Hanwha PRN-3200B2 vs Kantech ADVER30R5H3G: Specification Comparison
Both the Hanwha PRN-3200B2 and the Kantech ADVER30R5H3G are 32-channel network video recorders positioned for mid-to-large surveillance deployments in a rackmount form factor. The PRN-3200B2 is a dedicated IP NVR running embedded Linux with AI analytics and high-bandwidth H.265 recording. The ADVER30R5H3G is a hybrid NVR supporting both analog and IP cameras on an openSUSE Linux-based VideoEdge OS. This comparison evaluates channel capacity and recording performance, storage and redundancy, and integration and management capabilities as the three most decision-relevant axes for an installer or IT buyer selecting between them.
In This Guide
- Which NVR delivers higher channel capacity and recording performance?
- How do the two units compare on storage capacity and data protection?
- Which unit offers broader integration, protocol support, and management capabilities?
- Which should you choose: the PRN-3200B2 or the ADVER30R5H3G?
- Side-by-Side Specs
- FAQ
Which NVR delivers higher channel capacity and recording performance?
The PRN-3200B2 supports up to 32 IP channels at resolutions from CIF up to 32MP, with a maximum recording bandwidth of 400 Mbps and decoding up to 32MP at 15 fps or 1080p at 480 fps. It supports H.265, H.264, and MJPEG compression. Local display is dual HDMI (4K@30Hz + 1080p@60Hz) with up to 36-division multi-screen layout.
The ADVER30R5H3G is specified as a hybrid unit supporting 32 analog channels plus IP expansion, though the exact IP channel ceiling and maximum per-channel resolution are not stated in the provided specs beyond a listed resolution of VGA (640×480). Compression is listed as H.265 and H.264. No recording bandwidth figure, decoding frame-rate matrix, or display output specification is provided for this model.
For purely IP deployments requiring high-resolution recording (up to 32MP) and defined bandwidth headroom (400 Mbps), the PRN-3200B2 provides fully documented performance figures. The ADVER30R5H3G's hybrid analog+IP architecture is relevant where legacy analog cameras must be retained, but its resolution ceiling per the available specs is listed only at VGA, and no bandwidth figure is available to compare directly.
How do the two units compare on storage capacity and data protection?
The PRN-3200B2 offers 8 SATA HDD slots supporting drives up to 10TB each, for a maximum raw capacity of 80TB. It supports RAID 5 and RAID 6 (single array) plus iSCSI external storage expansion. Playback bandwidth is up to 64 Mbps in RAID mode and 32 Mbps in non-RAID mode. An Automatic Recovery Backup (ARB) feature is also specified.
The ADVER30R5H3G ships with 30TB of onboard RAID-configured storage. The specific RAID level (e.g., RAID 5, RAID 6), number of drive bays, maximum per-drive capacity, and external storage expansion options are not stated in the provided specifications.
The PRN-3200B2's 80TB ceiling and explicit RAID 5/6 plus iSCSI options give installers a documented path for large or long-retention deployments. The ADVER30R5H3G provides 30TB pre-configured, which may suit medium-scale sites where a turnkey storage bundle is preferred, but buyers cannot evaluate expandability or RAID level from the available specs alone.
Which unit offers broader integration, protocol support, and management capabilities?
The PRN-3200B2 supports ONVIF Profile-S, SUNAPI, IPv4/IPv6, RTSP, SNMP, 802.1x, HTTPS, and Hanwha DDNS. Remote management is available via web viewer (Windows 10, macOS 10.13; Chrome, Edge, Safari), Wisenet mobile app (iOS/Android), CGI/SUNAPI, and the SPC-2000 controller. It supports N+1 failover, P2P QR-code setup, and up to 20 multicast remote users. AI search covers human, face, vehicle, and license plate attributes. Maximum concurrent remote users are 10 live unicast and 3 search sessions.
The ADVER30R5H3G runs Kantech's VideoEdge OS on openSUSE Linux and supports RS-232 and IP/Ethernet communication. It is listed as compatible with mid-to-large installations. No VMS software name, ONVIF compliance statement, remote user limits, mobile app support, or protocol list beyond RS-232 and IP/Ethernet is provided in the available specifications.
The PRN-3200B2 provides a fully documented protocol stack and native AI analytics. The ADVER30R5H3G's Kantech VideoEdge platform is an established enterprise VMS ecosystem, but the depth of its integration capabilities cannot be assessed from the specs provided. Buyers committed to the Kantech/Tyco/Johnson Controls ecosystem should consult the full VideoEdge datasheet for VMS feature parity.
Which should you choose: the PRN-3200B2 or the ADVER30R5H3G?
Our take: The PRN-3200B2 is the stronger choice when IP-native, high-resolution recording performance and fully documented storage redundancy are the primary requirements. It records at up to 400 Mbps across 32 channels reaching 32MP, versus the ADVER30R5H3G whose provided specs list a maximum resolution of VGA (640×480) and supply no bandwidth figure. The PRN-3200B2 scales to 80TB across eight SATA slots with RAID 5/6 and iSCSI, while the ADVER30R5H3G ships with a fixed 30TB and no expansion path is stated. It also documents ONVIF Profile-S, 802.1x, SNMP, and AI object search; none of these are confirmed in the ADVER30R5H3G specs. The ADVER30R5H3G warrants consideration where legacy analog cameras must be retained (hybrid design) or where a Kantech/VideoEdge access-control ecosystem is already deployed, but buyers should obtain the full Kantech datasheet before making a final specification decision.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha PRN-3200B2 | Kantech ADVER30R5H3G |
|---|---|---|
| Product Type | IP NVR | Hybrid NVR (Analog + IP) |
| Max IP Channels | 32 | 32 IP (+ 32 analog per spec) |
| Max Recording Resolution | 32MP | VGA (640×480) per provided spec |
| Recording Bandwidth | 400 Mbps | Not specified |
| Video Compression | H.265, H.264, MJPEG | H.265, H.264 |
| HDD Slots | 8 × SATA | Not specified |
| Max Raw Storage | 80TB (8 × 10TB) | 30TB (pre-configured) |
| RAID Support | RAID 5 / RAID 6 | RAID (level not specified) |
| External Storage | iSCSI | Not specified |
| Display Output | 2× HDMI (4K@30Hz + 1080p@60Hz) | Not specified |
| Operating System | Embedded Linux | VideoEdge OS (openSUSE Linux) |
| ONVIF Support | Yes (Profile-S) | Not specified |
| AI Analytics | Human, Face, Vehicle, License Plate | Not specified |
| Remote Users (Live) | 10 unicast / 20 multicast | Not specified |
| Power Supply | 100–240 VAC, 50/60 Hz; max 205W | 400W, 100–240 VAC |
| Form Factor | 2U Rackmount | 3U Rackmount |
Frequently Asked Questions
Which should you choose: the PRN-3200B2 or the ADVER30R5H3G?
The PRN-3200B2 is the stronger choice when IP-native, high-resolution recording performance and fully documented storage redundancy are the primary requirements. It records at up to 400 Mbps across 32 channels reaching 32MP, versus the ADVER30R5H3G whose provided specs list a maximum resolution of VGA (640×480) and supply no bandwidth figure. The PRN-3200B2 scales to 80TB across eight SATA slots with RAID 5/6 and iSCSI, while the ADVER30R5H3G ships with a fixed 30TB and no expansion path is stated. It also documents ONVIF Profile-S, 802.1x, SNMP, and AI object search; none of these are confirmed in the ADVER30R5H3G specs. The ADVER30R5H3G warrants consideration where legacy analog cameras must be retained (hybrid design) or where a Kantech/VideoEdge access-control ecosystem is already deployed, but buyers should obtain the full Kantech datasheet before making a final specification decision.
Is the PRN-3200B2 or ADVER30R5H3G better for larger deployments needing high storage retention?
Based on the provided specs, the PRN-3200B2 supports up to 80TB across eight SATA bays with RAID 5/6 and iSCSI expansion, giving a documented path to large retention budgets. The ADVER30R5H3G is specified with 30TB onboard RAID storage, but no drive-bay count, maximum per-drive size, or expansion option is listed, so its scaling ceiling cannot be confirmed from the available data.
Can the ADVER30R5H3G handle existing analog cameras alongside new IP cameras?
Yes — the ADVER30R5H3G is explicitly specified as a hybrid unit supporting both analog and IP camera types, making it suitable for sites migrating from analog infrastructure. The PRN-3200B2 is an IP-only NVR; it does not list analog camera input support in its specifications.
Which unit has better documented cybersecurity and remote access controls?
The PRN-3200B2 specifies IP address filtering, user access logging, 802.1x authentication, HTTPS, encryption with device certificates (Hanwha Techwin Root CA), and signed firmware. It limits concurrent remote sessions to 10 live unicast and 3 search users. The ADVER30R5H3G's provided specifications do not include cybersecurity feature details or remote session limits; buyers should review the full Kantech VideoEdge documentation for those controls.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.