Pelco SRXF3-8180-ES vs Pelco SRXF3-8360-ERS: Specification Comparison
Both the Pelco SRXF3-8180-ES and SRXF3-8360-ERS belong to the Sarix Fisheye 3 series—8MP outdoor fisheye cameras sharing the same sensor resolution (3264×2448), 2.7 mm f/2.5 lens, PoE+ power, IK10 impact rating, and Pelco Smart Analytics engine. The meaningful distinction between these two units lies in their field-of-view coverage angle, IR illumination design, and weatherproofing certification, making them legitimate cross-shop candidates for installers evaluating single-camera perimeter or ceiling-mount coverage.
In This Guide
How do the imaging specs compare?
Both cameras share an identical imaging foundation: 8MP resolution at 3264×2448 pixels, a 2.7 mm f/2.5 lens, F2.0 aperture, 12.5 fps at full resolution, H.264 and H.265 compression, and WDR up to 83 dB. The SRXF3-8180-ES is specified with a 180° panoramic field of view and a cited low-light sensitivity of 0.10 lux with IR at 850 nm and day/night switching. The SRXF3-8360-ERS is specified for 360° coverage with 360° integrated IR illumination at 850 nm and day/night operation; however, its minimum illumination lux figure is not stated in the provided specifications.
The SRXF3-8180-ES lists a dedicated minimum illumination value of 0.10 lux, giving installers a quantified low-light benchmark. The SRXF3-8360-ERS describes '360° integrated IR illumination' capable of 24/7 operation without external lighting, but no lux number is provided in the supplied spec data. Both units include WDR (up to 83 dB per shared spec data) and day/night switching with 850 nm IR. Neither unit lists an image sensor type or size in the provided specifications.
What about installation and environment?
The SRXF3-8180-ES carries IP66 and IP67 dual ratings, alongside IK10 impact resistance and an operating temperature of -40°C to +60°C. The SRXF3-8360-ERS is rated IP66 and NEMA 4X—a corrosion-resistance classification common in industrial and coastal environments—plus IK10 and the same -40°C to +60°C operating range. The SRXF3-8180-ES adds IP67 (submersion to 1 m), while the SRXF3-8360-ERS substitutes NEMA 4X (washdown and windblown rain resistance); neither rating is strictly superior—the right choice depends on the threat environment.
Both cameras are PoE+ (802.3at) Class 3, drawing power over a single Ethernet cable. Both support wall, ceiling, pole, pendant, and corner mounting per shared spec data. The SRXF3-8360-ERS lists physical dimensions of 6" × 6" × 2.81"; the SRXF3-8180-ES lists dimensions of 153.5 mm × 153.5 mm × 71.3 mm (approximately 6.04" × 6.04" × 2.81"), making the two units essentially identical in footprint. Shared storage temperature is specified as -10°C to +70°C and shared unit weight is listed as 1.001 kg (2.21 lb) with wall mount.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile S and Profile T, providing broad VMS compatibility. Both run Pelco Smart Analytics with 8 configurable behavior rules, H.265/H.264 compression with HDMS Smart Codec technology and idle-scene mode for bandwidth management, onboard microSD local storage, microphone support for audio input, and HTTPS encryption for secure streaming. Neither camera lists specific microSD capacity limits or audio output capability in the provided specifications.
Memory is listed identically for both units at 4 GB RAM and 4 GB Flash. No cloud storage, AI-classification tier differences, or VMS-exclusive feature distinctions are present in the provided specifications. From an integration standpoint, both cameras are functionally equivalent on the analytics and VMS-compatibility axis; the integration decision therefore reduces to which coverage angle and IR design the VMS operator needs for a given deployment zone.
Which should you choose: the SRXF3-8180-ES or the SRXF3-8360-ERS?
Our take: The SRXF3-8180-ES is the stronger choice when submersion protection (IP67) and a quantified low-light floor (0.10 lux) are required, while the SRXF3-8360-ERS is the stronger choice when full 360° perimeter coverage from a single mounting point and NEMA 4X corrosion resistance are the priority. Three concrete spec deltas define the split: (1) coverage angle—180° vs. 360°, which determines blind-spot exposure on open ceilings or rooftops; (2) weatherproofing—IP67 submersion rating on the -ES vs. NEMA 4X washdown/corrosion rating on the -ERS; (3) low-light spec—0.10 lux is documented for the -ES, while no lux figure is provided for the -ERS despite its 360° integrated IR claim. Both units are otherwise identical in resolution, PoE class, analytics, compression, IK10 rating, and operating temperature. Installers on indoor ceilings or stairwells should lean toward the -ERS for blind-spot elimination; coastal, industrial, or wet-area perimeters with submersion risk should evaluate the -ES.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Pelco SRXF3-8180-ES | Pelco SRXF3-8360-ERS |
|---|---|---|
| Series | Sarix Fisheye 3 | Sarix Fisheye 3 |
| Max Resolution | 3264 × 2448 (8MP) | 3264 × 2448 (8MP) |
| Field of View | 180° | 360° |
| Lens / Focal Length | 2.7 mm f/2.5 | 2.7 mm f/2.5 |
| Aperture | F2.0 | F2.0 |
| Min Illumination | 0.10 lux (IR, day/night) | — (not specified) |
| IR Illumination | 850 nm IR, day/night | 360° integrated IR, 850 nm, day/night |
| WDR | Up to 83 dB | Up to 83 dB |
| Max Frame Rate | 12.5 fps (full resolution) | 12.5 fps (full resolution) |
| Video Compression | H.265 / H.264 | H.265 / H.264 |
| IP Rating | IP66 / IP67 | IP66 / NEMA 4X |
| IK / Impact Rating | IK10 | IK10 |
| Operating Temperature | -40°C to +60°C | -40°C to +60°C |
| Power Input / PoE Class | PoE+ (802.3at) / Class 3 | PoE+ (802.3at) / Class 3 |
| Edge Storage | microSD | microSD |
| Audio | Microphone supported | Microphone supported |
| ONVIF Compliance | Profile S / Profile T | Profile S / Profile T |
| Analytics | Pelco Smart Analytics, 8 behaviors | Pelco Smart Analytics, 8 behaviors |
| Dimensions | 153.5 mm × 153.5 mm × 71.3 mm | 6" × 6" × 2.81" |
| Weight (with wall mount) | 1.001 kg (2.21 lb) | 1.001 kg (2.21 lb) |
| Warranty | 5-year | 5-year |
Frequently Asked Questions
Which should you choose: the SRXF3-8180-ES or the SRXF3-8360-ERS?
The SRXF3-8180-ES is the stronger choice when submersion protection (IP67) and a quantified low-light floor (0.10 lux) are required, while the SRXF3-8360-ERS is the stronger choice when full 360° perimeter coverage from a single mounting point and NEMA 4X corrosion resistance are the priority. Three concrete spec deltas define the split: (1) coverage angle—180° vs. 360°, which determines blind-spot exposure on open ceilings or rooftops; (2) weatherproofing—IP67 submersion rating on the -ES vs. NEMA 4X washdown/corrosion rating on the -ERS; (3) low-light spec—0.10 lux is documented for the -ES, while no lux figure is provided for the -ERS despite its 360° integrated IR claim. Both units are otherwise identical in resolution, PoE class, analytics, compression, IK10 rating, and operating temperature. Installers on indoor ceilings or stairwells should lean toward the -ERS for blind-spot elimination; coastal, industrial, or wet-area perimeters with submersion risk should evaluate the -ES.
Is the SRXF3-8180-ES or SRXF3-8360-ERS better for low-light performance?
Based on the provided specifications, only the SRXF3-8180-ES lists a minimum illumination figure—0.10 lux with IR and day/night switching. The SRXF3-8360-ERS describes 360° integrated IR at 850 nm capable of 24/7 operation but does not state a lux value in the available spec data. Installers requiring a documented low-light sensitivity number for design validation should note that figure is only available for the SRXF3-8180-ES.
Can the SRXF3-8360-ERS really eliminate blind spots that the SRXF3-8180-ES cannot?
Yes, based on the specified fields of view. The SRXF3-8360-ERS is rated for 360° coverage, meaning a single ceiling-mount unit captures the full horizontal plane without rotation or additional cameras. The SRXF3-8180-ES is rated for 180° panoramic coverage, which suits wall or corner mounts facing a defined zone but leaves the opposite hemisphere uncovered. For open-floor or rooftop perimeter applications where full surround coverage is needed, the 360° model requires fewer mounting points.
Does the SRXF3-8360-ERS have a better weather rating than the SRXF3-8180-ES?
They carry different—not clearly better or worse—weatherproofing certifications. The SRXF3-8180-ES is rated IP66 and IP67 (dust-tight and protected against submersion up to 1 m). The SRXF3-8360-ERS is rated IP66 and NEMA 4X (dust-tight, protected against windblown rain, splashing, and corrosion). If the installation involves temporary submersion or flooding risk, the -ES IP67 rating is relevant. If the environment involves corrosive agents, salt spray, or industrial washdown, the -ERS NEMA 4X rating is the more appropriate certification.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.