Hanwha XNF-8010R vs Hanwha XNF-8010RV: Specification Comparison
The Hanwha XNF-8010R and XNF-8010RV are both 6MP 360° fisheye IP cameras from Hanwha's Wisenet lineup, sharing the same 1/1.8" CMOS sensor, 1.6mm fixed lens, 192° field of view, and 15m IR range. Both target single-camera full-room or open-area coverage deployments. The key differentiator is environmental hardening: one model is rated for indoor use while the other carries IP66 and IK10 certifications for outdoor and vandal-resistant installations. Buyers cross-shopping these two are typically deciding on deployment environment rather than imaging capability.
In This Guide
How do the imaging specs compare?
Both cameras are spec-identical on core imaging: 1/1.8" 6MP CMOS sensor, 2048×2048 resolution, 30fps maximum frame rate, 1.6mm fixed focal length, F1.6 maximum aperture, and a 192° H/V/D angular field of view. Minimum illumination is 0.1 Lux color and 0 Lux with IR active on both models. Wide dynamic range is rated at 120dB on both, supported by BLC, HLC, WDR, and SSDR backlight compensation modes. Digital noise reduction is SSNR V on both units.
IR viewable length is 15m (49.21ft) on both models. Day/Night switching is Auto ICR on both. Neither model has any specified imaging advantage over the other — the sensor stack, lens, IR subsystem, and WDR rating are identical per the provided specifications.
What about installation and environment?
This is where the two models diverge. The XNF-8010R carries no IP or IK rating in its specifications and is designated Indoor with an operating temperature of -10°C to +55°C. The XNF-8010RV is rated IP66 and IK10, designated Outdoor, and has an extended lower operating limit of -40°C to +55°C — a 30°C improvement in cold-weather tolerance. Both models are certified to EN50155 (rail/vibration), but the XNF-8010RV additionally lists IP66 and IK10 in its certification block.
Both cameras accept PoE IEEE 802.3af Class 3 or 12VDC. Maximum power draw differs slightly: the XNF-8010R draws up to 12W via PoE and 11W via 12VDC; the XNF-8010RV draws up to 12.95W via PoE and 12W via 12VDC — both within 802.3af Class 3 budget (15.4W). Physical dimensions differ: the XNF-8010R measures Ø146×54.8mm and weighs 730g, while the XNF-8010RV is slightly taller at Ø146×65.8mm and weighs 785g, reflecting its hardened housing. Both are aluminum construction in Ivory.
Which fits your VMS and analytics better?
Both cameras are specification-identical on VMS integration and analytics. Each supports ONVIF Profile S/G/T, SUNAPI (HTTP API), and the Wisenet open platform. Video compression covers H.265/H.264 (Main/Baseline/High profiles) and MJPEG, with CBR/VBR bitrate control and up to 10 simultaneous streaming profiles. WiseStream II smart codec is available on both with up to 5 manual areas.
Edge analytics are identical across both models: directional detection, motion detection, appear/disappear, enter/exit, loitering, tampering, virtual line, audio detection, and sound classification are all listed for both. Business intelligence functions — people counting, queue management, and heatmap — are present on both. On-board storage is dual microSD/SDHC/SDXC slots supporting up to 512GB total on each. Audio input (selectable mic-in/line-in/built-in mic) and line-level audio output are present on both. Network protocol support, security features (802.1X EAP-TLS/EAP-LEAP, HTTPS, IP filtering), and RAM/Flash (1024MB/256MB) are identical.
Which should you choose: the XNF-8010R or the XNF-8010RV?
Our take: The XNF-8010RV is the stronger choice when the deployment environment is outdoors, subject to weather, or requires resistance to deliberate impact or vandalism. Its IP66 rating confirms dust-tight and high-pressure water-jet resistance absent from the XNF-8010R's specifications, its IK10 rating certifies resistance to 20-joule impacts, and its operating temperature floor extends to -40°C versus -10°C for the indoor model — a 30°C cold-weather advantage. Maximum PoE draw is marginally higher at 12.95W versus 12W, remaining within 802.3af Class 3 limits on both. The XNF-8010R is the appropriate selection for controlled indoor environments — lobbies, atriums, retail floors — where IP66 and IK10 are unnecessary and the 55g weight and 11mm height savings are minor conveniences. All imaging, analytics, VMS integration, codec, and storage capabilities are specification-identical between the two models.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha XNF-8010R | Hanwha XNF-8010RV |
|---|---|---|
| Resolution | 2048×2048 (6MP) | 2048×2048 (6MP) |
| Image Sensor | 1/1.8" 6MP CMOS | 1/1.8" 6MP CMOS |
| Lens / Focal Length | 1.6mm fixed, F1.6, Board-in | 1.6mm fixed, F1.6, Board-in |
| Angular Field of View | H: 192° / V: 192° / D: 192° | H: 192° / V: 192° / D: 192° |
| Min. Illumination | 0.1 Lux color / 0 Lux IR | 0.1 Lux color / 0 Lux IR |
| IR Range | 15m (49.21ft) | 15m (49.21ft) |
| Wide Dynamic Range | 120dB | 120dB |
| Max Frame Rate | 30fps | 30fps |
| Video Compression | H.265, H.264 (M/B/H), MJPEG | H.265, H.264 (M/B/H), MJPEG |
| IP Rating | — | IP66 |
| IK / Impact Rating | — | IK10 |
| Operating Temperature | -10°C to +55°C | -40°C to +55°C |
| Power Input / PoE Class | PoE 802.3af Class 3 / 12VDC | PoE 802.3af Class 3 / 12VDC |
| Power (Max) | PoE 12W / 12VDC 11W | PoE 12.95W / 12VDC 12W |
| Edge Storage | Dual microSD/SDHC/SDXC, 512GB | Dual microSD/SDHC/SDXC, 512GB |
| Dimensions / Weight | Ø146×54.8mm / 730g (1.61 lb) | Ø146×65.8mm / 785g (1.73 lb) |
| Environment Rating | Indoor | Outdoor |
| Warranty | 3-year | 3-year |
Frequently Asked Questions
Which should you choose: the XNF-8010R or the XNF-8010RV?
The XNF-8010RV is the stronger choice when the deployment environment is outdoors, subject to weather, or requires resistance to deliberate impact or vandalism. Its IP66 rating confirms dust-tight and high-pressure water-jet resistance absent from the XNF-8010R's specifications, its IK10 rating certifies resistance to 20-joule impacts, and its operating temperature floor extends to -40°C versus -10°C for the indoor model — a 30°C cold-weather advantage. Maximum PoE draw is marginally higher at 12.95W versus 12W, remaining within 802.3af Class 3 limits on both. The XNF-8010R is the appropriate selection for controlled indoor environments — lobbies, atriums, retail floors — where IP66 and IK10 are unnecessary and the 55g weight and 11mm height savings are minor conveniences. All imaging, analytics, VMS integration, codec, and storage capabilities are specification-identical between the two models.
Is the XNF-8010R or XNF-8010RV better for low light?
Neither model has a specified low-light advantage over the other. Both share an identical minimum illumination of 0.1 Lux color and 0 Lux with IR active, the same F1.6 aperture, and the same 15m IR range. Low-light performance is equivalent per the provided specifications.
Can the XNF-8010R be used outdoors?
The XNF-8010R carries no IP ingress protection rating in its specifications and is designated Indoor with an operating temperature floor of -10°C. The XNF-8010RV is the outdoor-rated variant, certified IP66 and IK10 with a -40°C lower operating limit. For outdoor or exposed installations, the XNF-8010RV is the correct model per the specifications provided.
Do both cameras support the same analytics and VMS integrations?
Yes. Both models are specification-identical on analytics (people counting, queue management, heatmap, loitering, virtual line, directional detection, and more) and VMS integration (ONVIF Profile S/G/T, SUNAPI, Wisenet open platform). Edge storage (dual microSD up to 512GB), audio I/O, codec support, and streaming profiles are also identical across both models.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.