Hanwha XNP-9250R vs i-PRO U61300-ZYPR: Specification Comparison
Both the Hanwha XNP-9250R and the i-PRO WV-U61300-ZYPR are 8MP (4K) PTZ network cameras, placing them in the same resolution class and camera-type category for cross-shopping purposes. This comparison covers imaging performance, installation requirements, and integration capabilities strictly as stated in the provided specifications. Buyers evaluating a 4K PTZ for perimeter, critical-infrastructure, or large-venue deployments will find meaningful differences in environmental hardening, lens reach, IR capability, and analytics depth between the two models.
In This Guide
How do the imaging specs compare?
The XNP-9250R uses a 1/2.8" CMOS sensor delivering 8MP (3840×2160) at up to 30fps, paired with a 5–125mm DC auto-iris lens offering 25x optical zoom (32x digital, 800x combined) and a maximum wide-end aperture of F1.6. Its minimum illumination is rated at 0.1 lux color and 0 lux with IR active, supported by an onboard IR illuminator effective to 200m (656ft). Extreme WDR is rated at 120dB, and digital image stabilization is provided via a built-in gyro sensor. The i-PRO WV-U61300-ZYPR is specified at 4K (8MP) resolution with H.265/H.264/MJPEG compression, but the provided specifications do not disclose sensor size, focal length, optical zoom ratio, minimum illumination, WDR rating, or IR capability for that model.
On the lens and low-light side, the XNP-9250R's specs are fully detailed: angular field of view spans H 57.42° (wide) to 2.71° (tele), with DORI detection distances reaching 3,246.9m at tele and identification at 324.7m at tele. The U61300-ZYPR's corresponding optical and low-light parameters are not present in the supplied specifications, so no direct numerical comparison is possible for those attributes.
What about installation and environment?
The XNP-9250R is built for outdoor and harsh-environment deployment: it carries IP66, IK10, NEMA4X, and NEMA-TS 2 ratings, operates from -40°C to +55°C (-40°F to +131°F), and features a spinning-dry water-removal mechanism. It is powered by HPoE (IEEE 802.3bt, Class 6, Type 3, injector included), drawing a typical 20W and up to 40W. Its aluminum-body construction weighs 3.2kg with dimensions of Ø158×293.3mm.
The i-PRO WV-U61300-ZYPR is described as an indoor PTZ camera with wall and ceiling mount options, powered by standard PoE over RJ-45. No IP rating, IK rating, operating temperature range, ingress protection class, PoE class, power consumption, weight, or physical dimensions are provided in the supplied specifications. Based solely on the available data, the U61300-ZYPR is not specified for outdoor or environmentally demanding installations.
Which fits your VMS and analytics better?
The XNP-9250R declares ONVIF Profile S, G, and T compliance, plus Wisenet SUNAPI (HTTP API) and the Wisenet open platform. Onboard edge analytics include object auto-tracking (person/vehicle), target lock tracking, directional detection, fog detection, face detection, motion detection (8-zone polygonal), and appear/disappear detection. It supports up to 32 polygonal privacy masks, dual Micro SD/SDHC/SDXC slots (up to 1TB total), and 4GB RAM with 512MB flash. Security protocols include 802.1X (EAP-TLS, EAP-LEAP), HTTPS/SSL, digest authentication, IP filtering, and device certificates.
The U61300-ZYPR lists ONVIF Profile S and T, and specifies VMS compatibility with i-PRO WJ-NU series, Milestone, Genetec, and Axis Camera Station. No edge analytics, audio I/O, privacy masking, on-board storage, RAM, or security protocol details are provided in the supplied specifications for this model. Buyers requiring confirmed VMS compatibility with Milestone or Genetec out of the box may find the U61300-ZYPR's explicit VMS list useful, while those needing documented edge analytics or on-board recording must rely on the XNP-9250R's published spec set.
Which should you choose: the XNP-9250R or the U61300-ZYPR?
Our take: The XNP-9250R is the stronger choice when outdoor hardening, long-range IR coverage, or onboard analytics are primary requirements. Spec-for-spec, three concrete differentials stand out: the XNP-9250R carries IP66/IK10/NEMA4X environmental ratings and a -40°C to +55°C operating range versus no environmental rating or temperature data published for the U61300-ZYPR; it provides 200m IR illumination with 0-lux capability versus no IR or minimum-illumination figure stated for the U61300-ZYPR; and it pairs its 8MP sensor with a 25x optical zoom lens and documented 120dB WDR versus no lens, zoom, or WDR figures published for the U61300-ZYPR. The U61300-ZYPR explicitly lists Milestone and Genetec VMS compatibility, which may matter on specific enterprise platforms. However, given the quantity of unpublished specs for the U61300-ZYPR, buyers should obtain a full datasheet before finalizing any selection.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha XNP-9250R | i-PRO U61300-ZYPR |
|---|---|---|
| Resolution | 8MP (4K / 3840×2160) | 4K (8MP) |
| Image Sensor | 1/2.8" CMOS | — |
| Lens / Focal Length | 5–125mm DC auto iris | — |
| Optical Zoom | 25x (32x digital, 800x total) | — |
| Min. Illumination | 0.1 lux color / 0 lux IR | — |
| IR Range | 200m (656ft), Wise IR | — |
| WDR | Extreme WDR 120dB | — |
| Max Frame Rate | 30fps | — |
| Video Compression | H.265 / H.264 / MJPEG | H.265 / H.264 / MJPEG |
| ONVIF | Profile S / G / T | Profile S / T |
| IP Rating | IP66 | — |
| IK / Impact Rating | IK10 | — |
| NEMA Rating | NEMA4X, NEMA-TS 2 | — |
| Operating Temperature | -40°C to +55°C (-40°F to +131°F) | — |
| Power Input / PoE Class | HPoE IEEE 802.3bt Class 6 Type 3 (injector included) | PoE (class not specified) |
| Power Consumption | Typical 20W / Max 40W | — |
| Edge Storage | Dual Micro SD/SDHC/SDXC up to 1TB | — |
| Onboard Analytics | Person/vehicle tracking, face detection, fog detection, directional detection, appear/disappear | — |
| VMS Compatibility | Wisenet SUNAPI; ONVIF platforms | i-PRO WJ-NU; Milestone; Genetec; Axis Camera Station; ONVIF platforms |
| Pan Range | 360° endless | — |
| Tilt Range | 110° (-20° to 90°) | — |
| Mount Type | — | Wall; Ceiling |
| Dimensions | Ø158×293.3mm (6.22×11.55") | — |
| Weight | 3.2kg (7.05lb) | — |
Frequently Asked Questions
Which should you choose: the XNP-9250R or the U61300-ZYPR?
The XNP-9250R is the stronger choice when outdoor hardening, long-range IR coverage, or onboard analytics are primary requirements. Spec-for-spec, three concrete differentials stand out: the XNP-9250R carries IP66/IK10/NEMA4X environmental ratings and a -40°C to +55°C operating range versus no environmental rating or temperature data published for the U61300-ZYPR; it provides 200m IR illumination with 0-lux capability versus no IR or minimum-illumination figure stated for the U61300-ZYPR; and it pairs its 8MP sensor with a 25x optical zoom lens and documented 120dB WDR versus no lens, zoom, or WDR figures published for the U61300-ZYPR. The U61300-ZYPR explicitly lists Milestone and Genetec VMS compatibility, which may matter on specific enterprise platforms. However, given the quantity of unpublished specs for the U61300-ZYPR, buyers should obtain a full datasheet before finalizing any selection.
Is the XNP-9250R or WV-U61300-ZYPR better for low-light and night surveillance?
Based on the provided specifications, the XNP-9250R is the only model with published low-light figures: 0.1 lux color and 0 lux with IR active, plus an IR illuminator rated to 200m. The WV-U61300-ZYPR does not list minimum illumination, IR capability, or WDR values in the supplied specifications, so no comparison can be made on those attributes.
Can either camera be installed outdoors?
The XNP-9250R is explicitly rated IP66, IK10, and NEMA4X with an operating temperature range of -40°C to +55°C, making it suitable for outdoor and harsh environments. The WV-U61300-ZYPR is described as an indoor PTZ camera in the provided specifications, with no IP rating or temperature range published. It is not specified for outdoor installation based on the available data.
Which camera integrates better with third-party VMS platforms like Milestone or Genetec?
The WV-U61300-ZYPR explicitly lists compatibility with Milestone, Genetec, i-PRO WJ-NU series, and Axis Camera Station in its published specifications, alongside ONVIF Profile S and T. The XNP-9250R declares ONVIF Profile S, G, and T plus Wisenet SUNAPI, but does not list Milestone or Genetec by name in the provided specifications. If confirmed named-VMS compatibility with Milestone or Genetec is required, the U61300-ZYPR's spec sheet addresses that directly.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.