Geovision ABL470W-0010 vs Geovision ABL471W-0010: Specification Comparison
The Geovision ABL470W-0010 and ABL471W-0010 are both 4MP fixed-lens H.265 IR bullet cameras from Geovision, positioned for perimeter and general IP surveillance installations. They share the same resolution class, form factor, and ONVIF Profile S compliance, making them genuine cross-shop candidates. This comparison examines where the two models diverge across imaging performance, installation requirements, and VMS/analytics integration to help integrators and IT buyers select the right unit for their deployment scenario.
In This Guide
How do the imaging specs compare?
Both cameras deliver 4MP resolution with H.265 compression and IR night vision. The ABL470W-0010 uses a 4mm fixed lens, while the ABL471W-0010 uses a 4.3mm fixed lens — the slightly longer focal length on the ABL471W-0010 provides a narrower field of view and marginally more reach at distance for identification tasks. IR wavelength is specified only for the ABL471W-0010 at 850nm; the ABL470W-0010's IR specification does not include a wavelength figure in the provided data.
On wide dynamic range, the ABL471W-0010 is specified with 'WDR Pro,' while the ABL470W-0010 lists 'WDR' without a Pro or dB qualifier. The ABL470W-0010's low-light spec is described as 'low-lux,' whereas the ABL471W-0010's IR low-light entry does not include a lux floor figure in the provided specs. The ABL470W-0010 also lists dual-codec support (H.265; H.264) for the ABL471W-0010 versus H.265 only for the ABL470W-0010, which may affect legacy NVR compatibility. Minimum illumination figures, sensor size, and maximum frame rate are not specified for either model in the provided data.
What about installation and environment?
Power delivery differs between the two models: the ABL471W-0010 explicitly specifies PoE (Power over Ethernet) and Ethernet connectivity, simplifying single-cable installation. The ABL470W-0010 does not list a power input method in the provided specifications, so installers should verify power requirements before deployment. IP/IK ratings, operating temperature range, dimensions, and weight are not provided in the spec data for either model.
On mounting, the ABL470W-0010 supports both wall and pole mounting per its spec data. The ABL471W-0010 lists wall mounting only. Both are bullet form-factor cameras. The ABL470W-0010's cable category is listed as 'IPPTZCam' while the ABL471W-0010 is listed as 'IPCAM' — this may reflect internal product-line classification differences and should be confirmed with Geovision for cabling or channel licensing implications.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile S, enabling integration with Geovision's own VMS and compliant third-party platforms. Neither model lists edge analytics, on-board SD card storage, or audio (microphone/speaker) capability in the provided specifications, so those features cannot be confirmed or compared. The ABL471W-0010's dual H.265/H.264 codec support gives it a practical advantage in environments where legacy NVR hardware or VMS software does not support H.265 decoding. The ABL470W-0010's H.265-only compression may require a VMS upgrade if deployed alongside older infrastructure.
Which should you choose: the ABL470W-0010 or the ABL471W-0010?
Our take: The ABL471W-0010 is the stronger choice when PoE infrastructure is in place, legacy codec compatibility matters, or enhanced WDR performance is a priority. Concretely: (1) the ABL471W-0010 specifies PoE power delivery while the ABL470W-0010's power input is unspecified in the provided data; (2) the ABL471W-0010 carries a 'WDR Pro' rating versus plain 'WDR' on the ABL470W-0010, suggesting a higher dynamic range ceiling for challenging lighting conditions; (3) the ABL471W-0010 supports both H.265 and H.264 compression, whereas the ABL470W-0010 lists H.265 only, which may limit compatibility with older NVRs. The ABL470W-0010's pole-mount support gives it an edge for street or perimeter pole deployments where the ABL471W-0010 lists only wall mounting. Neither model's IP rating, operating temperature, or minimum illumination figures are present in the provided specs, so environmental suitability must be confirmed via Geovision datasheets before final selection.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision ABL470W-0010 | Geovision ABL471W-0010 |
|---|---|---|
| Resolution | 4 MP | 4 MP |
| Camera Type | Fixed Bullet | Fixed Bullet |
| Lens / Focal Length | 4mm fixed | 4.3mm fixed |
| Video Compression | H.265 | H.265; H.264 |
| WDR | WDR | WDR Pro |
| IR / Night Vision | IR; low-lux | IR; 850nm |
| IR Wavelength | — | 850nm |
| ONVIF | Profile S | Profile S |
| Power Input | — | PoE |
| Connectivity | — | Ethernet |
| Mount Type | Wall; Pole | Wall |
| Form Factor | Bullet | Bullet |
Frequently Asked Questions
Which should you choose: the ABL470W-0010 or the ABL471W-0010?
The ABL471W-0010 is the stronger choice when PoE infrastructure is in place, legacy codec compatibility matters, or enhanced WDR performance is a priority. Concretely: (1) the ABL471W-0010 specifies PoE power delivery while the ABL470W-0010's power input is unspecified in the provided data; (2) the ABL471W-0010 carries a 'WDR Pro' rating versus plain 'WDR' on the ABL470W-0010, suggesting a higher dynamic range ceiling for challenging lighting conditions; (3) the ABL471W-0010 supports both H.265 and H.264 compression, whereas the ABL470W-0010 lists H.265 only, which may limit compatibility with older NVRs. The ABL470W-0010's pole-mount support gives it an edge for street or perimeter pole deployments where the ABL471W-0010 lists only wall mounting. Neither model's IP rating, operating temperature, or minimum illumination figures are present in the provided specs, so environmental suitability must be confirmed via Geovision datasheets before final selection.
Is the ABL470W-0010 or ABL471W-0010 better for low-light performance?
Based on the provided specifications, the ABL471W-0010 identifies its IR illuminator wavelength at 850nm, while the ABL470W-0010 is described as 'low-lux' without a wavelength figure. Neither model provides a minimum illumination (lux) number in the available data, so a definitive low-light comparison cannot be made from specs alone. Consult Geovision's official datasheets for lux floor and IR range figures before specifying either unit for low-light-critical applications.
Can the ABL470W-0010 or ABL471W-0010 work with my existing H.264-only NVR?
The ABL471W-0010 supports both H.265 and H.264 compression, making it compatible with NVRs that do not support H.265 decoding. The ABL470W-0010 lists H.265 only in the provided specifications, so it may not be compatible with legacy H.264-only recorders without a firmware update or VMS software that can handle transcoding. If your NVR is H.264-only, the ABL471W-0010 is the safer choice.
Does either camera support pole mounting?
Yes — the ABL470W-0010 lists both wall and pole mounting in its specifications. The ABL471W-0010 lists wall mounting only. If pole mounting is required for your installation, the ABL470W-0010 is the confirmed option based on the available spec data.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.