Geovision TBLP880-0010 vs Pelco IMF82-1I: Specification Comparison
Both the Geovision TBLP880-0010 and the Pelco IMF82-1I are 8MP fixed IP cameras designed to replace multiple conventional cameras in wide-area surveillance deployments. The Geovision is a panoramic bullet delivering a 180° field of view, while the Pelco is a fisheye offering selectable 180° or 360° coverage. This comparison examines how their imaging characteristics, installation requirements, and platform integration capabilities stack up for integrators choosing between the two.
In This Guide
How do the imaging specs compare?
Both cameras share an 8MP resolution class, but their optical approaches differ. The Geovision TBLP880-0010 uses a 1.68 mm fixed lens at F/2.0 on a 1/2.7-inch sensor, delivering a 180° panoramic view with built-in IR illumination rated at approximately 20–30 m range. It supports Day/Night switching and WDR, though a minimum illumination lux figure is not provided in the available spec data. The Pelco IMF82-1I uses a 2.7 mm lens at F/2.5 (a separate data field also cites 1.4 mm focal length—these are contradictory; neither can be confirmed with certainty from the provided specs), producing a 3264 × 2448 image at 12.5 fps with a stated minimum illumination of 0.10 lux. The IMF82-1I also carries WDR rated up to 83 dB.
The IMF82-1I's 360° fisheye mode and its cited low-light floor of 0.10 lux are meaningful differentiators. However, the IMF82-1I spec sheet explicitly states no integrated IR illumination, meaning night performance relies entirely on ambient or supplemental lighting. The TBLP880-0010's onboard IR extends usable range in darkness to roughly 20–30 m without auxiliary fixtures. The TBLP880-0010 encodes in H.265, yielding approximately 50% bandwidth savings versus H.264. The IMF82-1I's primary listed codec is H.264, though an additional spec field lists H.265 as well—this inconsistency cannot be resolved from the provided data; buyers should confirm with Pelco.
What about installation and environment?
The Geovision TBLP880-0010 is a bullet-form outdoor camera with no IP or IK rating stated in the provided specifications. It draws power via 802.3af PoE at approximately 12–13 W and ships in a panoramic bullet housing measuring 137 × 233 × 160 mm and weighing 1.65 kg. Mounting options include wall, pole, corner, and power box. No operating temperature range is provided in the available data.
The Pelco IMF82-1I is an indoor-rated fisheye camera carrying IP52 (protected against limited dust and water spray) and IK10 (protected against 20-joule impacts) certifications. It requires PoE+ (802.3at, Class 3) power, which demands a compatible PoE+ switch or injector rather than a standard 802.3af port. It operates from −10 °C to +60 °C (an additional spec field cites −10 °C to +70 °C—buyers should verify with Pelco). Dimensions are 6 × 6 × 2.4 inches. Mounting options include wall, ceiling, pole, pendant, and corner. The IMF82-1I ships white and is explicitly designated as indoor; it is not rated for exposed outdoor installation.
Which fits your VMS and analytics better?
Both cameras declare ONVIF Profile S compliance, ensuring baseline VMS interoperability. The Pelco IMF82-1I adds ONVIF Profile T and Profile G, broadening compatibility with VMS platforms that leverage HTTPS streaming (Profile T) and on-camera recording management (Profile G). The IMF82-1I also supports microSD edge storage, providing local recording resilience independent of the VMS. No on-board storage capability is specified for the TBLP880-0010.
On analytics, the Geovision TBLP880-0010 lists AI Deep-Learning analytics, though specific behavior count or types are not enumerated in the provided spec data. The Pelco IMF82-1I specifies eight named on-camera analytic behaviors under Pelco Smart Analytics, including object detection and loitering, with the caveat that analytics are disabled in high-frame-rate and dewarped video modes—an operational constraint integrators must plan for. The IMF82-1I also supports microphone input; no audio capability is stated for the TBLP880-0010. The IMF82-1I carries certifications including UL, cUL, CE, RoHS, RCM, EAC, UKCA, KC, BIS, and NOM. No certifications are listed for the TBLP880-0010. Pelco includes a 5-year warranty; no warranty term is provided for the Geovision unit.
Which should you choose: the TBLP880-0010 or the IMF82-1I?
Our take: The TBLP880-0010 is the stronger choice when the deployment is outdoors, IR night coverage is required without auxiliary fixtures, and H.265 bandwidth efficiency is a priority on constrained uplinks. Its onboard IR reaches approximately 20–30 m, it runs on standard 802.3af PoE (12–13 W), and H.265 cuts storage and bandwidth roughly in half versus the IMF82-1I's primary H.264 codec. The IMF82-1I is the stronger choice for indoor ceiling-mount environments where 360° dewarped views, eight named on-camera analytics behaviors, and edge storage via microSD are required—and where a PoE+ switch is already in place. Its 0.10 lux low-light rating and IK10 impact resistance add value in demanding indoor spaces. Neither camera should be selected solely on this comparison without confirming the IMF82-1I's contradictory lens and codec fields directly with Pelco, and verifying the TBLP880-0010's missing IP rating and operating temperature range with Geovision.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision TBLP880-0010 | Pelco IMF82-1I |
|---|---|---|
| Resolution | 8 MP | 8 MP (3264 × 2448) |
| Form Factor | Panoramic Bullet | Fisheye |
| Field of View | 180° | 180° / 360° |
| Image Sensor Size | 1/2.7 inch | — |
| Lens / Focal Length | 1.68 mm, F/2.0 | 2.7 mm, F/2.5 (1.4 mm also cited — verify with Pelco) |
| Min Illumination | — | 0.10 lux |
| IR Illumination | Yes, ~20–30 m | None |
| WDR | Yes | Yes, up to 83 dB |
| Max Frame Rate | — | 12.5 fps at full resolution |
| Video Compression | H.265 | H.264 (H.265 also cited — verify with Pelco) |
| Power Input / PoE | 802.3af, ~12–13 W | 802.3at PoE+ (Class 3) |
| IP Rating | — | IP52 |
| IK / Impact Rating | — | IK10 |
| Operating Temperature | — | -10 °C to +60 °C (alt. field: -10 °C to +70 °C — verify with Pelco) |
| ONVIF Profiles | Profile S | Profile S, Profile T, Profile G |
| Edge Storage | — | microSD |
| Audio | — | Microphone supported |
| On-Camera Analytics | AI Deep-Learning (behaviors not enumerated) | Pelco Smart Analytics, 8 named behaviors |
| Environment Rating | — | Indoor |
| Dimensions | 137 × 233 × 160 mm (5.4" × 9.17" × 6.3") | 6" × 6" × 2.4" |
| Weight | 1.65 kg (3.64 lb) | — |
| Warranty | — | 5 years |
Frequently Asked Questions
Which should you choose: the TBLP880-0010 or the IMF82-1I?
The TBLP880-0010 is the stronger choice when the deployment is outdoors, IR night coverage is required without auxiliary fixtures, and H.265 bandwidth efficiency is a priority on constrained uplinks. Its onboard IR reaches approximately 20–30 m, it runs on standard 802.3af PoE (12–13 W), and H.265 cuts storage and bandwidth roughly in half versus the IMF82-1I's primary H.264 codec. The IMF82-1I is the stronger choice for indoor ceiling-mount environments where 360° dewarped views, eight named on-camera analytics behaviors, and edge storage via microSD are required—and where a PoE+ switch is already in place. Its 0.10 lux low-light rating and IK10 impact resistance add value in demanding indoor spaces. Neither camera should be selected solely on this comparison without confirming the IMF82-1I's contradictory lens and codec fields directly with Pelco, and verifying the TBLP880-0010's missing IP rating and operating temperature range with Geovision.
Is the TBLP880-0010 or IMF82-1I better for low-light performance?
The IMF82-1I specifies a minimum illumination of 0.10 lux, which is a measurable low-light floor. The TBLP880-0010 does not state a lux rating in the available specs, but it includes onboard IR illumination effective to approximately 20–30 m, enabling usable images in complete darkness without any ambient light. The IMF82-1I has no integrated IR, so it depends on ambient or supplemental lighting once the scene goes dark. For true zero-lux night coverage, the TBLP880-0010 has a clear structural advantage.
Can I power either camera from a standard 802.3af PoE switch?
The TBLP880-0010 runs on 802.3af PoE at approximately 12–13 W and is compatible with any standard PoE switch. The IMF82-1I requires PoE+ (802.3at, Class 3), which delivers up to 30 W. A standard 802.3af-only port will not reliably power the IMF82-1I; a PoE+ capable switch or injector is required for that camera.
Which camera offers better VMS and integration flexibility?
The IMF82-1I supports ONVIF Profile S, Profile T, and Profile G, covers a broader range of VMS integration scenarios including HTTPS streaming and on-camera recording management, and adds microSD edge storage. The TBLP880-0010 is certified for ONVIF Profile S only and lists no on-board storage. If your VMS or project requires Profile T/G compliance or local storage redundancy, the IMF82-1I has the broader integration feature set.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.