Pelco IMF82-1I vs Pelco SRXF3-8360-ES: Specification Comparison
Both the Pelco IMF82-1I and the Pelco SRXF3-8360-ES belong to the Sarix Fisheye 3 series and share the same 8MP (3264×2448) sensor, 2.7 mm f/2.5 lens, and 360° fisheye form factor. A buyer choosing between them is deciding between an indoor-rated unit and its outdoor-hardened counterpart. This comparison examines how their environmental ratings, operating temperature ranges, memory, and certified certifications diverge across imaging performance, installation suitability, and system integration.
In This Guide
How do the imaging specs compare?
Both cameras deliver identical core imaging performance: 3264×2448 (8MP) maximum resolution, a 2.7 mm f/2.5 lens with 1.4 mm focal length noted in the spec data, F2.0 aperture, 12.5 fps at full resolution, and a minimum illumination of 0.10 lux with day/night operation and IR (850 nm) support. WDR is specified for both at up to 83 dB. Neither model has an advantage over the other in raw sensor output, frame rate, or low-light sensitivity as provided in the specifications.
Video compression is listed as H.264 in the primary spec field for both units, with H.265 also noted in the extended compression field for both. The IMF82-1I spec lists 2 GB RAM and 512 MB Flash; the SRXF3-8360-ES lists 4 GB RAM and 4 GB Flash—a meaningful difference in on-board processing headroom that is not explained further in the provided specifications. Both support microSD edge storage and HTTPS encryption.
What about installation and environment?
The most significant hardware difference between the two models is environmental protection. The IMF82-1I carries an IP52 rating (protected against limited dust ingress and dripping water), making it suitable only for dry indoor ceilings. The SRXF3-8360-ES is rated IP66 and IP67 (dust-tight, protected against powerful water jets and temporary immersion), along with IK10 impact resistance shared by both models. Only the SRXF3-8360-ES is rated for outdoor deployment.
Operating temperature further separates the two: the IMF82-1I is specified for −10°C to +60°C, while the SRXF3-8360-ES operates from −40°C to +60°C—a 30°C wider cold-side range that covers outdoor installations in northern or high-altitude climates. Both cameras are powered by PoE+ (802.3at, Class 3) and share the same mounting options (wall, ceiling, pole, pendant, corner). The IMF82-1I dimensions are listed as 6″×6″×2.4″; the SRXF3-8360-ES is listed as 153.5 mm×153.5 mm×71.3 mm (approximately 6.0″×6.0″×2.8″), with a stated weight of 1.001 kg (2.21 lb) with wall mount. Weight for the IMF82-1I is not provided in the supplied specifications.
Which fits your VMS and analytics better?
Both cameras declare ONVIF Profile S and Profile T compliance in their primary fields, with ONVIF Profile G also noted in the extended fields for both, enabling recording and edge-storage interoperability. Both support Pelco Smart Analytics with 8 on-camera behavior classes (object detection, loitering, line crossing, and others per the spec). The IMF82-1I spec notes an analytics operating mode caveat: analytics are disabled in high-frame-rate and dewarped video modes. The SRXF3-8360-ES spec notes analytics are disabled in a specific operating mode as well, though the exact mode label in the raw data is truncated.
Both cameras list microphone support for audio. Both support microSD on-board storage. The SRXF3-8360-ES spec additionally references HDSM Smart Codec technology and idle-scene-mode bandwidth management, which are not explicitly listed in the IMF82-1I spec data provided. Certifications differ: the IMF82-1I lists UL, cUL, CE, RoHS, RCM, EAC, UKCA, KC, BIS, and NOM; certification data for the SRXF3-8360-ES in the supplied specs references mounting types rather than regulatory marks, so a direct certification comparison cannot be made from the provided data.
Which should you choose: the IMF82-1I or the SRXF3-8360-ES?
Our take: The SRXF3-8360-ES is the stronger choice when the installation environment is outdoors or subject to moisture, dust, vandalism, or extreme cold. Its IP66/IP67 rating versus the IMF82-1I's IP52 means it is fully dust-tight and water-jet resistant where the indoor model is not. Its −40°C lower operating limit versus −10°C extends usability across climates where the IMF82-1I would fail. Its 4 GB RAM and 4 GB Flash versus the IMF82-1I's 2 GB RAM and 512 MB Flash also provide greater on-board processing and storage headroom. Where both cameras are equally matched—8MP resolution, 0.10 lux sensitivity, 12.5 fps, PoE+ Class 3, H.264/H.265, 8-behavior analytics, ONVIF Profile S/T/G, microSD, and a 5-year warranty—the choice reduces purely to deployment environment. Choose the IMF82-1I only for dry, temperature-controlled indoor ceilings where its IP52 rating is sufficient.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Pelco IMF82-1I | Pelco SRXF3-8360-ES |
|---|---|---|
| Series | Sarix Fisheye 3 | Sarix Fisheye 3 |
| Max Resolution | 3264 × 2448 (8MP) | 3264 × 2448 (8MP) |
| Lens / Focal Length | 2.7 mm f/2.5 / 1.4 mm | 2.7 mm f/2.5 / 1.4 mm |
| Aperture | F2.0 | F2.0 |
| Min Illumination | 0.10 lux | 0.10 lux |
| IR / Night Vision | IR 850 nm; Day/Night | IR 850 nm; Day/Night |
| WDR | Up to 83 dB | Up to 83 dB |
| Max Frame Rate | 12.5 fps at full resolution | 12.5 fps at full resolution |
| Video Compression | H.265; H.264 | H.265; H.264 |
| IP Rating | IP52 | IP66 / IP67 |
| Impact Rating | IK10 | IK10 |
| Operating Temperature | −10°C to +60°C | −40°C to +60°C |
| Environment Rating | Indoor | Outdoor |
| Power Input / PoE Class | PoE+ (802.3at) / Class 3 | PoE+ (802.3at) / Class 3 |
| On-board Memory | 2 GB RAM, 512 MB Flash | 4 GB RAM, 4 GB Flash |
| Edge Storage | microSD | microSD |
| Audio | Microphone supported | Microphone supported |
| ONVIF Compliance | Profile S; Profile T; Profile G | Profile S; Profile T; Profile G |
| Analytics | Pelco Smart Analytics; 8 behaviors | Pelco Smart Analytics; 8 behaviors |
| Dimensions | 6" × 6" × 2.4" | 153.5 mm × 153.5 mm × 71.3 mm (~6.0" × 6.0" × 2.8") |
| Weight | — | 1.001 kg (2.21 lb) with wall mount |
| Warranty | 5 years | 5 years |
Frequently Asked Questions
Which should you choose: the IMF82-1I or the SRXF3-8360-ES?
The SRXF3-8360-ES is the stronger choice when the installation environment is outdoors or subject to moisture, dust, vandalism, or extreme cold. Its IP66/IP67 rating versus the IMF82-1I's IP52 means it is fully dust-tight and water-jet resistant where the indoor model is not. Its −40°C lower operating limit versus −10°C extends usability across climates where the IMF82-1I would fail. Its 4 GB RAM and 4 GB Flash versus the IMF82-1I's 2 GB RAM and 512 MB Flash also provide greater on-board processing and storage headroom. Where both cameras are equally matched—8MP resolution, 0.10 lux sensitivity, 12.5 fps, PoE+ Class 3, H.264/H.265, 8-behavior analytics, ONVIF Profile S/T/G, microSD, and a 5-year warranty—the choice reduces purely to deployment environment. Choose the IMF82-1I only for dry, temperature-controlled indoor ceilings where its IP52 rating is sufficient.
Is the IMF82-1I or SRXF3-8360-ES better for low light?
Both cameras are specified at the same minimum illumination of 0.10 lux with day/night operation and IR (850 nm) support. Neither model has a low-light advantage over the other based on the provided specifications.
Can I use the IMF82-1I outdoors?
No. The IMF82-1I carries an IP52 rating, which provides only limited protection against dripping water and dust ingress. It is designated as an indoor camera in its specifications. For outdoor use, the SRXF3-8360-ES with IP66/IP67 and a −40°C lower operating temperature is the correct choice.
Do both cameras support the same VMS and analytics platform?
Yes. Both the IMF82-1I and SRXF3-8360-ES are Sarix Fisheye 3 series cameras with identical ONVIF Profile S, T, and G declarations and the same Pelco Smart Analytics engine offering 8 on-camera behavior classes. VMS compatibility and analytics capability are equivalent across both models based on the provided specifications.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.