Pelco SRXP4-3V40-EBT-IR vs Pelco SRXV2-2V13-EBT-IR: Specification Comparison
Both the Pelco SRXP4-3V40-EBT-IR and SRXV2-2V13-EBT-IR are 2MP outdoor bullet cameras sharing the same 1/2.8-inch progressive-scan CMOS sensor, PoE Class 3 power, IK09 vandal rating, and IP66 ingress protection. The comparison centers on where the two series diverge: the Sarix Pro 4's motorized varifocal lens, higher frame rate, broader WDR, and richer edge analytics versus the Sarix Value 2's fixed focal-length design, wider temperature tolerance, NDAA Section 889 compliance, and lower acquisition cost implied by its positioning as a value-tier product.
In This Guide
How do the imaging specs compare?
Both cameras resolve 1920×1080 at the same 2MP sensor size, but their frame rates diverge sharply: the SRXP4-3V40-EBT-IR records at up to 60 fps versus the SRXV2-2V13-EBT-IR's 30 fps ceiling—a meaningful difference for fast-moving subjects in forensic review. Low-light sensitivity also favors the Pro 4: minimum illumination is rated at 0.01 lux (color) / 0 lux (IR) compared to 0.02 lux (color) / 0 lux (IR) on the Value 2. WDR headroom follows the same pattern—130 dB SureVision on the Pro 4 versus 120 dB on the Value 2—giving the Pro 4 a 10 dB advantage in scenes with extreme contrast such as entrance lobbies or loading-dock thresholds.
Lens architecture is the starkest optical difference. The SRXP4-3V40-EBT-IR ships with a 4.4–9.3 mm motorized varifocal (32–109° HFOV) that can be aimed and zoomed remotely after mounting. The SRXV2-2V13-EBT-IR's spec sheet lists a 13 mm fixed focal length (product name) alongside a 2.7–13.5 mm varifocal focal-length entry in the structured data; those two values are inconsistent within the provided specs and cannot be reconciled here—buyers should confirm the exact lens configuration with the datasheet before specifying. Both cameras include 850 nm IR illumination rated to 0 lux operation and an IR cut filter for day/night switching. Video compression for both includes H.265 and H.264; the Value 2 adds Motion JPEG while the Pro 4 adds Pelco Smart Compression.
What about installation and environment?
Both units carry IP66 ingress protection and IK09 vandal resistance, making them equivalent for outdoor surface and pendant mounting in most commercial and light-industrial environments. Power delivery is identical: PoE Class 3 (802.3af) with no secondary power supply required. The SRXP4-3V40-EBT-IR spec sheet lists an operating range of -10 °C to +70 °C (14 °F to 158 °F). The SRXV2-2V13-EBT-IR is rated -40 °C to +60 °C, giving it a significantly wider cold-start envelope—20 degrees Celsius colder at the low end—that is relevant for unheated outdoor enclosures in northern climates. Mount options per the specs: the Pro 4 supports wall, ceiling, and pendant; the Value 2 adds pole and corner mount options.
The SRXV2-2V13-EBT-IR carries an NDAA Section 889 compliance approval listed explicitly in its specs; no equivalent federal-procurement compliance marking appears in the SRXP4-3V40-EBT-IR spec data provided. Installers on U.S. federal or federally funded projects should treat this as a disqualifying delta for the Pro 4 until confirmed otherwise with Pelco documentation. Both cameras include onboard microSD storage support and HTTPS encryption. The RJ-45 connector is called out explicitly only in the Value 2 spec data; the Pro 4 spec data does not omit it but does not list it as a named field.
Which fits your VMS and analytics better?
ONVIF compliance differs in scope: the SRXP4-3V40-EBT-IR supports Profile S, Profile T, Profile G, and Profile M, while the SRXV2-2V13-EBT-IR is listed as Profile S and Profile T only. Profile G (recording management) and Profile M (metadata and analytics) on the Pro 4 enable tighter integration with ONVIF-conformant VMS platforms that consume event metadata streams—relevant if the VMS is expected to ingest edge-analytics events natively.
Edge analytics are available only on the SRXP4-3V40-EBT-IR: the spec data explicitly lists Smart Analytics covering Person/Vehicle Detection, Directional Violation, Loitering, Beam Crossing, Crowd Detection, and Tamper Alert. No edge analytics are listed for the SRXV2-2V13-EBT-IR in the provided specs. Both cameras list microphone support/audio capability and onboard microSD storage. The Pro 4 spec data notes 1 GB RAM / 512 MB Flash; the Value 2 is listed at 512 MB RAM / 256 MB Flash—the Pro 4's larger compute headroom aligns with its analytics workload. Both support HTTPS encryption for secure transport.
Which should you choose: the SRXP4-3V40-EBT-IR or the SRXV2-2V13-EBT-IR?
Our take: The SRXP4-3V40-EBT-IR is the stronger choice when edge analytics, a remotely adjustable motorized varifocal lens, or higher frame rates are required at the camera level. It delivers 60 fps versus 30 fps on the Value 2, 130 dB WDR versus 120 dB, and a full Smart Analytics suite (Person/Vehicle, Loitering, Beam Crossing, Directional Violation, Crowd Detection) that the SRXV2-2V13-EBT-IR does not list. It also adds ONVIF Profile G and Profile M for deeper VMS integration. Conversely, the SRXV2-2V13-EBT-IR is the correct choice for NDAA Section 889-regulated deployments—a compliance status not confirmed in the Pro 4 specs provided—and for extreme cold environments, where its -40 °C lower operating limit outperforms the Pro 4's -10 °C floor by 30 degrees. Buyers on federal or federally funded projects, or sites subject to sustained sub-zero temperatures, should default to the Value 2 pending Pro 4 compliance verification.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Pelco SRXP4-3V40-EBT-IR | Pelco SRXV2-2V13-EBT-IR |
|---|---|---|
| Series | Sarix Pro 4 | Sarix Value 2 |
| Resolution | 2MP (1920×1080) | 2MP (1920×1080) |
| Image Sensor | 1/2.8" Progressive Scan CMOS | 1/2.8" Progressive Scan CMOS |
| Lens / Focal Length | 4.4–9.3 mm motorized varifocal | 13 mm fixed (per model name); 2.7–13.5 mm listed in structured data — confirm with datasheet |
| Horizontal FOV | 32–109° | — |
| Aperture | F1.4 | F1.4 |
| Min Illumination (Color / IR) | 0.01 lux / 0 lux | 0.02 lux / 0 lux |
| WDR | 130 dB SureVision | 120 dB |
| Max Frame Rate | 60 fps | 30 fps |
| Video Compression | H.265; H.264; Smart Compression | H.265; H.264; Motion JPEG |
| IP Rating | IP66 | IP66 |
| IK / Impact Rating | IK09 | IK09 |
| Operating Temperature | -10 °C to +70 °C | -40 °C to +60 °C |
| Power Input / PoE Class | PoE 802.3af / Class 3 | PoE 802.3af / Class 3 |
| ONVIF Profiles | Profile S, T, G, M | Profile S, T |
| Edge Analytics | Person/Vehicle, Directional Violation, Loitering, Beam Crossing, Crowd Detection, Tamper Alert | — |
| Audio | Microphone supported | — |
| Edge Storage | microSD | microSD |
| HTTPS Encryption | Yes | Yes |
| NDAA Section 889 | — | Compliant |
| Warranty | 5-year | 5-year |
Frequently Asked Questions
Which should you choose: the SRXP4-3V40-EBT-IR or the SRXV2-2V13-EBT-IR?
The SRXP4-3V40-EBT-IR is the stronger choice when edge analytics, a remotely adjustable motorized varifocal lens, or higher frame rates are required at the camera level. It delivers 60 fps versus 30 fps on the Value 2, 130 dB WDR versus 120 dB, and a full Smart Analytics suite (Person/Vehicle, Loitering, Beam Crossing, Directional Violation, Crowd Detection) that the SRXV2-2V13-EBT-IR does not list. It also adds ONVIF Profile G and Profile M for deeper VMS integration. Conversely, the SRXV2-2V13-EBT-IR is the correct choice for NDAA Section 889-regulated deployments—a compliance status not confirmed in the Pro 4 specs provided—and for extreme cold environments, where its -40 °C lower operating limit outperforms the Pro 4's -10 °C floor by 30 degrees. Buyers on federal or federally funded projects, or sites subject to sustained sub-zero temperatures, should default to the Value 2 pending Pro 4 compliance verification.
Is the SRXP4-3V40-EBT-IR or SRXV2-2V13-EBT-IR better for low-light performance?
The SRXP4-3V40-EBT-IR has a slight edge: it is rated to 0.01 lux in color mode versus 0.02 lux for the SRXV2-2V13-EBT-IR. Both reach 0 lux with IR active. The Pro 4 also offers 130 dB WDR compared to 120 dB on the Value 2, which provides greater dynamic range when a scene mixes bright and dark zones.
Can either camera be used on a U.S. federal government project?
The SRXV2-2V13-EBT-IR is explicitly listed as NDAA Section 889 Compliant in the provided specs, making it the documented choice for federal and federally funded installations. No NDAA Section 889 compliance marking appears in the SRXP4-3V40-EBT-IR spec data supplied; buyers should verify directly with Pelco before specifying that model on a regulated project.
Do I need a VMS with built-in analytics if I choose the SRXP4-3V40-EBT-IR?
Not necessarily for basic detection use cases. The SRXP4-3V40-EBT-IR includes on-camera Smart Analytics covering Person/Vehicle Detection, Loitering, Directional Violation, Beam Crossing, Crowd Detection, and Tamper Alert. Its ONVIF Profile M support also allows a compatible VMS to consume those metadata events. The SRXV2-2V13-EBT-IR does not list edge analytics in the provided specs, so analytics processing would need to be handled by the VMS or a separate server.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.