Pole Mounts & Brackets for IP Cameras | Commercial-Grade

Plan Your Deployment

Pole diameter and mounting compatibility
Wind load and structural stability considerations
Outdoor environmental durability requirements
Cable routing and weatherproofing needs
Service access and future upgrade planning

Showing Results for Pole Mounts & Brackets

Compare

Out of stock
Axis

SKU: 5503-971

Axis T91A27 Pole Mount Bracket 10-Pack - 5503-971

10-pack pole mount brackets for IP cameras with 1/4"-20 tripod threading
- Mount 10 cameras across multiple locations with universal tripod-threaded compatibility
- Indoor/outdoor rated construction handles pole installations in diverse environments
- Bulk packaging reduces per-unit cost for large-scale surveillance deployments
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01446-001

Axis T91B57 Pole Mount Urban Grey - 01446-001

Aluminum pole mount for 4"–16" diameters with stainless steel straps
- Fits poles 100–410mm without adapters; single mount covers most installations
- 1450mm stainless steel straps resist corrosion in coastal and industrial sites
- TX30 interface integrates with Axis T91G61, T91H61, and T98A cabinet series
In stock · Ships same business day

$174.22 $168.99 Save $5.23

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-691

Axis T91F67 Marine-Grade Pole Mount Bracket - 5506-691

Marine-grade SS316L pole mount for Q35-SLVE cameras, 4"–16" poles
- SS316L stainless steel construction resists corrosion in coastal and high-moisture environments
- Accommodates pole diameters from 100–410mm with 1,450mm strap for flexible positioning
- TX30 screw interface allows tool-free installation and adjustment on-site
Special Order · Ships in 2-3 weeks

$174.22 $168.99 Save $5.23

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01149-001

Axis T91M47 Pole Mount Bracket - 01149-001

Pole mount for outdoor PoE midspans and network switches
- Mounts outdoor switches and midspans to poles without wall penetration
- 802.3af PoE powered—signal and power via single Ethernet run
- Outdoor-rated construction for exposed environments and weather exposure
In stock · Ships same business day

$65.39 $64.99 Save $0.40

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5901-341

Axis T94N01G Stainless Steel Pole Mount - 5901-341

Stainless steel pole mount for PTZ cameras, fits 60–400mm poles
- IK10 impact rating withstands 20 joules of directed force without damage
- Three stainless steel straps span 2.4–15.7 inch pole diameters without adapters
- Sealing gaskets at cable entry block moisture and insects in outdoor sites
In stock · Ships same business day

$233.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-551

Axis T94Y01G Pole Mount - 5801-551

Pole mount for 25 kg cameras in indoor/outdoor surveillance setups
- 25 kg load capacity handles mid-size Axis cameras with stability
- Powder-coated aluminum resists corrosion and UV for outdoor durability
- Back-routed cable management keeps wiring clean and protected
Special Order · Ships in 2-3 weeks

$211.33 $204.99 Save $6.34

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01951-001

Axis TD9301 Outdoor Midspan Pole Mount - 01951-001

Pole mount for outdoor 30W midspan power distribution
- IP65-rated housing withstands outdoor weather and moisture exposure
- Pole mount form factor for flexible elevated installation in surveillance
- Compatible with AXIS 30W Outdoor Midspan for PoE camera networks
In stock · Ships same business day

$69.06 $66.99 Save $2.07

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02961-001

Axis TP3301-E Pole Mount Bracket 1.5" - 02961-001

Pole mount for Axis cameras, 25 kg capacity, fits 65–165 mm poles
- Secures up to 25 kg on poles 2.5–6.5 in diameter with clamp bracket
- 1.5" NPS threading compatible with standard Axis pendant kits
- Powder-coated aluminum construction rated for indoor and outdoor use
In stock · Ships same business day

$184.53 $178.99 Save $5.54

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02343-001

Axis TQ1301-E Pole Mount 50-150mm - 02343-001

SS 316L pole mount for Axis explosion-protected cameras in saltwater/chemical environments
- Electropolished stainless steel resists corrosion in marine and heavy industrial settings
- Fits poles 50–150 mm diameter with 150 kg static vertical load capacity
- Engineered for Axis TQ1001-E explosion-protected camera installation
In stock · Ships same business day

$1,183.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01471-001

Axis TX30 Steel Straps 1450mm Pair - 01471-001

Steel straps for large-diameter poles up to 1550mm circumference
- 1450mm length per strap accommodates oversized poles in industrial yards
- High-grade corrosion-resistant steel resists rust in coastal and humid sites
- Pair of two straps delivers balanced mounting on single pole or structure
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-E-BFP00CL

Hanwha HT-E-BFP00CL Pole Adaptor for Explosion-Proof Cameras

Stainless steel pole mount for Hanwha explosion-proof cameras
- Stainless steel construction resists corrosion in hazardous environments
- Pole adaptor supports flexible installation on varying diameter poles
- Purpose-built for ATEX-regulated indoor and outdoor industrial sites
Special Order · Ships in 2-3 weeks

$1,550.00 $1,039.99 Save $510.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: HT-SPMA-SD

Hanwha HT-SPMA-SD Pole Mount for Explosion Proof

Pole mount for explosion-proof cameras up to 6-inch diameter
- Mounts HT-SD-WM and HT-F1XX-WM cameras on standard poles
- Supports poles up to 6 inches in diameter for flexible positioning
- White construction designed for hazardous location installations
Special Order · Ships in 2-3 weeks

$2,260.00 $1,515.99 Save $744.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-140PMB

Hanwha SBD-140PMB White Pole Mount Base

SUS304 stainless steel pole mount base for outdoor Hanwha cameras
- SUS304 stainless steel with white powder coat resists salt spray and corrosion
- Compact 121 x 70 mm footprint minimizes visual impact on pole installations
- TR20 Torx screw interface compatible with QNV, QND, QNF, QNE, LND, ANE series
In stock · Ships same business day

$70.00 $46.99 Save $23.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-140PMW

Hanwha SBD-140PMW Pole Mount Base White

Aluminum pole mount base for outdoor IP cameras, white finish
- Aluminum core with plastic cap resists corrosion in coastal/harsh environments
- Compact ø147.1mm footprint minimizes wind load and visual impact on poles
- Dual TR20/TR30 screw threads fit Hanwha cameras and steel mounting straps
In stock · Ships same business day

$49.00 $32.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBD-180PMW

Hanwha SBD-180PMW Pole Mount Base White

Aluminum pole mount base for Hanwha Wisenet X/P cameras, outdoor-rated
- Aluminum core with weather-resistant plastic cap resists corrosion in coastal/humid environments
- Lightweight 370g design reduces structural load on existing pole installations
- Compact ø187.1 mm footprint with M25 conduit hole fits standard pole configurations
In stock · Ships same business day

$70.00 $46.99 Save $23.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-125WMW1

Hanwha SBP-125WMW1 Wall/Pole Mount for Dome Cameras

Wall or pole mount for Hanwha dome cameras, aluminum body
- Dual mounting capability—single bracket works on walls or poles
- Aluminum body with polycarbonate cover resists corrosion outdoors
- Lightweight at 505g with adjustable positioning to aim camera
In stock · Ships same business day

$65.00 $43.99 Save $21.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Wind Deflection

Pole mounts must support camera weight plus environmental stress (wind, ice, vibration). Calculate total load: camera + bracket + PoE injector + cable weight, then select mounts rated 2–3× higher. Undersized mounts are a primary cause of field failures during adverse weather or system incidents.

Pole Diameter & Clamp Compatibility

Standard poles range from 1–2.5 inch OD (light poles, utility poles, fence posts). U-bolt and adjustable clamp mounts must match your pole specification; measure twice and verify clamping surface area and tightening torque limits. Mismatched clamps lead to slip and misalignment.

Field-of-View Alignment & Pan/Tilt Range

Pole mounts with integrated ball joints or adjustable arms allow ±45° tilt and 360° pan. Plan camera angles during deployment; verify that mount articulation range supports your DORI (Detection, Observation, Recognition, Identification) requirements. Proper angle directly impacts frame rate and storage throughput.

Material Grade & Coastal/Industrial Corrosion

Stainless steel (SS304 or SS316) and hot-dip galvanized mounts resist salt spray and UV degradation in marine or industrial zones. Standard mild steel requires painting and regular maintenance. For multi-year deployments in harsh environments, specify 316 stainless or epoxy-coated hardware.

Cable Routing & Strain Relief

Pole mounts with integrated cable trays, spiral wrap, and P-clips reduce mechanical stress on PoE cables and connectors. Poor cable management causes voltage drop and power delivery failures, especially in runs exceeding 75 feet. Use ferrite cores and strain-relief boots at camera and injector ends.

Thermal & Vibration Isolation

Pole-mounted cameras experience temperature swings (−40°F to +140°F) and constant vibration from wind and traffic. Select mounts with elastomer isolators or vibration-dampening feet; verify thermal expansion/contraction specs for fasteners and mounting surfaces. Loose connections escalate failures across multi-site deployments.

Technology Stack

The specs and acronyms that actually affect pole mounts & brackets performance.

Load Rating (lbs)

Maximum static weight the mount can support without permanent deformation. Multiply camera + bracket + PoE + cable weight; then select mount rated 2–3× that total. Typical ratings: 10–50 lbs for single-camera arms, 50–200 lbs for multi-camera rails.

Pole Clamp Type (U-bolt, Adjustable, Swivel)

U-bolts fit fixed pole OD and require precise measurement. Adjustable clamps span ranges (1–2 in., 1.5–2.5 in.) with gradual tightening. Swivel clamps rotate 360° for angled pole installations. Choose based on pole geometry and future repositioning needs.

Material Grade & Finish (Stainless 304/316, Galvanized, Powder-Coated)

SS304 resists corrosion in mildly corrosive environments; SS316 adds molybdenum for salt-spray and marine duty. Hot-dip galvanized (ASTM A123) offers lower cost with 50+ year life in non-coastal zones. Epoxy powder coat adds UV and chemical protection.

Pan/Tilt Range (degrees)

Articulation limits for camera aiming. Ball-joint mounts offer ±45° tilt and 360° pan; fixed-arm mounts offer only pre-set angles. Verify range satisfies your field-of-view plan and permits maintenance access for lens cleaning.

Cable Conduit & Management Integration

Integral spiral wrap, P-clips, and cable trays route Ethernet, power, and coax without external fasteners. Reduces installation time, prevents abrasion, and improves weatherproofing. Critical for exposed outdoor runs exceeding 50 feet.

Vibration & Wind Load Deflection

Measure inches of deflection under rated load at full extension. Lower deflection (<0.5 in.) ensures stable image; high deflection causes continuous focus hunting and image blur. Wind load (psf) must be calculated per mount geometry and local building codes.

Typical Deployment Scenarios

Single Light-Pole Perimeter Point (1 camera, 40-ft pole)

Deploy one IP camera on adjustable single-pole mount with 24-inch reach arm. Use 2-inch U-bolt clamp (rated 20 lbs), stainless-steel fasteners, and pre-wired PoE injector in weatherproof junction box at pole base. Add cable spiral wrap from mount to base (60 feet of run). Brands like Axis and Hikvision offer compact arms rated for 10–15 lbs.

Multi-Camera Pole Rail Installation (3 cameras, 20-ft utility pole)

Mount three fixed-position cameras on a horizontal rail bracket clamped 1.5–2 inches to pole. Verify combined load (45 lbs camera + bracket + cable weight); select rail rated 100+ lbs. Route three separate PoE runs in conduit; use ferrite cores at injector. Speco Technologies and Vivotek manufacture compact multi-camera poles.

Angled Perimeter Deployment (2 cameras, 60-degree corner mount on 2.5-inch pole)

Use swivel pole clamp and angled extension arm to aim two cameras toward building corner at optimal DORI distance. Calculate combined load, wind load per local codes, and cable run length (may exceed 100 feet). Employ PoE extenders or secondary injector at midpoint. i-PRO offers commercial-grade swivel brackets.

Coastal/Marine Environment (2 cameras, stainless-steel pole kit, 35-ft installation)

Specify SS316 stainless mounts, fasteners, and cable trays rated for salt-spray (ASTM B117, 1000+ hrs). Use conformal-coated PoE injector in NEMA 4X enclosure. Inspect quarterly and use dielectric grease on all connections. Hanwha and Axis offer marine-duty component lines.

Frequently Asked Questions

What pole diameters do your mounts support?

Most adjustable pole clamps fit 1–2 inch OD poles (common for light poles, fence posts, and standard utility poles). Verify your pole measurement (use calipers, not tape) and cross-check against mount clamp range. Custom adapters are available for non-standard 2.5–3 inch poles; contact sales or ask an expert.

How do I calculate the correct load rating for my pole mount?

Add: camera weight (typically 1–4 lbs) + bracket weight (0.5–2 lbs) + PoE injector (0.5 lbs) + cable weight (0.1 lbs per 10 feet). Then multiply by 2–3 for safety margin and environmental stress (wind, vibration, ice). For example, a 4 lb camera + 1 lb bracket + 0.5 lb PoE + 1 lb cable = 6.5 lbs; select a mount rated 15+ lbs.

Can I extend the reach of a pole mount to improve camera angle?

Yes. Extension arms (12–48 inches) attach to standard pole clamps and project cameras horizontally or at angles. Longer arms increase wind load and require higher-rated clamps. Calculate wind deflection using your local wind-speed zone (ASCE 7) and mount arm length; most 24–36 inch arms require 25+ lb rated clamps. Ferrite cores on PoE cables reduce EMI in long runs.

What material should I use in coastal or high-corrosion environments?

Specify stainless steel 316 (SS316) for salt-spray and marine duty. Standard galvanized steel requires painting and maintenance; SS304 handles mildly corrosive indoor/industrial zones. All fasteners, clamps, and cable trays should match material grade. Conformal-coated PoE injectors and NEMA 4X enclosures add protection. Plan quarterly inspections.

How do I secure cables on pole-mounted cameras to prevent damage?

Use integral spiral wrap, P-clips, and cable conduit included with quality mounts. Route PoE and video cables separately when possible; use ferrite cores on PoE near the camera. For runs exceeding 75 feet, employ midpoint PoE injectors or extenders to prevent voltage drop. Strain-relief boots at connector ends reduce mechanical stress.

Do you offer pre-assembled pole mount kits?

Yes. We carry single-camera arms, multi-camera rail kits, and complete clamp + adapter assemblies. Multi-camera kits include coordinated cable management and load-distribution hardware. View our quote tool or contact sales to build a custom bill of materials for your site survey. Wall mounts and camera mounting hardware are also available for multi-location deployments.

Pole Mounts & Brackets

Plan Your Deployment

Showing Results for Pole Mounts & Brackets

Axis T91A27 Pole Mount Bracket 10-Pack - 5503-971

Axis T91B57 Pole Mount Urban Grey - 01446-001

Axis T91F67 Marine-Grade Pole Mount Bracket - 5506-691

Axis T91M47 Pole Mount Bracket - 01149-001

Axis T94N01G Stainless Steel Pole Mount - 5901-341

Axis T94Y01G Pole Mount - 5801-551

Axis TD9301 Outdoor Midspan Pole Mount - 01951-001

Axis TP3301-E Pole Mount Bracket 1.5" - 02961-001

Axis TQ1301-E Pole Mount 50-150mm - 02343-001

Axis TX30 Steel Straps 1450mm Pair - 01471-001

Hanwha HT-E-BFP00CL Pole Adaptor for Explosion-Proof Cameras

Hanwha HT-SPMA-SD Pole Mount for Explosion Proof

Hanwha SBD-140PMB White Pole Mount Base

Hanwha SBD-140PMW Pole Mount Base White

Hanwha SBD-180PMW Pole Mount Base White

Hanwha SBP-125WMW1 Wall/Pole Mount for Dome Cameras

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Pole Mounts & Brackets

Frequently Asked Questions

Related Categories

Engineering Reading