ACTi A818 vs Hanwha C8083RV: Specification Comparison
Both the ACTi A818 and Hanwha XND-C8083RV are 6MP varifocal dome network cameras positioned for security deployments where optical zoom and AI-assisted analytics matter. The A818 is rated for harsh outdoor environments, while the C8083RV targets indoor vandal-resistant installations. Buyers evaluating these two will weigh outdoor ruggedness and long IR throw against a larger sensor, AI-object detection depth, and on-board edge storage — all at similar PoE Class 3 power budgets.
In This Guide
How do the imaging specs compare?
The ACTi A818 uses a 1/2.7-inch sensor delivering 6MP at up to 30fps (1920×1080) or 25fps at 2688×1520, paired with a 2.7–13.5mm 5x optical zoom lens. Its IR illuminators reach 85m at 1.0 lux, minimum illumination is 0.01 lux color and 0 lux (IR on), and it claims 150dB Extreme WDR. The Hanwha XND-C8083RV uses a larger 1/1.8-inch progressive CMOS sensor at 3328×1872 (30fps), paired with a shorter 4.4–9.3mm 2.1x motorized varifocal lens. Its minimum illumination is 0.04 lux color / 0 lux IR, WDR is rated at 120dB (extremeWDR), and IR reach is 40m.
On sensor size the C8083RV holds the advantage with a 1/1.8-inch chip versus the A818's 1/2.7-inch, which generally benefits low-light signal-to-noise before IR is needed. The A818 counters with a 5x optical zoom range (2.7–13.5mm vs 2.1x on the C8083RV), a significantly longer IR throw of 85m versus 40m, and a higher WDR rating of 150dB versus 120dB — relevant in high-contrast outdoor scenes. The C8083RV includes built-in digital image stabilization via gyro sensor and a P-iris lens with F1.3 maximum aperture at wide end; aperture data is not specified for the A818.
What about installation and environment?
The ACTi A818 carries IP68 and IK10 ratings with NEMA 4X, meaning it withstands continuous submersion, high-pressure washdowns, and up to 50-joule impacts — certifications that make it suitable for demanding outdoor and industrial sites. Its operating temperature range is -30°C to 60°C, covering extreme cold climates. Mounting options include wall, pole, corner, and rack via accessories, and it connects via a 2m pigtail RJ-45 cable. Power is PoE+ (802.3at) Class 3 at 13W max, with DC 12V as an alternative. Weight is 1046g.
The Hanwha XND-C8083RV is rated IP52 and IK08, protecting against limited dust ingress, low-angle water spray, and up to 5-joule impacts — appropriate for indoor vandal-resistant use but not outdoor exposure. Its operating range is -10°C to 50°C, a meaningfully narrower window. Power input is PoE IEEE 802.3af Class 3 at 12.95W max, with DC 12V also supported. The camera includes a Micro USB Type B port for on-site installation alignment at 1280×720 — a practical installer convenience not listed for the A818. It weighs 1350g and ships in RAL9003 white aluminum and PC housing.
Which fits your VMS and analytics better?
Both cameras support ONVIF and H.265/H.264/MJPEG compression. The ACTi A818 is ONVIF Profile S, G, T, and M compliant. Its analytics include VMD, People Counting, Smoke Detection, Face Detection, and Tampering Detection. It provides 2-way audio with mic-in, line-in, and line-out. On-board edge storage is not specified in the provided specs. GPS position is available via manual setting.
The Hanwha XND-C8083RV supports ONVIF Profile S, G, T, plus SUNAPI (HTTP API) and the Wisenet open platform. Its AI analytics engine delivers object detection (person, face, vehicle classes, license plate), IVA with virtual line/area/loitering/intrusion/direction rules, and business intelligence including people counting, queue management, and heatmap — a broader AI suite than the A818's spec-listed analytics. The C8083RV includes 2 configurable alarm I/O ports, microSD/SDHC/SDXC edge storage up to 512GB (not listed for the A818), 4GB RAM / 512MB Flash, and WiseStream II/III smart codec for bandwidth optimization. Audio input is selectable mic/line-in; line-out max 1Vrms. Network security includes 802.1X EAP authentication and device certificate pre-installed.
Which should you choose: the A818 or the C8083RV?
Our take: The A818 is the stronger choice when the deployment is outdoor, in harsh or cold environments, or requires long-range IR coverage: it holds IP68/IK10/NEMA 4X versus the C8083RV's IP52/IK08, operates from -30°C versus -10°C, delivers 85m IR throw versus 40m, and achieves 150dB WDR versus 120dB. The C8083RV is the stronger choice for indoor AI-intensive applications: its larger 1/1.8-inch sensor, deeper AI object detection (vehicle classes, license plates, IVA rules, queue management, heatmap), 512GB on-board edge storage, digital image stabilization via gyro, and built-in 2 alarm I/O ports address smart-building and retail analytics requirements the A818's spec sheet does not cover. Choose the A818 for outdoor ruggedness and zoom reach; choose the C8083RV for AI depth and edge storage on sheltered indoor or covered-outdoor sites.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | ACTi A818 | Hanwha C8083RV |
|---|---|---|
| Resolution | 6MP (2688×1520 max) | 6MP (3328×1872) |
| Image Sensor | 1/2.7-inch | 1/1.8-inch progressive CMOS |
| Lens / Focal Length | 2.7–13.5mm, 5x optical zoom | 4.4–9.3mm, 2.1x motorized varifocal |
| Max Aperture | — | F1.3 (Wide) / F2.15 (Tele) |
| Min. Illumination | 0.01 lux color; 0 lux (IR on) | 0.04 lux color; 0 lux (IR on) |
| IR Range | 85m @ 1.0 lux (850nm) | 40m (WiseIR) |
| WDR | Extreme WDR 150dB | extremeWDR 120dB |
| Max Frame Rate | 30fps @ 1920×1080; 25fps @ 2688×1520 | 30fps @ 3328×1872 |
| Video Compression | H.265; H.264; MJPEG | H.265; H.264; MJPEG |
| IP Rating | IP68 / NEMA 4X | IP52 |
| IK / Impact Rating | IK10 | IK08 |
| Operating Temperature | -30°C to 60°C | -10°C to 50°C |
| Power Input / PoE Class | PoE+ 802.3at Class 3 / DC 12V; 13W max | PoE 802.3af Class 3 / DC 12V; 12.95W max |
| Edge Storage | — | Micro SD/SDHC/SDXC up to 512GB |
| Alarm I/O | — | 2 configurable I/O ports |
| Audio | 2-way; mic-in; line-in; line-out | Mic-in / line-in selectable; line-out 1Vrms |
| ONVIF Profiles | S, G, T, M | S, G, T |
| Digital Image Stabilization | — | Yes (built-in gyro sensor) |
| Weight | 1046g (2.31 lb) | 1350g (2.98 lb) |
| Warranty | 3 years | 3 years |
Frequently Asked Questions
Which should you choose: the A818 or the C8083RV?
The A818 is the stronger choice when the deployment is outdoor, in harsh or cold environments, or requires long-range IR coverage: it holds IP68/IK10/NEMA 4X versus the C8083RV's IP52/IK08, operates from -30°C versus -10°C, delivers 85m IR throw versus 40m, and achieves 150dB WDR versus 120dB. The C8083RV is the stronger choice for indoor AI-intensive applications: its larger 1/1.8-inch sensor, deeper AI object detection (vehicle classes, license plates, IVA rules, queue management, heatmap), 512GB on-board edge storage, digital image stabilization via gyro, and built-in 2 alarm I/O ports address smart-building and retail analytics requirements the A818's spec sheet does not cover. Choose the A818 for outdoor ruggedness and zoom reach; choose the C8083RV for AI depth and edge storage on sheltered indoor or covered-outdoor sites.
Is the A818 or C8083RV better for low light?
The A818 reaches 0.01 lux color and 0 lux (IR on) with an 85m IR throw, while the C8083RV is rated 0.04 lux color and 0 lux (IR on) with a 40m IR throw. For long-range dark environments the A818's IR reach is a clear advantage. However, the C8083RV's larger 1/1.8-inch sensor (versus the A818's 1/2.7-inch) generally captures more light per pixel before IR activates, which can benefit image quality in dim but not fully dark scenes.
Can either camera be used outdoors?
The ACTi A818 is rated IP68 and IK10 with NEMA 4X and operates down to -30°C, making it suitable for exposed outdoor and industrial environments including washdown areas. The Hanwha XND-C8083RV is rated IP52 and IK08 with an operating range starting at -10°C; its spec sheet lists it as an indoor environment camera. It is not rated for continuous water exposure or the impact resistance required in demanding outdoor installations.
Which camera has better AI analytics?
Based on the provided specifications, the Hanwha XND-C8083RV offers a broader AI analytics suite: AI-based object detection covering persons, faces, vehicles (car, bus, truck, motorcycle, bicycle), and license plates, plus IVA rules (virtual line, area, loitering, intrusion, direction, appear/disappear), people counting, queue management, and heatmap. The ACTi A818's listed analytics include VMD, People Counting, Smoke Detection, Face Detection, and Tampering Detection. The C8083RV's analytics are AI-engine-based and more granular; the A818's analytics methodology is not further described in the provided specs.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.