Geovision PBL880W-0010 vs Pelco SRXF3-8180-ES: Specification Comparison
Both the Geovision PBL880W-0010 and the Pelco SRXF3-8180-ES are outdoor-rated, 8MP fixed-lens panoramic IP cameras designed for wide-area single-unit coverage. The Geovision uses a 1.68mm bullet form factor delivering a 180° panoramic view, while the Pelco is a fisheye unit offering selectable 180° or 360° fields of view. Buyers evaluating either unit are likely seeking broad-coverage surveillance without multi-camera overlap, making these legitimate cross-shop candidates despite their different optical architectures.
In This Guide
How do the imaging specs compare?
Both cameras are rated at 8MP. The Geovision PBL880W-0010 uses a 1.68mm lens to achieve its fixed 180° panoramic field of view, pairs IR illumination at 850nm for active low-light performance, and lists WDR Pro as its dynamic range technology. No minimum lux figure is published in the provided specs beyond the descriptor 'Super Low Lux.' The Pelco SRXF3-8180-ES resolves to a stated 3264×2448 pixels and uses a 2.7mm f/2.5 lens (with a secondary spec entry of 1.4mm focal length — these two values are inconsistent in the provided data). Pelco specifies a concrete minimum illumination of 0.10 lux and lists WDR at up to 83dB, along with a day/night switching mechanism.
On frame rate, the Pelco SRXF3-8180-ES is specified at 12.5 fps at full resolution — a notable constraint for motion-sensitive applications. The Geovision PBL880W-0010 provides no frame rate figure in the supplied specs. The Pelco also supports both 180° and 360° field-of-view modes, adding operational flexibility the Geovision's fixed 180° panoramic bullet does not offer. The Geovision supports H.265 and H.264 compression; the Pelco's primary spec lists H.264 only, though an additional spec entry references H.265/H.264 — buyers should verify compression support directly with Pelco documentation.
What about installation and environment?
The Pelco SRXF3-8180-ES carries IP66, IP67, and IK10 ratings with a confirmed operating temperature range of -40°C to +60°C, making it a hardened outdoor unit suitable for harsh environments including vandal-prone areas. The Geovision PBL880W-0010 lists no IP ingress rating, IK impact rating, or operating temperature range in the provided specifications — buyers must consult the Geovision datasheet to verify environmental suitability before deploying outdoors.
For power, the Pelco requires PoE+ (802.3at, Class 3), which demands a PoE+ capable switch port or injector. The Geovision PBL880W-0010 lists no power input specification in the provided data. Mounting options favor the Pelco, which supports wall, ceiling, pole, pendant, and corner installations. The Geovision supports wall and pole mounts only per the provided specs. The Pelco also includes microSD on-board storage, while no local storage capability is listed for the Geovision.
Which fits your VMS and analytics better?
Both cameras declare ONVIF compliance. The Geovision PBL880W-0010 states ONVIF compatibility broadly, compatible with ONVIF-capable NVR and VMS platforms. The Pelco SRXF3-8180-ES specifies ONVIF Profile S and Profile T, the latter adding support for H.264/H.265 streaming, PTZ (including digital PTZ on fisheye de-warp), and metadata — a more precise integration assurance for modern VMS deployments.
On analytics, the Pelco SRXF3-8180-ES includes Pelco Smart Analytics with 8 defined behaviors running at the edge. The Geovision PBL880W-0010 lists 'AI' analytics, but no behavior count or specific analytic types are enumerated in the provided specs. Audio capability is documented only for the Pelco, which notes microphone support; the Geovision lists no audio specification. The Pelco also provides HTTPS encryption per spec; no equivalent security transport specification is listed for the Geovision.
Which should you choose: the PBL880W-0010 or the SRXF3-8180-ES?
Our take: The Pelco SRXF3-8180-ES is the stronger choice when installation environment, integration precision, and edge analytics are the primary decision drivers. It carries documented IP66/IP67/IK10 ratings and a -40°C to +60°C operating range that the Geovision PBL880W-0010 cannot be confirmed to match based on provided specs. The Pelco specifies a concrete 0.10 lux minimum illumination and WDR up to 83dB, while Geovision's IR 850nm active illumination and WDR Pro offer active night performance but without a published lux floor. The Pelco's ONVIF Profile S and Profile T compliance is more precisely defined than Geovision's generic ONVIF-compatible declaration. However, the Pelco's 12.5 fps cap at full resolution may be a constraint in fast-motion scenarios, and its PoE+ power requirement adds infrastructure cost. The Geovision PBL880W-0010 may be preferable where active IR illumination is essential and PoE+ infrastructure is unavailable — provided buyers first verify its environmental ratings from the datasheet.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision PBL880W-0010 | Pelco SRXF3-8180-ES |
|---|---|---|
| Resolution | 8MP | 8MP (3264×2448) |
| Lens / Focal Length | 1.68mm | 2.7mm f/2.5 (1.4mm also listed — verify) |
| Field of View | 180° panoramic (fixed) | 180° or 360° (selectable) |
| Form Factor | Panoramic Bullet | Fisheye |
| Min Illumination | Super Low Lux (no lux value stated) | 0.10 lux |
| IR Illumination | IR 850nm active | Day/Night (no active IR specified) |
| WDR | WDR Pro | WDR up to 83dB |
| Max Frame Rate | — (not specified) | 12.5 fps at full resolution |
| Video Compression | H.265; H.264 | H.264 (H.265 listed in secondary spec — verify) |
| IP Rating | — (not specified) | IP66; IP67 |
| Impact Rating | — (not specified) | IK10 |
| Operating Temperature | — (not specified) | -40°C to +60°C |
| Power Input | — (not specified) | PoE+ (802.3at, Class 3) |
| ONVIF Compliance | ONVIF (generic) | ONVIF Profile S; Profile T |
| Edge Storage | — (not specified) | microSD |
| Audio | — (not specified) | Microphone supported |
| Analytics | AI (no behavior count specified) | Pelco Smart Analytics; 8 behaviors |
| Warranty | — (not specified) | 5-year |
Frequently Asked Questions
Which should you choose: the PBL880W-0010 or the SRXF3-8180-ES?
The Pelco SRXF3-8180-ES is the stronger choice when installation environment, integration precision, and edge analytics are the primary decision drivers. It carries documented IP66/IP67/IK10 ratings and a -40°C to +60°C operating range that the Geovision PBL880W-0010 cannot be confirmed to match based on provided specs. The Pelco specifies a concrete 0.10 lux minimum illumination and WDR up to 83dB, while Geovision's IR 850nm active illumination and WDR Pro offer active night performance but without a published lux floor. The Pelco's ONVIF Profile S and Profile T compliance is more precisely defined than Geovision's generic ONVIF-compatible declaration. However, the Pelco's 12.5 fps cap at full resolution may be a constraint in fast-motion scenarios, and its PoE+ power requirement adds infrastructure cost. The Geovision PBL880W-0010 may be preferable where active IR illumination is essential and PoE+ infrastructure is unavailable — provided buyers first verify its environmental ratings from the datasheet.
Is the PBL880W-0010 or SRXF3-8180-ES better for low-light performance?
The Pelco SRXF3-8180-ES specifies a minimum illumination of 0.10 lux with a day/night mechanism, giving buyers a concrete low-light benchmark. The Geovision PBL880W-0010 uses active IR illumination at 850nm and lists 'Super Low Lux' as a descriptor, but no numeric lux floor is provided in the supplied specifications. For installations where a quantified low-light threshold matters, the Pelco offers a verifiable figure; for environments needing active IR throw, the Geovision's 850nm IR is a defined asset — though range distance is not specified.
Which camera is better suited for outdoor installations in extreme conditions?
The Pelco SRXF3-8180-ES is the confirmed choice for harsh outdoor deployment: it is rated IP66, IP67, and IK10, and is specified to operate from -40°C to +60°C. No IP ingress rating, impact rating, or operating temperature range is listed in the provided Geovision PBL880W-0010 specifications. Buyers must consult Geovision's datasheet before assuming the PBL880W-0010 meets the same environmental thresholds.
Will either camera work with my existing VMS without a dedicated integration?
Both cameras declare ONVIF compliance, so either should connect to an ONVIF-compatible VMS without a proprietary driver. The Pelco SRXF3-8180-ES goes further by specifying ONVIF Profile S and Profile T, which gives VMS administrators more precise assurance of streaming and metadata feature support. The Geovision PBL880W-0010 lists general ONVIF compatibility. For Pelco VMS environments, the SRXF3-8180-ES will have native integration; for Geovision VMS platforms, the PBL880W-0010 is the natural fit.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.