Lifesafety Power products
-
Save $383.01
Add to Cart The item has been addedLifesafety Power K1E4-Door-Boxed K1E4-Door-Boxed
Power supply unit designed to support door control and access management in security installations
- Operates at 24VDC to match standard electrified lock and reader voltage requirements.
- Centralizes door power distribution, reducing wiring complexity in multi-door deployments.
- Dedicated supply isolates door control power from the access panel for cleaner fault isolation.
Usually Ships in 2-3 Weeks Free shipping over $499$1,118.00 $734.99 Save $383.01 -
Save $0.01
Add to Cart The item has been addedLifesafety Power HINGE-STANDOFF-KIT Hinging Standoff Kit
Mounting accessory bundle designed to simplify camera installation on surfaces requiring both fixed and articulated standoff support
- Includes 4 hinging and 4 fixed standoffs, covering both adjustable and fixed mounts.
- All hardware is sized for 6-32 fasteners, matching common camera housings and brackets.
- Mixed standoff set reduces separate hardware orders during commissioning or servicing.
Usually Ships in 2-3 Weeks Free shipping over $499$33.00 $32.99 Save $0.01 -
Save $127.01
Add to Cart The item has been addedLifesafety Power FPV6-E1 FPV6-E1
Supervised power distribution module designed for access control and security system installations where supervised output circuits are required
- Supervised outputs detect open circuits, shorts, and power faults per zone.
- Designed for DIN rail or panel-mount integration in commercial security builds.
- Supports multi-zone power distribution for access control and alarm systems.
Usually Ships in 2-3 Weeks Free shipping over $499$372.00 $244.99 Save $127.01 -
Save $138.01
Add to Cart The item has been addedLifesafety Power FPV6-D8E1 6A 8 Auxillary Outputs
6-ampere regulated power supply designed to centralize backup power distribution across multi-device security installations
- 6A regulated output prevents voltage droop when camera resets and door strikes overlap.
- 8 independently supervised outputs let you isolate faults per device without system-wide impact.
- Battery backup integration enables graceful degradation so access control stays active during outages.
Usually Ships in 2-3 Weeks Free shipping over $499$403.00 $264.99 Save $138.01 -
Save $142.01
Add to Cart The item has been addedLifesafety Power FPV6-B100E1 4A/12V 4A/24V
Compact power distribution module designed for modest-scale IP security deployments where you need simultaneous 12VDC and 24VDC rails—common in
- Dual-rail 12 VDC and 24 VDC outputs at 4 A each eliminate a second power supply.
- 48 W on 12 V and 96 W on 24 V rails support cameras, readers, and door strikes.
- Compact wall-mount form factor suits single-door and small-system access deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$416.00 $273.99 Save $142.01 -
Save $139.01
Add to Cart The item has been addedLifesafety Power FPV4-B100E1 2A/12V 2A/24V
Compact 2-ampere power supply delivering selectable 12VDC or 24VDC output, purpose-built for small-to-medium IP security camera deployments and
- Switchable 12V/24V output eliminates stocking separate PSUs for mixed-voltage jobs.
- 2A per output supports 2–4 compact dome cameras on a single 12V branch.
- Compact form factor fits shallow wall-mount or DIN rail enclosures with constrained space.
Usually Ships in 2-3 Weeks Free shipping over $499$406.00 $266.99 Save $139.01 -
Save $188.01
Add to Cart The item has been addedLifesafety Power FPV104-R8E1 10A/24V 8 Lock Outputs
Regulated 24VDC power supply rated for 10A continuous output, designed to serve multiple electromagnetic lock circuits in access control and security
- Regulated 24VDC at 10A continuous output powers up to 8 electromagnetic lock circuits.
- Eight individual outputs consolidate mid-scale door control wiring into a single supply.
- Sized for 4–8 door deployments; calculate per-lock draw to stay within 10A total.
Usually Ships in 2-3 Weeks Free shipping over $499$549.00 $360.99 Save $188.01 -
Save $146.01
Add to Cart The item has been addedLifesafety Power FPV104-E1 10A/24V Ps/ Enclosure
10-ampere, 24-volt regulated power supply housed in a wall- or rack-mount enclosure
- Delivers regulated 24VDC at 10A to support mid-sized camera and reader arrays.
- Wall- or rack-mount enclosure centralizes DC distribution, eliminating per-device wall-warts.
- Terminal blocks accept 18–14 AWG copper wiring for standard low-voltage field connections.
Usually Ships in 2-3 Weeks Free shipping over $499$426.00 $279.99 Save $146.01 -
Save $156.01
Add to Cart The item has been addedLifesafety Power FPV104-D8E1 10A/24V 8 Auxillary Outputs
10-amp 24VDC regulated power supply with 8 separately supervised auxiliary outputs, designed for integrators deploying access control, intrusion
- 10A at 24VDC regulated output powers multiple readers, strikes, and sensors from one source.
- 8 independently supervised auxiliary outputs enable per-circuit fault detection and isolation.
- Cabinet-mount design centralizes distributed 24VDC power for access control and intrusion panels.
Usually Ships in 2-3 Weeks Free shipping over $499$456.00 $299.99 Save $156.01 -
Save $166.01
Add to Cart The item has been addedLifesafety Power FPV104-2D8E1 10A/24V 16 Auxillary Outputs
Regulated 24VDC power supply rated at 10 amps output, designed to feed multiple downstream security devices and control circuits in integrated access
- Regulated 24VDC at 10A powers up to 16 downstream devices from one source.
- 16 auxiliary outputs reduce panel footprint and simplify access control wiring.
- Supports cameras, electric strikes, mag locks, and relay modules on a 24V rail.
Usually Ships in 2-3 Weeks Free shipping over $499$486.00 $319.99 Save $166.01 -
Save $174.01
Add to Cart The item has been addedLifesafety Power FPV102-R8E1 10A/12V 8 Lock Outputs
12-volt regulated power supply rated for 10 amperes maximum output, configured with 8 independent relay lock outputs
- Centralized 12V/10A regulated supply drives up to 8 independent relay lock outputs.
- Eight onboard relay outputs eliminate discrete relay banks in access control cabinets.
- Cabinet-mount form factor suits mag locks, electric strikes, and REX device deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$508.00 $333.99 Save $174.01 -
Save $129.01
Add to Cart The item has been addedLifesafety Power FPV102-E1 10A/12V Ps/Enclosure
10-ampere, 12-volt power supply housed in a dedicated equipment enclosure
- Delivers 10A at 12VDC (120W) to power 4–6 IP cameras or mixed access control loads.
- Enclosed form factor shields power electronics from moisture and accidental contact.
- Centralizes 12VDC distribution from a single node, simplifying multi-device wiring.
Usually Ships in 2-3 Weeks Free shipping over $499$376.00 $246.99 Save $129.01 -
Save $138.01
Add to Cart The item has been addedLifesafety Power FPV102-D8E1 10A/12V 8 Auxillary Outputs
12VDC, 10-ampere power supply engineered to distribute power across multiple security devices in a single installation
- 12VDC at 10A total output powers up to 10 one-amp cameras from one supply.
- Eight isolated auxiliary outputs improve fault isolation—one tripped circuit won't drop others.
- Consolidates distributed 12V loads, eliminating separate transformers per device in the rack.
Usually Ships in 2-3 Weeks Free shipping over $499$403.00 $264.99 Save $138.01 -
Save $154.01
Add to Cart The item has been addedLifesafety Power FPV102-2D8E1 10A/12V 16 Auxillary Outputs
Compact 12VDC power distribution module rated at 10 amps continuous output, designed to supply and manage power to multi-camera surveillance systems
- 10A continuous at 12VDC supports 8–12 fixed cameras or mixed PTZ and relay loads.
- 16 auxiliary outputs allow independent fusing and fault isolation per downstream device.
- Centralized distribution eliminates stacked wall supplies, reducing wiring complexity.
Usually Ships in 2-3 Weeks Free shipping over $499$449.00 $294.99 Save $154.01 -
Save $243.01
Add to Cart The item has been addedLifesafety Power FPO75-E4S 75W Power Supply
Compact power supply board rated for 75W output, delivering either 6A at 12VDC or 3A at 24VDC
- Delivers 75W output at 6A/12VDC or 3A/24VDC from a single board SKU.
- Board form factor fits cabinet- or wall-mount enclosures where space is limited.
- Dual-voltage output eliminates separate SKUs for mixed 12V and 24V deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$710.00 $466.99 Save $243.01 -
Save $413.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PW1M 75W Single Voltage
75W single-voltage power supply rated for 120 VAC input, equipped with 8 auxiliary outputs
- 75W capacity powers up to 8 auxiliary outputs from a single centralized source.
- 120 VAC input integrates directly into standard circuits without additional conversion.
- Eight parallel ports eliminate daisy-chained adapters in camera and access control runs.
Usually Ships in 2-3 Weeks Free shipping over $499$1,206.00 $792.99 Save $413.01 -
Save $372.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PNLCE4M 75W Single Voltage 120 VAC
120VAC single-voltage power supply rated at 75W, designed to centralize power distribution for networked security devices in small to mid-scale
- 75W single-voltage output centralizes power for multiple low-current security loads.
- 120VAC input aligns with standard dedicated AC circuits, reducing distribution complexity.
- Single-voltage design cuts transformer overhead and lowers installation labor on uniform rails.
Usually Ships in 2-3 Weeks Free shipping over $499$1,084.00 $711.99 Save $372.01 -
Save $436.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE6M FPO75-D8PE6M
75-watt power supply and battery backup unit designed to maintain continuous operation of networked security devices during mains power loss
- 75W regulated DC output sustains cameras and access readers during mains failure.
- Multi-output terminal design allows modular power distribution across several endpoints.
- Compact form factor supports wall-mount or rack installation in network closets and IDF rooms.
Usually Ships in 2-3 Weeks Free shipping over $499$1,271.00 $834.99 Save $436.01 -
Save $315.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE4M1 Power supply board 75W 6A/12Vor 3
75W compact power distribution board designed to centralize and manage power delivery to networked IP cameras , access control readers, and allied
- Selectable 12VDC/6A or 24VDC/3A output matches most IP camera and reader requirements.
- Centralized 75W distribution eliminates individual wall transformers at each endpoint.
- Single-board hub simplifies troubleshooting across multi-door or multi-camera deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$919.00 $603.99 Save $315.01 -
Save $259.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE4H 75W Power Supply
75-watt power supply designed to distribute regulated voltage across access control, intercoms, and security endpoint infrastructure in mid-scale
- Dual-voltage output (12VDC/6A and 24VDC/3A) supports mixed-voltage endpoint deployments.
- Eight supervised auxiliary outputs enable centralized, monitored power distribution per channel.
- PTC polyswitch protection self-resets after overcurrent, eliminating fuse replacement on site visits.
Usually Ships in 2-3 Weeks Free shipping over $499$755.00 $495.99 Save $259.01