Speco Technologies N8WA4P12TB vs Vivotek ND9326P: Specification Comparison
The Speco N8WA4P12TB and Vivotek ND9326P are both 8-channel H.265 NVRs with PoE camera power, targeting small-to-midsize IP surveillance deployments. The comparison is meaningful at the channel-count level, though the products diverge sharply in scope: the Speco unit bundles a 4-door physical access control subsystem and 12 TB of pre-installed storage, while the Vivotek focuses on pure video with 4K decode capability, RAID-ready dual HDD bays, richer analytics, and more granular network and playback features. Buyers choosing between them are effectively weighing a converged security appliance against a dedicated, feature-dense NVR.
In This Guide
- How does storage capacity and recording capability compare between the two units?
- Which unit offers broader functional scope—pure NVR versus converged access control?
- How do the two units differ in network connectivity, PoE power delivery, and operating environment specs?
- Which should you choose: the N8WA4P12TB or the ND9326P?
- Side-by-Side Specs
- FAQ
How does storage capacity and recording capability compare between the two units?
The N8WA4P12TB ships with 12 TB of internal storage pre-installed, eliminating the need to source or seat drives at commissioning. Speco specifies a storage range of 1 TB–14 TB and records at up to 8 MP / 30 fps using H.265 compression. No recording throughput figure in Mbps is provided in the Speco spec sheet.
The ND9326P ships with no internal storage included ('HDD purchased separately') and accepts two 3.5-inch drives, supporting RAID 0 or RAID 1 for redundancy or capacity pooling. Vivotek specifies a recording throughput of 192 Mbps and a decoding capability of H.265/H.264 at 3840×2160 @ 120 fps or 1920×1080 @ 480 fps, with hardware decoding up to 7680×2560 for playback. Frame rate is listed as 60 fps. Backup paths include USB 3.0 external storage and scheduled FTP.
The Speco unit offers immediate, zero-procurement storage; the Vivotek gives integrators flexibility in drive choice and the option of RAID protection, but requires additional hardware cost and installation steps.
Which unit offers broader functional scope—pure NVR versus converged access control?
The N8WA4P12TB is explicitly a converged appliance: it pairs an 8-channel NVR with a 4-door access control controller and an integrated lock power supply. Speco lists video-and-access event timeline correlation, meaning door events and camera footage are linked in a single interface. Deep Learning (DLPU) analytics include People Counting. The unit also provides two-way audio and records up to 8 MP at 30 fps over H.265. Camera input is described as TVI or IP plus 2 additional IP channels.
The ND9326P is a dedicated NVR with no access control functionality. Its analytics footprint is broader on the video side: object search (people, vehicle), scene search (line crossing, intrusion, loitering), attribute search (gender, age, clothing color, vehicle type/color), VCA Counting, Smart Search II, and Trend Micro IoT Security integration. It supports ONVIF Profile S, PTZ control (direction, preset, patrol), fisheye dewarp (1O/1P/1R modes), and 4 alarm inputs plus 1 alarm output. Live-view layouts support 8 channels; playback displays 4 channels simultaneously.
Buyers requiring door access management from a single appliance will find no equivalent functionality in the ND9326P. Buyers needing deep video analytics, ONVIF interoperability, or fisheye dewarp will find the ND9326P significantly richer.
How do the two units differ in network connectivity, PoE power delivery, and operating environment specs?
Speco specifies PoE per IEEE 802.3af for camera power. No dual-NIC, total PoE budget, operating temperature range, or humidity spec is provided in the supplied data sheet for the N8WA4P12TB.
The ND9326P provides dual 10/100/1000 Mbps Ethernet (RJ-45 × 2) with a combined network throughput of 224 Mbps. It is rated for PoE+ (which exceeds 802.3af) and Vivotek lists PoE Management as supported. Power consumption is listed at a maximum of 190 W. Operating temperature is specified as −10 °C to 55 °C (14 °F to 131 °F) with 0–95% humidity. Safety certifications include CE, FCC, VCCI, C-Tick, UL, CB, BSMI, and BIS. Video outputs are HDMI × 1 and VGA × 1, with display resolution up to 3840×2160.
The ND9326P's dual-gigabit NICs support network segmentation between camera and management VLANs—a common enterprise requirement. The N8WA4P12TB's single-NIC status and PoE class cannot be confirmed from the available spec data, and no operating environment ratings are provided for it.
Which should you choose: the N8WA4P12TB or the ND9326P?
Our take: The N8WA4P12TB is the stronger choice when a single-appliance deployment must cover both video surveillance and 4-door physical access control with no separate controller or power supply. Its 12 TB pre-installed storage eliminates drive procurement, and the unified event timeline linking door and camera data reduces integration complexity for smaller sites. However, on pure NVR capability the ND9326P outperforms it in three measurable areas: a specified 192 Mbps recording throughput versus no figure stated for the Speco; hardware decode to 7680×2560 at up to 120 fps per 4K channel versus 30 fps at 8 MP for the Speco; and RAID 0/1 redundancy versus no RAID option. The ND9326P also carries a broader analytics suite, dual gigabit NICs, ONVIF Profile S, and a documented −10 °C to 55 °C operating range. Choose the N8WA4P12TB for converged access-plus-video SMB sites on a Speco platform; choose the ND9326P for Vivotek-ecosystem deployments demanding high-throughput 4K recording, RAID resilience, and deeper video analytics.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Speco Technologies N8WA4P12TB | Vivotek ND9326P |
|---|---|---|
| Product Type | NVR + 4-Door Access Control | NVR (video only) |
| Recording Channels | 8 | 8 |
| Max Camera Resolution | 8 MP | 8 MP |
| Frame Rate | 30 fps | 60 fps |
| Video Compression | H.265 | H.265, H.264, MJPEG |
| Recording Throughput | — | 192 Mbps |
| Decoding Resolution | — | Up to 7680×2560 |
| Internal Storage (Included) | 12 TB (pre-installed) | None (HDD sold separately) |
| HDD Bays | — | 2 × 3.5" internal |
| RAID Support | — | RAID 0, 1 |
| PoE Standard | 802.3af | PoE+ |
| Ethernet Ports | — | 2 × 10/100/1000 Mbps |
| Network Throughput | — | 224 Mbps |
| Video Outputs | — | HDMI × 1, VGA × 1 |
| ONVIF | — | Profile S |
| Warranty | 3 Year | 2 Year |
Frequently Asked Questions
Which should you choose: the N8WA4P12TB or the ND9326P?
The N8WA4P12TB is the stronger choice when a single-appliance deployment must cover both video surveillance and 4-door physical access control with no separate controller or power supply. Its 12 TB pre-installed storage eliminates drive procurement, and the unified event timeline linking door and camera data reduces integration complexity for smaller sites. However, on pure NVR capability the ND9326P outperforms it in three measurable areas: a specified 192 Mbps recording throughput versus no figure stated for the Speco; hardware decode to 7680×2560 at up to 120 fps per 4K channel versus 30 fps at 8 MP for the Speco; and RAID 0/1 redundancy versus no RAID option. The ND9326P also carries a broader analytics suite, dual gigabit NICs, ONVIF Profile S, and a documented −10 °C to 55 °C operating range. Choose the N8WA4P12TB for converged access-plus-video SMB sites on a Speco platform; choose the ND9326P for Vivotek-ecosystem deployments demanding high-throughput 4K recording, RAID resilience, and deeper video analytics.
Does the N8WA4P12TB or ND9326P include hard drives out of the box?
The N8WA4P12TB ships with 12 TB of internal storage pre-installed. The ND9326P ships with no drives included—its spec sheet explicitly states 'HDD purchased separately'—so drives must be procured and installed before recording can begin.
Can either unit manage door access control as well as cameras?
Yes, but only the N8WA4P12TB. Speco specifies a 4-door access control subsystem with an integrated lock power supply and a unified video-and-access event timeline. The ND9326P is a pure NVR with 4 alarm inputs and 1 alarm output for basic dry-contact triggers, but no door controller or access management capability is listed in its specifications.
Which NVR is better suited to a high-resolution 4K camera deployment with RAID protection?
The ND9326P is better suited for this use case. It specifies hardware decoding at 3840×2160 @ 120 fps, a 192 Mbps recording throughput, dual 3.5-inch HDD bays with RAID 0 and RAID 1 support, and dual gigabit Ethernet. The N8WA4P12TB lists 8 MP recording at 30 fps with H.265, but no recording throughput figure, no RAID support, and no dual-NIC configuration is specified in the available data.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.