Switch Modules
Showing Results for Switch Modules
-
Ubiquiti
SKU: UF-GP-C+
Ubiquiti UF-GP-C+ SFP Module
SFP+ single-mode fiber module for UniFi & UISP long-range links
- Hot-swappable SFP+ form factor allows live insertion without shutting down the host switch.
- Single-mode fiber support eliminates the 100 m copper ceiling for campus backbone links.
- Draws power directly from the SFP+ host slot — no external PSU or additional rack space needed.
$108.75 $82.99 Save $25.76The item has been added -
Valcom
SKU: V-WMCA
Valcom V-WMCA Wireless Master Clock Transceiver
Wireless master clock transceiver with browser-based setup
- Browser-based setup and admin, no proprietary management software
- Wireless master clock for synchronized analog clock retrofits
- 8.9 lb wall-mount master clock transceiver made in the United States
$4,477.00 $2,376.99 Save $2,100.01The item has been added -
Veracity
SKU: VLS-1N-LC
Veracity VLS-1N-LC HIGHWIRE Longstar LITE Transceiver
- HIGHWIRE Longstar LITE single-channel fibre transceiver
- LC fiber connector for standard cable plant integration
- Point-to-point HIGHWIRE camera fiber transmission
$277.12 $199.99 Save $77.13The item has been added -
Add to Cart The item has been addedVeracity
SKU: VLS-1U
Veracity VLS-1U LONGSPAN PoE Extender SFP Module Switch
24-port SFP switch extends PoE across fiber for remote cameras
- 24 hot-swappable SFP slots support single-mode fiber runs beyond 20 km.
- Regenerates 802.3at+ PoE at the fiber terminus, powering cameras and readers remotely.
- 1U rackmount chassis consolidates fiber termination, switching, and power injection.
$93.56 $82.99 Save $10.57The item has been added -
Vivotek
SKU: AW-GEL-105A-110
Vivotek AW-GEL-105A-110 8-Port Gigabit PoE High Power + 1-Port SFP Lite 110 W Managed Switch
8-port Gigabit PoE switch with 110W budget for IP surveillance
- Two 90W high-power ports plus six 30W ports for mixed camera loads
- 20 Gbps switching bandwidth with managed VLAN, QoS, and STP support
- 4KV surge protection per port; 1x SFP uplink for fiber connectivity
$300.00 $208.99 Save $91.01The item has been added -
Vivotek
SKU: AW-GEL-285A-380
Vivotek AW-GEL-285A-380 24-Port Gigabit PoE High Power + 2-Port SFP Lite 380W Managed Switch
24-port PoE switch with 380W budget for surveillance and access control
- 4 ports at 90W + 20 ports at 30W for high-demand cameras and access points
- 56 Gbps switching bandwidth with 4,096 VLAN IDs and QoS traffic management
- Per-port PoE control, auto-checking, 4kV surge protection, and extended 250M mode
$800.00 $556.99 Save $243.01The item has been added -
Vivotek
SKU: SFP-1000-CPTX-X1
Vivotek SFP-1000-CPTX-X1 Gigabit SFP to RJ45 Converter
Gigabit SFP-to-RJ45 converter for fiber-to-copper network bridging
- 1.25 Gbps 1000BASE-T over Cat.5e/Cat.6 cable up to 100 meters
- Auto-negotiation and Auto-MDI/MDI-X support for plug-and-play setup
- Compact 68.3 x 13.7 x 13.8 mm form factor rated 0°C to 70°C
$119.00 $82.99 Save $36.01The item has been added -
Vivotek
SKU: SFP-1000-SM13-10I
Vivotek SFP-1000-SM13-10I Industrial Gigabit SFP Module
1.25G singlemode SFP for 10km industrial fiber runs, -40°C to 85°C
- 1.25 Gbps data rate over 9/125μm singlemode fiber up to 10 kilometers
- Operates reliably -40°C to 85°C for outdoor and harsh industrial sites
- LC singlemode connector with 1310nm wavelength, MSA compliant module
$73.00 $50.99 Save $22.01The item has been added -
Vivotek
SKU: SFP-1000-SM13-40
Vivotek SFP-1000-SM13-40 40KM Gigabit SFP Module
40km singlemode SFP for long-range gigabit fiber networks
- 1.25 Gbps gigabit ethernet over 9/125μm singlemode fiber to 40km
- 1310nm wavelength with LC connector for standard network equipment
- Operates 0°C to 70°C; MSA compliant for broad device compatibility
$86.00 $59.99 Save $26.01The item has been added -
Vivotek
SKU: SFP-1000-SM13-40I
Vivotek SFP-1000-SM13-40I Industrial 40KM SFP Transceiver
40km singlemode SFP for long-distance fiber surveillance networks
- 1.25 Gbps Gigabit data rate over 9/125μm singlemode fiber to 40km
- Industrial-grade operation from -40°C to 85°C in outdoor deployments
- LC connector, 1310nm wavelength, MSA compliant for broad compatibility
$91.00 $63.99 Save $27.01The item has been added -
Vivotek
SKU: SFP-1000-MM13-02
Vivotek SFP-1000MM13X2 Gigabit Multimode SFP Module
1.25 Gbps multimode SFP for surveillance networks up to 2km
- 1.25 Gbps Gigabit data rate with 1300/1310 nm wavelength for HD video
- Reaches 2 kilometers over 50/125µm and 62.5/125µm multimode fiber
- LC connectors, MSA compliant, operates 0°C to 70°C
$55.00 $37.99 Save $17.01The item has been added -
Vivotek
SKU: SFP-1000-MM13-02I
Vivotek SFP-1000MM13X2I Industrial Gigabit SFP Module
Industrial multimode SFP for gigabit links up to 2km in extreme temps
- 1.25 Gbps data rate on multimode fiber (50/125µm, 62.5/125µm)
- Operates reliably from -40°C to 85°C in harsh industrial environments
- LC connector with 2km transmission range for distributed deployments
$73.00 $50.99 Save $22.01The item has been added -
Vivotek
SKU: SFP-1000-MM85-X5
Vivotek SFP-1000MM85X5 Gigabit Multimode SFP Module
1.25 Gbps multimode SFP for fiber surveillance networks up to 500m
- 850 nm VCSEL laser with 1.25 Gbps data rate over multimode LC fiber
- Reaches 500 meters on 50/125µm or 62.5/125µm multimode cable types
- MSA-compliant, hot-pluggable module with 0°C to 70°C operating range
$50.00 $34.99 Save $15.01The item has been added -
Vivotek
SKU: SFP-1000-MM85-X5I
Vivotek SFP-1000MM85X5I Gigabit Multimode SFP Module
1.25 Gbps multimode SFP for -40°C to 85°C industrial networks
- 1.25 Gbps data rate with 850 nm VCSEL over multimode fiber to 0.5 km
- Operates reliably across -40°C to 85°C, rated for harsh humidity (5–90%)
- LC connector, MSA compliant, plug-and-play installation with no config needed
$60.00 $41.99 Save $18.01The item has been added -
Vivotek
SKU: SFP-1000-SM13-10
Vivotek SFP-1000SM13X10 1G Single Mode SFP Transceiver
1.25 Gbps single-mode SFP for surveillance networks up to 10 km
- 1310 nm wavelength reaches 10 km on 9/125μm single-mode fiber
- LC duplex connectors with Fabry-Perot laser for stable long-distance links
- 3.3V low-power operation; MSA-compliant for broad equipment compatibility
$55.00 $37.99 Save $17.01The item has been added -
Vivotek
SKU: SFP-2000-MM85-X3
Vivotek SFP-2000-MM85-X3 10G Multimode SFP Module
10G multimode SFP+ module for short-range fiber links up to 300m
- 10 Gigabit Ethernet over 50/125μm multimode fiber with LC connector
- 850nm VCSEL laser with -1 to -9.9 dBm Rx sensitivity, 3.3V operation
- MSA-compliant, hot-swappable design; operates 0°C to 70°C
$144.00 $99.99 Save $44.01The item has been added
Switch Modules
Switch modules expand network switch capability by adding uplink options, fiber connectivity, and modular expansion ports. Select compatible SFP transceivers and switch modules to match your switch hardware, fiber type, and distance requirements.
Plan Your Deployment
- Switch model compatibility and supported module types
- Fiber type selection (single-mode vs multi-mode)
- Distance requirements and transceiver range
- Uplink speed requirements (1G, 10G, etc.)
- Network design and redundancy planning
Switch Modules — Engineering-Grade Network Infrastructure for Commercial Deployments
This category covers 196 working models of switch modules sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Port count and PoE budget come first. An 8-camera install needs at least 9 ports (cameras + uplink), with PoE budget covering the sum of per-camera PoE class. Account for uplink speed: 1 Gbps uplinks bottleneck under heavy video load on switches with 8+ high-resolution cameras. SFP+ or 10 Gbps uplinks remove that bottleneck on growing sites.
Managed versus unmanaged switches affect troubleshooting and VLAN segmentation. Managed switches (HPE Aruba, Cisco, Netgear ProSAFE M-series) support VLANs, link-aggregation, port mirroring, and SNMP monitoring — essential for any deployment over 16 cameras or with mixed traffic. Unmanaged switches work for small isolated camera networks but limit growth and troubleshooting visibility.
Layer 3 capability (routing, VLAN inter-VLAN routing) becomes important when surveillance, access control, and corporate traffic share the same physical network. Surveillance VLAN isolation is now standard practice — segregate camera traffic from corporate Wi-Fi and guest networks to prevent broadcast storms and lateral attack paths. Confirm the switch supports the VLAN count and ACL complexity you need.
Outdoor/industrial deployments need ruggedized switches. ComNet, Antaira, and Moxa make hardened switches rated for -40°C to +75°C, vibration, and waterproof housings. DIN-rail mounting fits standard outdoor enclosures. Standard data-closet switches in outdoor enclosures fail within 1-2 years from condensation and temperature swings; spec the right environment rating up front.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Connectivity | Wired |
| Type | Switch, Accessory, Media Converter, Power Supply, 4x T1/E1 ION Module, PoE Injector, 6 Slot AC ION Chassis, 19-Slot AC ION Chassis |
Top Brands in This Category
Frequently Asked Questions
What's the difference between managed and unmanaged PoE switches?
Unmanaged switches power-on and forward traffic without configuration — simplest deployment but no VLAN, no monitoring, no troubleshooting visibility. Managed switches add VLANs, link-aggregation, port mirroring, SNMP, and remote-management interfaces. For deployments above 16 cameras or those sharing infrastructure with other systems, managed is the right choice; the per-port cost is modest and the operational benefit is large.
How much PoE budget should I size for?
Sum the PoE-class budget of all PoE-powered devices, then add 20-30% headroom for growth. Eight 802.3at cameras at 30W max each is 240W minimum — but a 130W-budget 8-port PoE+ switch can't deliver that. Confirm both per-port budget and total PoE budget; many entry-level switches advertise PoE+ ports but cap aggregate budget at half the per-port maximum.
Do I need 10 Gbps uplinks?
For installations under 32 cameras with mid-resolution streams, 1 Gbps uplinks suffice. Above that, or when you need fast investigative playback for many simultaneous reviewers, 10 Gbps (SFP+) uplinks remove the choke point. NVRs writing to NAS over the network also benefit. SFP+ has become reasonably affordable on managed switches; opt for it on new installs over 16 cameras.
Can I run VoIP and video on the same switch?
Yes — modern managed switches use VLAN segregation to keep VoIP, video, and data traffic separated even on shared physical ports. Use QoS (Quality of Service) to prioritize VoIP for low latency and assign video its own queue. Avoid mixing untagged traffic types on a single switch port without VLAN configuration; broadcast storms and bandwidth competition cause both voice and video quality issues.
What's the right uplink between buildings on a campus?
Single-mode fiber for runs over 100 m, multi-mode for shorter runs (typically up to 550 m on OM3, 300 m on OM4 at 10 Gbps). Bidirectional SFPs (single fiber instead of pair) save fiber count when the run is already deployed. Avoid copper between buildings — ground-potential differences during lightning strikes destroy switch SFP modules even when surge-protected.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.