Honeywell 8675I300SR-2-N vs Datalogic HS7500SR

BARCODE SCANNER COMPARISON

Honeywell 8675I300SR-2-N vs Datalogic HS7500SR: Specification Comparison

Both the Honeywell 8675I300SR-2-N and the Datalogic HS7500SR are wearable Bluetooth ring scanners designed for hands-free 1D/2D barcode capture in warehouse and logistics environments. Each targets the same operational profile — workers who need continuous scanning without holding a device — making them direct cross-shop candidates for procurement teams evaluating wearable scanner deployments. This comparison examines scan capability, physical and environmental durability, and battery and connectivity specifications as declared in each product's published data.



What barcode types and imaging resolution does each scanner support?

The Honeywell 8675I300SR-2-N uses an area imager with an 844 × 640 pixel array and is rated to decode damaged, low-contrast, and high-density 1D and 2D barcodes. No explicit symbology list is provided in the published specs beyond the general 1D/2D classification.

The Datalogic HS7500SR specifies an optical resolution of 1280 × 960 pixels and lists explicit symbology support: QR Code, Data Matrix, PDF417, Code 128, and Code 39. The higher pixel count gives the HS7500SR a documented imaging advantage on paper, though real-world decode performance depends on firmware and optics not detailed in these specs.

Buyers requiring confirmed PDF417 or Data Matrix support should note that the HS7500SR lists those symbologies explicitly, while the Honeywell 8675I300SR-2-N's symbology coverage is not enumerated in the available spec data.


How do the two scanners compare on physical ruggedness and operating environment?

The Honeywell 8675I300SR-2-N carries an IP55 ingress-protection rating, confirming resistance to dust ingress and low-pressure water jets from any direction — a meaningful seal for environments with wash-down exposure or airborne particulates.

The Datalogic HS7500SR is rated IK06 for impact resistance (withstands 1 joule impact per IEC 62262) and specifies an operating temperature range of 0 to 50 °C (32 to 122 °F). No IP rating is provided in the published specs for the HS7500SR.

The two ratings address different threat vectors: the Honeywell's IP55 protects against ingress; the Datalogic's IK06 addresses mechanical impact. If both dust/water sealing and impact protection are required, buyers should seek supplemental documentation for the missing rating on each unit before specifying.


How do battery capacity, weight, and connectivity differ between the two units?

The Honeywell 8675I300SR-2-N is rated at 28 grams and 380 mAh. Its light weight is a direct ergonomic advantage for workers wearing the ring scanner for full shifts. Connectivity is Bluetooth wireless; no wired interface is listed.

The Datalogic HS7500SR carries a 670 mAh battery — 76% more capacity than the Honeywell — and supports both Bluetooth and USB interfaces. Its published weight is 1.95 lb (approximately 884 grams), though the dimensional spec of 50 × 45 × 16 mm and a separate raw weight field of 0.09 (unit unspecified) suggest the 1.95 lb figure likely reflects packaged or accessory-inclusive weight rather than the bare ring unit; buyers should verify actual worn weight with the manufacturer.

The HS7500SR's larger battery favors longer untethered operation. The 8675I300SR-2-N's sub-30-gram form factor favors comfort in high-repetition scan environments. The HS7500SR's USB interface adds a wired fallback option not present in the Honeywell's published specs.


Which should you choose: the 8675I300SR-2-N or the HS7500SR?

Our take: The 8675I300SR-2-N is the stronger choice when ingress protection, ultra-light wearability, and a 3-year warranty are the primary procurement criteria. At 28 g with an IP55 rating and a 3-year warranty versus the HS7500SR's unspecified IP rating, a flagged weight anomaly (1.95 lb vs. 50 × 45 × 16 mm body), and a 1-year warranty, the Honeywell presents lower long-term replacement risk in wet or dusty environments. Conversely, the HS7500SR's 670 mAh battery outpaces the Honeywell's 380 mAh by 76%, its 1280 × 960 pixel imager exceeds the Honeywell's 844 × 640, and it explicitly lists PDF417 and Data Matrix symbologies. The HS7500SR better suits Datalogic-ecosystem deployments requiring longer untethered run time and confirmed 2D symbology breadth, while the 8675I300SR-2-N suits dust- and moisture-exposed operations where weight, seal rating, and warranty depth matter most.


Side-by-Side Comparison

Spec-for-spec, from manufacturer data.

SpecificationHoneywell 8675I300SR-2-NDatalogic HS7500SR
Product TypeWearable Ring ScannerWearable Ring Scanner
Scan Engine1D/2D Area Imager1D/2D
Optical Resolution844 × 640 pixels1280 × 960 pixels
Explicit Symbologies ListedQR Code, Data Matrix, PDF417, Code 128, Code 39
Barcode Decode NoteDamaged, low-contrast & high-density codes
ConnectivityBluetoothBluetooth; USB
Battery Capacity380 mAh670 mAh
Weight (bare unit)28 gNot clearly specified (see notes)
Dimensions50 × 45 × 16 mm / 1.9 × 1.7 × 0.6 in
IP RatingIP55
Impact RatingIK06
Operating Temperature0 to 50 °C / 32 to 122 °F
Power Supply5 VDC
Country of OriginVN (Vietnam)
Warranty3 years1 year
Compatible Platform NoteDatalogic Enterprise Hardware

Frequently Asked Questions

Which should you choose: the 8675I300SR-2-N or the HS7500SR?

The 8675I300SR-2-N is the stronger choice when ingress protection, ultra-light wearability, and a 3-year warranty are the primary procurement criteria. At 28 g with an IP55 rating and a 3-year warranty versus the HS7500SR's unspecified IP rating, a flagged weight anomaly (1.95 lb vs. 50 × 45 × 16 mm body), and a 1-year warranty, the Honeywell presents lower long-term replacement risk in wet or dusty environments. Conversely, the HS7500SR's 670 mAh battery outpaces the Honeywell's 380 mAh by 76%, its 1280 × 960 pixel imager exceeds the Honeywell's 844 × 640, and it explicitly lists PDF417 and Data Matrix symbologies. The HS7500SR better suits Datalogic-ecosystem deployments requiring longer untethered run time and confirmed 2D symbology breadth, while the 8675I300SR-2-N suits dust- and moisture-exposed operations where weight, seal rating, and warranty depth matter most.

Which scanner has better battery life — the 8675I300SR-2-N or the HS7500SR?

Based on published battery capacity, the Datalogic HS7500SR has the larger battery at 670 mAh versus the Honeywell 8675I300SR-2-N's 380 mAh — a 76% capacity advantage. Neither datasheet specifies rated scan cycles or hours per charge, so real-world run time comparison requires manufacturer testing data not present in these specs.

Is the 8675I300SR-2-N or the HS7500SR better protected against water and dust?

The Honeywell 8675I300SR-2-N carries an explicit IP55 rating confirming dust and low-pressure water-jet resistance. The Datalogic HS7500SR's published specs list an IK06 mechanical impact rating but no IP ingress rating. If liquid or particulate exposure is a job-site requirement, the 8675I300SR-2-N has a verified published rating; buyers should request IP documentation from Datalogic before specifying the HS7500SR for those environments.

Which scanner carries a longer warranty?

The Honeywell 8675I300SR-2-N is covered by a 3-year warranty per its published specifications. The Datalogic HS7500SR is covered by a 1-year manufacturer warranty. For total cost of ownership calculations, the Honeywell's longer coverage period reduces potential out-of-warranty repair or replacement exposure.



Get a Second Opinion on Your Camera Choice

Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.