Hanwha C8012 vs i-PRO U22501-F3L: Specification Comparison
Both the Hanwha QNV-C8012 and the i-PRO WV-U22501-F3L are 5MP fixed-lens IP dome cameras powered by PoE, targeting the mid-tier surveillance market. The Hanwha is rated for outdoor deployment with full IP66/IK10/NEMA4X certification, while the i-PRO is an indoor-rated unit at IP42/IK10. Despite the shared resolution class and dome form factor, the two serve distinct deployment contexts — outdoor perimeter and retail versus protected interior environments — making this a relevant cross-shop for buyers selecting between indoor and covered-outdoor installations.
In This Guide
How do the imaging specs compare?
Both cameras use a 1/2.8-inch CMOS sensor at 5MP and deliver 30fps. The Hanwha QNV-C8012 resolves 2592×1944 pixels with a fixed 2.4mm lens at F2.0, yielding a horizontal field of view of 123°. Its minimum illumination is 0.05 lux in color and 0.005 lux in B/W mode. The i-PRO WV-U22501-F3L resolves 2560×1920 pixels; focal length and aperture are not specified in the provided data. Its minimum illumination is 0.11 lux color and 0 lux in B/W with IR active, supported by a 28m IR LED array.
On WDR, both cameras are rated at 120dB — the Hanwha labels this SSDR/WDR, and the i-PRO identifies it as Super Dynamic. The i-PRO's 28m IR range and 0 lux B/W floor give it a practical night-vision advantage in unlit interior corridors, while the Hanwha's 0.005 lux B/W sensitivity provides passive low-light performance without declaring a specific IR throw distance beyond its 0.5m minimum object distance reference. The i-PRO's focal length and aperture are not provided in the supplied specifications.
What about installation and environment?
The Hanwha QNV-C8012 is rated IP66, IK10, and NEMA4X, making it suitable for outdoor and washdown environments. Its operating temperature range is -40°C to +55°C, covering extreme cold climates. It draws a maximum of 7W via PoE IEEE 802.3af Class 3. Physical dimensions are ø110×77mm and it weighs 522g (1.15 lb). Pan/tilt/rotate adjustment spans 0–350° / -35–70° / 0–355°. Compatible conduit and gangbox accessories (SBD-110GP1, SBP-120HMW, SBV-140BW) are listed separately.
The i-PRO WV-U22501-F3L carries IP42 and IK10 ratings, limiting it to indoor or protected enclosure use — it is not rated for direct weather exposure. Operating temperature is -10°C to +50°C. PoE draw is listed at 13W under IEEE 802.3af, which is notably higher than the Hanwha's 7W maximum and warrants switch port budget consideration. Mounting is specified as ceiling or rack. Physical dimensions and weight are not provided in the supplied specifications.
Which fits your VMS and analytics better?
The Hanwha QNV-C8012 supports ONVIF Profile S, G, T, and M, as well as Hanwha's proprietary SUNAPI. It offers edge analytics including AI-based person and vehicle detection (with vehicle sub-type classification: car, bus, truck, motorcycle, bicycle), virtual line crossing with direction, virtual area detection, people/vehicle counting, queue management, and heatmap generation. Motion detection supports 8 polygonal zones with 8 points each. Privacy masking allows up to 32 four-point quadrangle zones. Edge storage is supported via a single Micro SD/SDHC/SDXC slot up to 256GB. No built-in audio input or microphone is noted in the provided specifications.
The i-PRO WV-U22501-F3L supports ONVIF Profile S, T, and G (Profile M is not listed in the provided data). Its analytics include VMD (video motion detection), SCD (scene change detection), and AI Sound Classification. It includes an audio input and a built-in microphone — audio capability absent from the Hanwha's listed specs. On-board storage specifications are not provided for the i-PRO. A significant differentiator is the i-PRO's NDAA compliance and FIPS 140-3 Level 3 certified SecureElement (EdgeLock SE052F), which is directly relevant to federal, government, and high-security deployments. The Hanwha provides secure boot, signed firmware, firmware encryption, 802.1X authentication, and HTTPS/SRTP, but does not list NDAA or FIPS 140-3 certification in the supplied specifications.
Which should you choose: the C8012 or the U22501-F3L?
Our take: The QNV-C8012 is the stronger choice when the deployment is outdoor, requires extreme-temperature tolerance, or prioritizes rich AI video analytics with edge storage. It carries IP66/NEMA4X weatherproofing versus the WV-U22501-F3L's indoor-only IP42, operates across -40°C to +55°C versus -10°C to +50°C, consumes a maximum of 7W versus 13W PoE, and delivers a broader ONVIF profile set (S/G/T/M) alongside AI-driven heatmap, queue, and vehicle sub-classification analytics plus up to 256GB edge storage. The WV-U22501-F3L is the stronger choice for federally regulated or high-security indoor environments: its FIPS 140-3 Level 3 certified SecureElement and NDAA compliance are specifications the Hanwha does not list, and its built-in microphone with AI Sound Classification adds an audio detection layer the Hanwha lacks. Select the i-PRO where compliance mandates and audio intelligence matter more than outdoor hardening or advanced video analytics breadth.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha C8012 | i-PRO U22501-F3L |
|---|---|---|
| Resolution | 2592×1944 (5MP) | 2560×1920 (5MP) |
| Image Sensor | 1/2.8" CMOS | 1/2.8" CMOS |
| Focal Length | 2.4mm fixed | — |
| Max Aperture | F2.0 | — |
| Horizontal FOV | 123° | — |
| Min Illumination (Color) | 0.05 lux | 0.11 lux (30IRE) |
| Min Illumination (B/W) | 0.005 lux | 0 lux (IR on) |
| IR Range | — | 28m (92 ft) |
| WDR | 120dB (SSDR/WDR) | 120dB (Super Dynamic) |
| Max Frame Rate | 30fps @ 5MP | 30fps / 25fps |
| Video Compression | H.265, H.264, MJPEG | H.265, H.264, MJPEG |
| IP Rating | IP66 | IP42 |
| IK / Impact Rating | IK10 | IK10 |
| Operating Temperature | -40°C to +55°C | -10°C to +50°C |
| Power Input / PoE | PoE 802.3af, Class 3, max 7W | PoE 802.3af, 13W |
| ONVIF Profiles | S, G, T, M | S, T, G |
| Edge Storage | Micro SD/SDHC/SDXC up to 256GB | — |
| Audio | — | Audio input; built-in microphone |
| AI Analytics | Person/vehicle detection, heatmap, counting, queue management | VMD, SCD, AI Sound Classification |
| Certifications | IP66, IK10, NEMA4X, UL 62368-1, FCC, CE/UKCA | NDAA, FIPS 140-3 Level 3, IK10 |
| Outdoor Rated | Yes (IP66, NEMA4X) | No (IP42, indoor) |
| Warranty | 3-year | — |
| Weight | 522g (1.15 lb) | — |
Frequently Asked Questions
Which should you choose: the C8012 or the U22501-F3L?
The QNV-C8012 is the stronger choice when the deployment is outdoor, requires extreme-temperature tolerance, or prioritizes rich AI video analytics with edge storage. It carries IP66/NEMA4X weatherproofing versus the WV-U22501-F3L's indoor-only IP42, operates across -40°C to +55°C versus -10°C to +50°C, consumes a maximum of 7W versus 13W PoE, and delivers a broader ONVIF profile set (S/G/T/M) alongside AI-driven heatmap, queue, and vehicle sub-classification analytics plus up to 256GB edge storage. The WV-U22501-F3L is the stronger choice for federally regulated or high-security indoor environments: its FIPS 140-3 Level 3 certified SecureElement and NDAA compliance are specifications the Hanwha does not list, and its built-in microphone with AI Sound Classification adds an audio detection layer the Hanwha lacks. Select the i-PRO where compliance mandates and audio intelligence matter more than outdoor hardening or advanced video analytics breadth.
Is the QNV-C8012 or WV-U22501-F3L better for low-light performance?
The i-PRO WV-U22501-F3L reaches 0 lux in B/W mode when its 28m IR LEDs are active, effectively seeing in complete darkness at ranges up to 28m. The Hanwha QNV-C8012 achieves 0.005 lux B/W passively, without a published IR throw distance in the provided specs beyond a 0.5m minimum object distance reference. If IR-illuminated night coverage at distance is the priority, the i-PRO's specified 28m IR range is the concrete advantage. For passive low-light sensitivity, the Hanwha's 0.005 lux figure is better than the i-PRO's 0.11 lux color floor.
Can the QNV-C8012 be used outdoors and the WV-U22501-F3L cannot?
Based on the provided specifications, yes. The Hanwha QNV-C8012 is rated IP66, IK10, and NEMA4X, confirming resistance to dust ingress and high-pressure water jets, suitable for outdoor and washdown applications. The i-PRO WV-U22501-F3L is rated IP42, which protects against solid objects over 1mm and water dripping at up to 15° from vertical — this is an indoor rating and not appropriate for direct outdoor exposure without an additional weatherproof enclosure.
Which camera is required for NDAA-compliant or government installations?
Based on the provided specifications, the i-PRO WV-U22501-F3L lists NDAA compliance and FIPS 140-3 Level 3 certification via an EdgeLock SE052F SecureElement. These certifications are not listed for the Hanwha QNV-C8012 in the supplied specifications. Buyers subject to federal procurement rules, NDAA Section 889 restrictions, or agency cybersecurity requirements should verify compliance documentation directly with each manufacturer, but only the i-PRO carries those certifications as stated in the provided data.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.