Digital Watchdog

SKU: DW-DX1VSTK24

Digital Watchdog DW-DX1VSTK24 Network Switch Kit

• 45-port 10G switch kit for large camera-network deployments
• Intel i7 with 16-32GB memory supports VLAN segmentation
• 5-year limited warranty backs enterprise surveillance projects

Digital Watchdog

SKU: DW-DX1VSTK48

Digital Watchdog DW-DX1VSTK48 Network Switch Kit

• Network switch kit for surveillance camera aggregation
• 45 ports at 10G speed with managed VLAN and QoS support
• Intel i7 with 16-32GB memory for sustained switching

Digital Watchdog

SKU: DW-POEEX2

Digital Watchdog DW-POEEX2 PoE Extender

• PoE extender doubles cable distance beyond 100m Ethernet limit
• Powers remote IP cameras without local outlet at install site
• Pass-through PoE keeps single-source power simple to budget

Digital Watchdog

SKU: DW-VA1P162T

Digital Watchdog DW-VA1P162T VMAX A1 Plus Network Switch

• VMAX A1 Plus network switch for surveillance backbones
• 45 ports at 10G with Intel i7 + 16-32GB memory
• 5-year limited warranty for sustained enterprise deployment

Digital Watchdog

SKU: DW-VP169T16P

Digital Watchdog DW-VP169T16P 9TB Security Switch

• 9TB onboard storage for extended surveillance video retention
• 45-port 10G architecture for large-scale camera aggregation
• Intel i7 processing with 16GB memory for managed switching

Digital Watchdog

SKU: DWC-PZADP

Digital Watchdog DWC-PZADP Tilting Adapter Ivory

Aluminum tilting adapter for DWC-PZARAM and multi-sensor cameras

• Up to 30-degree tilting range for precise camera angle adjustment
• Durable aluminum alloy construction with ivory spray finish coating
• Compatible with DWC-PZARAM and multi-sensor camera models

Digital Watchdog

SKU: DWC-PZADPW

Digital Watchdog DWC-PZADPW Tilting Adapter White

Mechanical tilting adapter with 30° range for precise camera angle adjustment

• 30-degree vertical tilt range fine-tunes coverage without full camera repositioning
• Aluminum alloy construction resists corrosion with lightweight installation on standard mounts
• White spray finish blends into light-colored walls and ceilings for discrete mounting

Digital Watchdog

SKU: DWC-V7DECO

Digital Watchdog DWC-V7DECO Decorative Rings 5-Pack

Decorative rings for V7 dome cameras—tool-free snap-fit customization

• 5-pack of durable plastic rings rated for indoor and outdoor use
• Tool-free snap-fit installation—swap aesthetics in seconds without removal
• Zero impact on camera performance, optics, or IR illumination

DMP

SKU: 1107

DMP 1107 Micro Window Transmitter

• Micro form factor fits narrow window frames where standard magnetic contacts cannot mount.
• 345 MHz wireless operation eliminates home-run wiring to perimeter windows and glass doors.
• Supervised DMP 1100 Series protocol alerts the XR panel on signal loss or tamper events.

DMP

SKU: 1108

DMP 1108 Doorbell Module

Multi-door intercom module supporting up to 8 doors with wireless and wired

• Consolidates up to 8 door inputs into one wireless transmitter, cutting hardware count.
• 900 MHz FCC Part 15-certified radio eliminates dedicated annunciation cable runs.
• Accepts mechanical pushbutton and video doorbell inputs with no signal conditioning needed.

DMP

SKU: 1112

DMP 1112 Water and Temperature Detector

Wireless water and temperature detector for mechanical rooms and data centers

• Detects water contact within 60 seconds and flags temperature excursions beyond 45–95°F.
• Wireless DMP protocol eliminates conduit runs—retrofits into existing DMP receiver infrastructure.
• Battery-powered via two CR2450 cells; compact 1.25×1.25×1.0 in form factor at 0.03 lbs.

DMP

SKU: 1136

DMP 1136 Wireless Remote Chime

Wireless chime for access control with audio-visual alerts, no hardwired sounder lines

• Wireless operation eliminates dedicated audio cable runs to doors, docks, and remote zones.
• Keypad-based sounder triggers on door events or credential reads with per-zone event mapping.
• Compact 2.6" W × 5" H × 1.5" D form factor fits standard access control mounting locations.

DMP

SKU: 1139

DMP 1139 Wireless Bill Trap

Wireless bill trap for panic-holdup systems without hardwired installation

• Wireless transmission eliminates hardwired loops to teller windows and service counters.
• Includes two CR2450 coin cell batteries, enabling deployment without external power runs.
• Compact bracket (2.5" L × 1.3" W) supports discreet mounting in transaction zone retrofits.

DMP

SKU: 1142-GUARD

DMP 1142-GUARD Under-Desk Hold-Up Transmitter Guard

Concealed under-desk mount for DMP wireless panic-holdup transmitters

• Purpose-built guard ensures mechanical fit with DMP wireless panic-holdup transmitters.
• Under-desk concealed mount prevents tampering and accidental activation in high-traffic areas.
• Ergonomic guard design allows authorized staff rapid two-button activation during incidents.

DMP

SKU: 1148-G

DMP 1148-G Personal Pendant Wireless Panic Button

Wireless pendant for panic and holdup alerts in commercial facilities

• Wearable panic button transmits wireless emergency alerts without reaching a hardwired device.
• Status LED confirms signal transmission to the receiver, enabling rapid deployment verification.
• Pre-installed non-removable battery eliminates ongoing maintenance; water-resistant for typical indoor use.

DMP

SKU: 1154

DMP 1154 Wireless Four-Zone Input Module

Four wireless zones for door/window monitoring with HID and NFC support

• Four independent wireless zones accept legacy door/window contacts with no new conduit runs.
• Supports HID and NFC/13.56MHz credentials, reducing reader hardware across distributed sites.
• 12VDC operation allows CR123A battery or PS12-5 supply for flexible permanent or temp installs.