Sub categories

Showing Results for IP Cameras

Compare

Out of stock
ACTi

SKU: B65

ACTi B65 2MP Indoor Zoom Dome Camera
- 2MP resolution with 3x optical zoom enables identification-grade framing without repositioning.
- PoE 802.3af at ~12–13W runs data and power on a single cable, no separate PSU needed.
- ONVIF-compliant integration works with standard IP VMS platforms—no proprietary drivers required.
$901.00 $619.99 Save $281.01

Add to Cart
The item has been added
Free shipping over $499

$901.00 $619.99 Save $281.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B76A

ACTi B76A 12MP Outdoor Hemispheric Dome Camera
- 12MP 360°×180° hemispheric view eliminates blind spots and reduces total camera count.
- IP68/IK10/NEMA 4X ratings support washdown, submersion, and high-impact industrial sites.
- 130dB WDR and 0.003 lux color IR handle backlit and near-dark scenes on one PoE+ feed.
$2,354.00 $1,781.99 Save $572.01

Add to Cart
The item has been added
Free shipping over $499

$2,354.00 $1,781.99 Save $572.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B81

ACTi B81 5MP Outdoor Zoom Dome Camera
- 5MP at 2592×1944 with 3x optical zoom (3–9mm) covers wide and tight FOV from one mount.
- IP67/IK10/NEMA 4X-rated enclosure handles washdown, impact, and -40°C to 50°C operation.
- Single PoE+ (802.3at) RJ-45 delivers power and data; no separate injector or local power run.
$590.00 $445.99 Save $144.01

Add to Cart
The item has been added
Free shipping over $499

$590.00 $445.99 Save $144.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B83

ACTi B83 2MP Outdoor Zoom Dome Camera
- 3x optical zoom (3.0–9.0 mm) covers wide-area and forensic detail from one mount point.
- IP67/IK10-rated housing survives direct rain, dust ingress, and 5 kg vandal impact.
- 145 dB Extreme WDR and 0.003 lux IR sensitivity maintain usable footage in mixed lighting.
$590.00 $445.99 Save $144.01

Add to Cart
The item has been added
Free shipping over $499

$590.00 $445.99 Save $144.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B85

ACTi B85 2MP Outdoor Zoom Dome Camera
- 3x optical zoom (3.0–9mm) reframes 103.6° to 36.2° FOV without remounting.
- IP67/IK10 and NEMA 4X ratings handle rain, dust, and 20-joule vandal strikes.
- 0.003 lux sensitivity plus 850nm IR at 40m delivers usable night footage.
$590.00 $445.99 Save $144.01

Add to Cart
The item has been added
Free shipping over $499

$590.00 $445.99 Save $144.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B911

ACTi B911 3MP PTZ Camera with 10x Zoom Lens
- 10x optical zoom (4.7–47mm) covers 58° wide-angle to 5.8° detail from one mount point.
- IP67/IK10 and -40°C to 60°C rating supports harsh outdoor installs with no enclosure upgrade.
- PoE+ (802.3at) and full ONVIF Profile S/G/T/M simplify enterprise VMS integration.
$2,237.00 $1,693.99 Save $543.01

Add to Cart
The item has been added
Free shipping over $499

$2,237.00 $1,693.99 Save $543.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B912

ACTi B912 5MP Outdoor Mini PTZ Camera
- 5MP at 30fps with 10x optical zoom covers large perimeters without detail loss.
- PoE+ (802.3at) over single RJ-45 eliminates dedicated 12V power runs at install.
- IP67/IK10 and -40°C to 60°C rating supports harsh outdoor deployments year-round.
$2,207.00 $1,670.99 Save $536.01

Add to Cart
The item has been added
Free shipping over $499

$2,207.00 $1,670.99 Save $536.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B913

ACTi B913 5MP Indoor Speed Dome PTZ Camera
- 30x optical zoom (4.5–135mm) covers large indoor spaces without additional fixed cameras.
- Single PoE+ (802.3at) RJ-45 pigtail eliminates separate power runs; verify switch budget.
- 5MP sensor with 120dB WDR maintains detail in backlit lobbies and high-contrast corridors.
$4,236.00 $3,206.99 Save $1,029.01

Add to Cart
The item has been added
Free shipping over $499

$4,236.00 $3,206.99 Save $1,029.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B915-K1

ACTi B915-K1 3MP Video Analytics Outdoor Speed Dome
- 36x optical zoom (4.6–165.6mm) tracks subjects at distance across wide perimeters.
- IP66/IK10-rated metal housing with 145dB WDR handles harsh outdoor and mixed-light sites.
- ONVIF Profile S/G/T/M plus VISCA/Pelco-D/P integrates with legacy and modern VMS platforms.
$3,249.00 $2,683.99 Save $565.01

Add to Cart
The item has been added
Free shipping over $499

$3,249.00 $2,683.99 Save $565.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B916

ACTi B916 2MP Outdoor Speed Dome PTZ Camera
- 20x optical zoom (4.7–94mm) with 256 presets covers wide areas and captures plate-level detail.
- IP67/IK10-rated housing withstands full dust ingress, submersion, and vandal impact outdoors.
- 145dB WDR and 0.002 lux minimum illumination maintain image quality in extreme lighting conditions.
$4,228.00 $3,199.99 Save $1,028.01

Add to Cart
The item has been added
Free shipping over $499

$4,228.00 $3,199.99 Save $1,028.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B923

ACTi B923 3MP Video Analytics Indoor Speed Dome
- 30x optical zoom (4.5–135 mm) covers large indoor areas from a single PTZ mount.
- 3MP sensor with 0.003 lux color sensitivity sustains detail in near-dark environments.
- PoE+ (802.3at) power and H.265 compression simplify cabling and reduce storage overhead.
$3,521.00 $2,663.99 Save $857.01

Add to Cart
The item has been added
Free shipping over $499

$3,521.00 $2,663.99 Save $857.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B928

ACTi B928 5MP Outdoor Speed Dome PTZ Camera
- 5MP at 36x optical zoom (4.6–165.6mm) delivers identification-quality detail at distance.
- IP66/IK10 housing with −40°C to 55°C range supports arctic, desert, and impact-prone sites.
- 850nm IR to 200m and 120dB WDR eliminate external lighting in zero-lux or backlit scenes.
$5,974.00 $4,521.99 Save $1,452.01

Add to Cart
The item has been added
Free shipping over $499

$5,974.00 $4,521.99 Save $1,452.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: B934

ACTi B934 2MP Indoor Speed Dome PTZ Camera
- 30x optical zoom (4.5–135 mm) with 256 presets covers multi-zone spaces from one mount.
- 145 dB WDR and 0.002 lux color sensitivity maintain detail in high-contrast, low-light scenes.
- PoE+ (802.3at) and ONVIF compliance simplify single-cable deployment into existing VMS platforms.
$3,756.00 $2,842.99 Save $913.01

Add to Cart
The item has been added
Free shipping over $499

$3,756.00 $2,842.99 Save $913.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: EPR8A88555-MS

ACTi Balancebox Mobile Stand MIX + 400-70 W/ - EPR8A88555-MS
- Integrated 70W supply eliminates a separate AC adapter, reducing cable clutter.
- No permanent mounting required—reposition between sites without rewiring infrastructure.
- Operates up to 40°C (104°F); verify ambient temps on sustained high-heat deployments.
$2,779.00 $1,605.99 Save $1,173.01

Add to Cart
The item has been added
Free shipping over $499

$2,779.00 $1,605.99 Save $1,173.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: C11W

ACTi C11W 3MP Outdoor Mini PTZ Camera
- 1280×1024 resolution with 75 dB WDR keeps detail in mixed-light indoor scenes.
- PoE+ (802.3at) and Wi-Fi 802.11b/g/n support wired or wireless deployment flex.
- On-camera analytics—people counting, face detection, tamper—run without external servers.
$363.00 $275.99 Save $87.01

Add to Cart
The item has been added
Free shipping over $499

$363.00 $275.99 Save $87.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: CAM-4MP

ACTi CAM-4MP 4MP Day/Night Vandal Zoom Bullet Camera
- 5x optical zoom (2.7–13.5 mm, F1.6) delivers plate and facial detail from a fixed mount.
- IP68, IK10, and NEMA 4X ratings handle full water immersion and direct physical assault.
- PoE+ (802.3at) powers the unit over a single RJ-45 run; no local power supply required.
$500.00 $304.99 Save $195.01

Add to Cart
The item has been added
Free shipping over $499

$500.00 $304.99 Save $195.01

Add to quote Compare

IP Cameras

IP cameras are the foundation of modern commercial surveillance systems. Select by camera type, environment, and performance requirements to match your coverage objectives.

Plan Your Deployment

Pixel density for identification zones
Low-light and IR performance
Frame rate and shutter tuning
Nighttime bitrate impact on retention
PoE power requirements

Camera Selection Guide Retention Planning PoE Planning

What to Look For When Buying

The six decisions that matter most before you spec.

Form Factor by Scene

Bullet cameras signal deterrence and reach long distances; domes blend into architecture and resist tampering; turrets split the difference with clean IR without dome-ball reflection. Panoramic 360° replaces 3-4 fixed cameras in open interiors. Match form factor to scene geometry, not aesthetic preference. See our coverage engineering guide for scene-planning methodology.

Pixel Density Over Megapixels

A 4K camera set 80 feet back delivers worse identification imagery than a 2MP camera at 30 feet. PPF (pixels per foot) on the target — not raw resolution — is what determines recognition vs. identification grade coverage. Our DORI pixel density guide covers the math for every common scene.

NDAA Section 889 Compliance

Federal, state, and critical-infrastructure procurement excludes Hikvision, Dahua, and their OEM-rebranded subsidiaries. Axis, Hanwha Vision, i-PRO, Pelco, Digital Watchdog, Vivotek, and Bosch are all NDAA-compliant. Specify compliance in RFPs — it cannot be retrofitted into a deployment after-the-fact.

Edge AI & Analytics

Modern IP cameras run object classification, line-crossing detection, loitering, and people counting on the camera itself — filtering false alarms before they reach the NVR. Axis Object Analytics, Hanwha Wisenet 7 AI, i-PRO Scene Analytics, and Hikvision AcuSense all run on-camera. Proper scene setup matters as much as the algorithm.

PoE Power Budget

Peak draw for outdoor cameras with heaters + IR can hit 25W+; PTZ models can demand 60-90W (PoE++). A 24-port switch with 370W total budget can't actually run 24 PTZs. Plan switch power for simultaneous peak — see PoE budget planning and why your PoE switch fails after 18 cameras.

Storage & Retention Math

H.265 cuts bitrate 40-50% versus H.264 at equivalent quality; smart codecs drop further during static scenes. 30-day retention on 4K across 32 cameras is very different math than 30-day on 2MP H.265. Use our retention math guide before sizing your NVR or storage array.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

ONVIF Profile S + G + T

Industry standard for IP camera interoperability. Profile S = live streaming, G = recording/playback, T = advanced streaming (H.265 + analytics metadata). Certified conformance — not vague "ONVIF compatible" language — is what guarantees cross-VMS interoperability. Check spec sheets for profile-level certification.

DORI Classification

IEC 62676-4 defines four detection distances: Detect (25 PPF), Observe (63 PPF), Recognize (125 PPF), Identify (250 PPF). Most forensic-grade IP camera deployments need Recognize or Identify at the scene's farthest point — which drives lens selection and mounting distance calculations.

H.265 + Smart Compression

Modern codec with 40-50% lower bitrate than H.264 at equivalent perceived quality. Smart Stream / Zipstream / WiseStream variants drop bitrate further by identifying static scene regions. Matters most for multi-month retention at scale — storage savings compound.

Wide Dynamic Range (WDR)

Scene lighting ratio handled simultaneously. Entry-level 120dB, premium 150dB. Matters most at doorways, loading docks, and glass-heavy entries where interior shadow meets exterior sunlight. Hanwha Wisenet 7 and Axis Forensic WDR flagship at 150dB+.

PoE+ / PoE++ (802.3at / 802.3bt)

802.3at delivers 25.5W/port — sufficient for most outdoor cameras with heater + IR. 802.3bt (Type 3 = 60W, Type 4 = 90W) powers PTZs, multi-sensor, and heated-housing cameras. See PoE injectors for single-port solutions.

Edge Storage + Failover

SD card slots on modern IP cameras provide local failover recording when network or NVR drops. Not a primary-storage solution — but essential for high-availability deployments. Industrial-grade SD cards (not consumer) required; typical 256GB to 1TB.

Typical Deployment Scenarios

Multi-Site Retail Chain

Mixed deployment: 180° panoramic at POS/entry, bullet cameras at back-of-house and dock, domes at stockroom and offices. Centralized VMS with per-site NVR or cloud hybrid. Analytics for people-counting and dwell-time. Typical 12-24 cameras per site, 30-60 day retention.

Corporate Campus

Outdoor bullets + PTZs at perimeter and parking structures; indoor domes at main lobbies, elevator banks, server rooms, and loading bays; multi-sensor at atriums. Integration with access control for door-forced-open and tailgating event overlays.

Industrial & Warehouse

Long-range bullets at loading docks and fence-line, thermal at fuel-storage perimeter, panoramic cameras in high-bay for wide-coverage single-camera monitoring. Heavy use of on-camera analytics for forklift-zone intrusion detection. See warehouse surveillance.

Municipal & Critical Infrastructure

NDAA-mandatory deployments: Axis, Hanwha, i-PRO only. Thermal + visible dual-sensor at perimeter; PTZ with radar-slewing at large-area monitoring; LPR at ingress/egress points. FIPS 140-2 encryption, TLS 1.3 streaming, integration with emergency communications.

Frequently Asked Questions

What's the difference between an IP camera and an analog camera?

IP cameras connect over Ethernet, deliver native-digital HD/4K resolution, run on-camera analytics, and integrate with software-based VMS platforms. Analog cameras use coax and require encoder/DVR hardware to reach network resolution beyond 1080p. For new deployments, IP is the standard — analog exists only for retrofit use cases where coax already runs.

Which IP camera brands are NDAA compliant?

Axis, Hanwha Vision, i-PRO, Pelco, Digital Watchdog, Vivotek, and Bosch are all NDAA-compliant. Hikvision and Dahua are restricted under Section 889 for federal, state government, and critical-infrastructure procurement but remain available for commercial deployments.

How do I choose the right resolution for an IP camera?

Start with the farthest point of the scene you need to identify. Calculate required PPF (pixels-per-foot) on that target: 125 PPF for recognition, 250 PPF for identification. Work backward from PPF and sensor size to resolution and lens focal length. A 2MP camera with the right lens often outperforms a 4K camera with the wrong one — see our DORI guide.

What PoE standard do modern IP cameras require?

Fixed indoor cameras run on standard 802.3af PoE (15.4W). Outdoor cameras with heaters and IR need PoE+ (802.3at, 25.5W). PTZ, multi-sensor, and heated-housing cameras need PoE++ (802.3bt, 60-90W). Plan switch power budget for simultaneous-peak load, not nameplate ratings — see why PoE switches fail at scale.

Can I mix IP camera brands in one VMS?

Yes — any ONVIF Profile S + G certified cameras work with any certified VMS. Milestone XProtect, Genetec Security Center, Avigilon ACC, and Exacq routinely mix Axis, Hanwha, i-PRO, and Hikvision cameras on one server. Note: vendor-specific analytics metadata (Axis Object Analytics, Hanwha AI, etc.) may require that vendor's VMS or a VMS with explicit integration.

How many cameras can a typical NVR support?

Channel count is only one dimension — total bitrate is the real constraint. A 32-channel NVR rated for 320 Mbps can't run 32 4K cameras at 8 Mbps each (that's 256 Mbps, leaving almost no headroom). For high-resolution deployments, size by aggregate bitrate first, channel count second. See retention math for sizing methodology and our NVR catalog.

Sub categories

Showing Results for IP Cameras

IP Cameras

Plan Your Deployment

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading