves Pelco camera-to-bracket mounting mismatches
- Precision metal construction eliminates field fabrication and maintains load integrity
- Works across Pelco camera systems and bracket families for flexible installations
- NDAA Section 889 compliant for government and regulated facility deployments
Special Order · Usually Ships in 2-3 Weeks$40.07 $32.99 Save $7.08The item has been added -
Pelco
SKU: IMV-PA
Pelco IMV-PA Pendant Mount Adapter for Sarix Value Minidomes
Pendant mount adapter converts Sarix Value minidomes for drop-rod installation
- PoE++ pass-through powers camera on pendant arm or conduit drop
- Converts surface-mount minidomes to pendant configuration for high-ceiling spaces
- NDAA Section 889 compliant, IK10 vandal-rated housing in white finish
Special Order · Usually Ships in 2-3 Weeks$40.07 $32.99 Save $7.08The item has been added -
Pelco
SKU: OCTEX1/2-3/4P
Pelco OCTEX1/2-3/4P Conduit Gland Reduction NPT
3/4 to 1/2 NPT reduction for ATEX/IECEx hazardous area cable glands
- Reduces 3/4 NPT conduit entry to 1/2 NPT for mismatched thread sizes
- ATEX/IECEx certified metal fitting for classified hazardous location compliance
- NDAA Section 889 compliant for federal procurement in industrial environments
Special Order · Usually Ships in 2-3 Weeks$43.50 $34.99 Save $8.51The item has been added -
Pelco
SKU: WBOVA2
Pelco WBOVA2 Wall Bracket Internal Cable Channel Gray
Gray wall mount bracket with internal cable routing for Pelco WBOV cameras
- Internal cable channel routes power and network cabling through bracket body
- Gray powder-coated steel construction rated IP66 with optional gasket kit
- Wall-mount design integrates with Pelco WBOV series camera systems
Special Order · Usually Ships in 2-3 Weeks$38.55 $30.99 Save $7.56The item has been added -
Pelco
SKU: BRKTMD-1011
Pelco BRKTMD-1011 L-Bracket Modular Microbullet
Right-angle L-bracket for Pelco modular microbullet corner and wall mounting
- Purpose-built for Pelco modular microbullet sensor heads only
- Perpendicular mounting geometry for corridor and confined-space surveillance
- NDAA Section 889 compliant for government and regulated installations
Special Order · Usually Ships in 2-3 Weeks$37.83 $30.99 Save $6.84The item has been added -
Pelco
SKU: SWM-PA-GY
Pelco SWM-PA-GY Pole Mount Adapter Gray
Pole mount adapter converts Pelco SWM-GY wall systems to pole installations
- Direct conversion from wall to pole mount without separate bracketing needed
- Gray finish matches Pelco hardware for consistent outdoor surveillance aesthetics
- NDAA Section 889 and TAA compliant for government and infrastructure deployments
Special Order · Usually Ships in 2-3 Weeks$37.84 $30.99 Save $6.85The item has been added -
Pelco
SKU: OCTEX1/2C
Pelco OCTEX1/2C ATEX IECEx Conduit Gland
1/2 NPT conduit gland with ATEX/IECEx certification for hazardous areas
- ATEX and IECEx certified to maintain explosion-proof ratings at cable entry
- 1/2 NPT thread entry for standard hazardous location conduit connections
- Integrates with Pelco camera systems in classified industrial environments
Special Order · Usually Ships in 2-3 Weeks$39.75 $31.99 Save $7.76The item has been added -
Pelco
SKU: OHOVPS2B
Pelco OHOVPS2B Power Supply 230V to 24V AC
230V to 24V AC converter for Pelco OHO surveillance housings
- Converts European 230 Vac mains to regulated 24 Vac output
- Compact mount-ready design fits OHO-series camera housings
- NDAA Section 889 compliant for government surveillance projects
Special Order · Usually Ships in 2-3 Weeks$35.48 $28.99 Save $6.49The item has been added -
Pelco
SKU: OHEPS20
Pelco OHEPS20 Housing Power Supply 230Vac to 24Vac
230Vac to 24Vac converter for Pelco outdoor camera housings
- Powers heater, blower, and wiper motor systems simultaneously
- 20% operational headroom matched to integrated housing accessories
- Indoor/enclosed installation in dry, ventilated location required
Special Order · Usually Ships in 2-3 Weeks$35.48 $28.99 Save $6.49The item has been added -
Pelco
SKU: VB-400-VF-MAG
Pelco VB-400-VF-MAG Magnetic Camera Mount
Magnetic close-fit mount for Pelco VB-400-VF fisheye camera
- Tool-free installation on ferrous metal surfaces, no drilling required
- Temporary, mobile, or semi-permanent deployment for rapid repositioning
- NDAA Section 889 compliant for government and regulated applications
Special Order · Usually Ships in 2-3 Weeks$35.00 $27.99 Save $7.01The item has been added -
Pelco
SKU: IJTV-AP
Pelco IJTV-AP Adapter Plate for IJV ITV Sarix Cameras
OEM adapter plate for Pelco IJV, ITV, and Sarix Value cameras
- Standardized mounting interface unifies three camera series in one deployment
- NDAA Section 889 compliant for government and regulated facility installations
- Reduces inventory complexity across mixed Pelco camera system rollouts
Special Order · Usually Ships in 2-3 Weeks$33.39 $26.99 Save $6.40The item has been added -
Pelco
SKU: BRKTMD-1021
Pelco BRKTMD-1021 Flat Bracket Right-Angle Sensor
Pelco right-angle sensor bracket for wall, ceiling, or conduit mounting
- Mounts Pelco right-angle sensor heads to walls, ceilings, or conduit ends
- Maintains correct angular offset positioning for optimal field of view
- Professional-grade construction, NDAA Section 889 compliant for regulated sites
Special Order · Usually Ships in 2-3 Weeks$33.19 $26.99 Save $6.20The item has been added -
Pelco
SKU: WBJQ2B_FLIR
Pelco WBJQ2B_FLIR WBJ Wall Mount FLIR Custom Color
Surface-mount wall bracket for Pelco thermal and dual-sensor cameras
- Vertical surface-mount design fits Pelco outdoor housings with WBJ interface
- FLIR custom color finish matches thermal camera equipment across mixed fleets
- Outdoor-rated construction for government, infrastructure, and enterprise deployments
Special Order · Usually Ships in 2-3 Weeks$35.00 $25.99 Save $9.01The item has been added -
Pelco
SKU: IMV-AP
Pelco IMV-AP Adapter Plate for Sarix Minidome
Adapter plate for Sarix minidome varifocal lens upgrades
- Precision-engineered mounting for IMV Series varifocal lenses
- IK09 vandal rating compatible with Sarix Value minidome systems
- Maintains optical alignment for consistent image sharpness across zoom
Special Order · Usually Ships in 2-3 Weeks$31.16 $24.99 Save $6.17The item has been added -
Pelco
SKU: BRKTMD-1031
Pelco BRKTMD-1031 Trimring Bracket Microbullet
Trimring bracket for Pelco microbullet sensor heads with field-serviceable design
- Mounts Pelco microbullet sensor heads to ceiling and wall surfaces with finished appearance
- Field-serviceable without removing sensor head, reducing installation and maintenance downtime
- Metal construction, NDAA Section 889 compliant for government and critical infrastructure projects
Special Order · Usually Ships in 2-3 Weeks$30.60 $24.99 Save $5.61The item has been added -
Pelco
SKU: WBOVQ2B_FLIR
Pelco WBOVQ2B_FLIR Wall Mount FLIR Custom Color
Wall mount for Pelco outdoor housings with FLIR custom color finish
- Surface-mount bracket sized for Pelco camera housings in outdoor environments
- FLIR custom color finish coordinates thermal and visible-light camera deployments
- PoE++ powered, NDAA Section 889 compliant for government installations
Special Order · Usually Ships in 2-3 Weeks$33.00 $24.99 Save $8.01The item has been added -
Pelco
SKU: SRXV2-ADPT-1001
Pelco SRXV2-ADPT-1001 Adapter Plate for Sarix Value 2
Mounting adapter plate for Pelco Sarix Value 2 dome cameras
- SRXV2-specific hole pattern aligns camera to ceiling cutouts and brackets
- OEM-quality construction supports secure mechanical retention on mount surfaces
- Bridges dimensional gaps between camera body and target mounting interface
Special Order · Usually Ships in 2-3 Weeks$30.00 $24.99 Save $5.01The item has been added -
Pelco
SKU: PWRCRD-R-US
Pelco PWRCRD-R-US Round US Power Cord
Round US power cord with NEMA 5-15 plug for dense rack installations
- 120 Vac rated with round jacket profile minimizes cable bulk in tight spaces
- NEMA 5-15 plug connects to standard outlets and UPS power distribution systems
- NDAA Section 889 compliant for government and regulated security deployments
Special Order · Usually Ships in 2-3 Weeks$28.94 $23.99 Save $4.95The item has been added -
Pelco
SKU: PWRCRD-S-US
Pelco PWRCRD-S-US Standard US Power Cord
Standard US power cord for Pelco surveillance systems, NEMA 5-15
- NEMA 5-15 connector rated for 120 Vac outlets and UPS outputs
- NDAA Section 889 compliant for government and regulated deployments
- Compatible with Pelco camera systems and surveillance appliances
Special Order · Usually Ships in 2-3 Weeks$28.94 $23.99 Save $4.95The item has been added
Pelco
PELCO PRODUCTS
Pelco has been engineering enterprise surveillance equipment since 1957 and remains a reference brand for critical infrastructure, transit, gaming, and large-format commercial installations. Pelco's Spectra PTZ platform and Sarix IP camera line set the standard for long-duty-cycle rugged surveillance, now backed by Motorola Solutions' global service network.
We stock the Spectra Enhanced 7 PTZ line, Sarix Professional and Enhanced IP fixed cameras, Sarix Multi Pro multi-sensor, VideoXpert VMS software and storage, plus legacy encoders for analog-to-IP migrations. Every Pelco product ships with Motorola Solutions' manufacturer warranty and access to Pelco's full commissioning and service network. Our engineers help with VideoXpert architecture sizing, PTZ patrol programming, and Sarix series specification for transit, casino, airport, and infrastructure buyers on 20+ year asset cycles.
No bots, just experts
Questions on Pelco? Free pre-sales support from a senior specialist — product questions, BOM quotes, compatibility checks, price confirmation — within one business day. Need full system design? $175/hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back.
