Unitech HT730-LJ6122BG vs Datalogic HS7500SR: Specification Comparison
Both the Unitech HT730-LJ6122BG and the Datalogic HS7500SR are wearable 2D barcode scanners designed for hands-free operation in warehouse and logistics environments. The HT730-LJ6122BG is a body-worn Android-based computer with an integrated scan engine, display, and cellular radios, while the HS7500SR is a ring/finger-worn scan module that pairs with a host device via Bluetooth. Buyers evaluating wearable scanning solutions for pick-pack and receiving operations would legitimately cross-shop these two products.
In This Guide
- How do the two scanners compare on scan engine capability and barcode coverage?
- Which device offers longer shift endurance and greater physical durability?
- How do the two devices differ in connectivity options and ecosystem compatibility?
- Which should you choose: the HT730-LJ6122BG or the HS7500SR?
- Side-by-Side Specs
- FAQ
How do the two scanners compare on scan engine capability and barcode coverage?
The Unitech HT730-LJ6122BG uses a 2D area imager operating at 60 fps with a 30-degree tilt-down scan pattern. It reads the full range of 1D symbologies (Code 128, Code 39, UPC, EAN, and all standard linear codes), 2D symbologies (QR Code, Data Matrix, PDF417, Dot Code), and OCR text.
The Datalogic HS7500SR is also rated as a 1D/2D scanner covering QR Code, Data Matrix, PDF417, Code 128, and Code 39. Its optical sensor is specified at 1280 × 960 pixels resolution. Scan rate is not stated in the provided specifications. Dot Code and OCR are not listed for the HS7500SR.
On documented scan engine detail, the HT730-LJ6122BG provides more granular data: a confirmed frame rate of 60 fps, explicit OCR support, and Dot Code coverage. The HS7500SR lists a sensor resolution but does not specify a scan rate, leaving a gap for direct throughput comparison.
Which device offers longer shift endurance and greater physical durability?
The Unitech HT730-LJ6122BG carries a 6700 mAh removable battery with a specified runtime of 20–26 hours of continuous operation. Its drop rating is 1.8 m to concrete, extendable to 2.4 m with an optional bumper. These figures directly target extended warehouse shifts without a mid-shift battery swap.
The Datalogic HS7500SR is specified with a 670 mAh battery — one-tenth the capacity of the Unitech — and no battery runtime figure is provided in the supplied specifications. Its impact resistance is rated IK06, which is a standardized mechanical impact classification; no drop-to-concrete height is listed. Operating temperature is documented at 0 to 50 °C.
The power delta is substantial: 6700 mAh vs. 670 mAh. The HS7500SR is a ring scanner that depends on a host device for sustained compute power; its small cell may be sized for the scanner module alone rather than a full computer, but no runtime spec is provided to confirm this. The HT730-LJ6122BG's drop spec (1.8 m concrete) is a concrete durability claim; the HS7500SR's IK06 rating is an impact standard but not directly translatable to a drop height without additional data.
How do the two devices differ in connectivity options and ecosystem compatibility?
The Unitech HT730-LJ6122BG runs Android 10 and integrates Wi-Fi (2×2 MU-MIMO), Bluetooth, and Dual SIM 4G LTE in a single body-worn unit. It includes a 4-inch display, 29-key keypad, and a 13 MP camera, functioning as a standalone mobile computer. This makes it platform-independent — it does not require a separate host device.
The Datalogic HS7500SR connects via Bluetooth and USB. The provided specifications note compatibility with Datalogic Enterprise Hardware, indicating it is designed to pair with a Datalogic host device (mobile computer or terminal) rather than operate standalone. Wi-Fi and cellular are not listed; those capabilities would reside in the host device.
The architectural difference is significant for procurement: the HT730-LJ6122BG is an all-in-one wearable computer; the HS7500SR is a peripheral scan module. Buyers already invested in the Datalogic enterprise ecosystem gain a lightweight ring scanner addition; buyers without an existing Datalogic host would need to account for that additional hardware cost and management layer. No WMS or MDM compatibility data is provided for either product in the supplied specifications.
Which should you choose: the HT730-LJ6122BG or the HS7500SR?
Our take: The HT730-LJ6122BG is the stronger choice when a buyer needs a self-contained wearable computer with all-day battery life and multi-radio connectivity in a single device. Three concrete spec deltas drive this: battery capacity is 6700 mAh vs. 670 mAh, the HT730-LJ6122BG documents a 20–26 hour runtime while no runtime figure is provided for the HS7500SR, and the Unitech adds Dual SIM 4G and Wi-Fi 2×2 MU-MIMO versus Bluetooth-only on the HS7500SR. The HS7500SR is better suited to operations already standardized on Datalogic enterprise terminals, where a lightweight (50 × 45 × 16 mm) ring-form Bluetooth peripheral adds ergonomic value without replacing the existing host infrastructure. Buyers should note the HS7500SR's IK06 impact rating is the only durability figure available; no concrete drop height is specified, making a direct ruggedness comparison incomplete.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Unitech HT730-LJ6122BG | Datalogic HS7500SR |
|---|---|---|
| Product Type | Wearable Computer / Body-Worn Scanner | Ring / Wearable Scan Module |
| Scan Engine | 2D Area Imager | 1D/2D |
| Scan Rate | 60 fps | — |
| Optical Resolution | — | 1280 × 960 pixels |
| Symbologies — 2D | QR Code, Data Matrix, PDF417, Dot Code | QR Code, Data Matrix, PDF417 |
| Symbologies — 1D | Code 128, Code 39, UPC, EAN, all standard linear | Code 128, Code 39 |
| OCR Support | Yes | — |
| Battery Capacity | 6700 mAh (removable) | 670 mAh |
| Battery Runtime | 20–26 hours continuous | — |
| Drop Rating | 1.8 m to concrete; 2.4 m with bumper | — |
| Impact Rating | — | IK06 |
| Operating Temp | — | 0 to 50 °C / 32 to 122 °F |
| Connectivity | Wi-Fi 2×2 MU-MIMO, Bluetooth, Dual SIM 4G | Bluetooth, USB |
| Operating System | Android 10 | — |
| Display / Screen | 4-inch | — |
| Keypad | 29-key | — |
| Camera | 13 MP | — |
| Dimensions | — | 50 × 45 × 16 mm / 1.9 × 1.7 × 0.6 in |
| Weight | — | 1.95 lb |
| Warranty | Manufacturer Warranty (duration not specified) | 1 year |
Frequently Asked Questions
Which should you choose: the HT730-LJ6122BG or the HS7500SR?
The HT730-LJ6122BG is the stronger choice when a buyer needs a self-contained wearable computer with all-day battery life and multi-radio connectivity in a single device. Three concrete spec deltas drive this: battery capacity is 6700 mAh vs. 670 mAh, the HT730-LJ6122BG documents a 20–26 hour runtime while no runtime figure is provided for the HS7500SR, and the Unitech adds Dual SIM 4G and Wi-Fi 2×2 MU-MIMO versus Bluetooth-only on the HS7500SR. The HS7500SR is better suited to operations already standardized on Datalogic enterprise terminals, where a lightweight (50 × 45 × 16 mm) ring-form Bluetooth peripheral adds ergonomic value without replacing the existing host infrastructure. Buyers should note the HS7500SR's IK06 impact rating is the only durability figure available; no concrete drop height is specified, making a direct ruggedness comparison incomplete.
Can the Datalogic HS7500SR work without a separate Datalogic device?
Based on the provided specifications, the HS7500SR is listed as compatible with Datalogic Enterprise Hardware and connects via Bluetooth or USB, indicating it is designed to operate as a peripheral scan module paired to a host device. No standalone operating system or display is specified. The HT730-LJ6122BG, by contrast, runs Android 10 and functions as an independent wearable computer.
Is the HT730-LJ6122BG or HS7500SR better suited for full warehouse shifts without recharging?
The HT730-LJ6122BG specifies a 6700 mAh removable battery rated for 20–26 hours of continuous operation. The HS7500SR lists a 670 mAh battery with no runtime figure provided in the available specifications. On documented battery endurance, the HT730-LJ6122BG has a clear advantage for uninterrupted extended shifts.
Do both scanners read the same barcode types?
There is significant overlap: both devices cover QR Code, Data Matrix, PDF417, Code 128, and Code 39. The HT730-LJ6122BG additionally lists Dot Code and OCR text recognition, and covers UPC, EAN, and all standard linear codes explicitly. The HS7500SR's symbology list in the provided specifications does not include Dot Code or OCR. Buyers with Dot Code or OCR requirements should verify HS7500SR support directly with Datalogic.
More Barcode Scanner Comparisons
- Unitech HT730-LJ6122BG vs Honeywell 8690IB601-2
- Unitech HT730-LJ6122BG vs Honeywell 8690IB201-2-N
- Unitech HT730-LJ6122BG vs Honeywell 8680I400-2
- Unitech HT730-LJ6122BG vs Unitech HT730-LJ6142BG
- Unitech HT730-LJ6142BG vs Datalogic HS7500SR
- Unitech HT730-LJ6142BG vs Honeywell 8690IB601-2
Barcode Scanner Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.