i-PRO WV-U61300-ZYPR 8MP Indoor PTZ Camera
Overview
The WV-U61300-ZYPR is an 8MP indoor PTZ (pan-tilt-zoom) camera for retail floors, warehouses, conference spaces, and corporate lobbies where motorized positioning extends coverage across large areas without multiplying camera count. The 8MP native resolution delivers forensic-grade detail during live monitoring and incident review. Multi-codec support—H.265, H.264, and MJPEG—optimizes bandwidth and storage based on your network capacity; H.265 cuts storage requirements roughly 40–60% compared to H.264 on 24/7 recording. ONVIF compliance ensures integration with mainstream network video recorders and VMS platforms without vendor lock-in. PoE power simplifies installation—no separate power supply required at the camera location.
Compatibility
The WV-U61300-ZYPR integrates directly with i-PRO network disk recorders including the WJ-NU101, WJ-NU201, WJ-NU300, and WJ-NU301 series (firmware version 2.10 or later). ONVIF Profile S/T standards support ensures interoperability with third-party VMS platforms such as Milestone, Genetec, Axis Camera Station, and other mainstream recording systems that recognize ONVIF-compliant IP cameras. Wall and ceiling mount configurations accommodate new installations or retrofits into existing infrastructure. The camera operates within standard IP surveillance networks using PoE-capable switches and mainstream network architectures.
Installation Notes
Mount the camera on wall or ceiling using the supplied bracket hardware. Verify the mounting surface can support the camera weight and tilt/pan dynamic loads during motor operation. Connect via standard RJ-45 Ethernet to a PoE injector or PoE switch port; confirm your switch provides sufficient power budget for this unit and all downstream devices. Configure the camera IP address, gateway, and DNS via the network admin interface or DHCP, then register it in your VMS platform using ONVIF discovery or manual IP entry.
