Axis 02961-001 TP3301-E Pole Mount
Overview
The Axis 02961-001 is a dedicated pole-mounting bracket engineered for Axis IP cameras and compatible pendant kits. Built from powder-coated aluminum, this mount handles poles and beams between 65–165 mm (2.5–6.5 in) in diameter, delivering a secure installation in both indoor and outdoor environments. The 1.5" NPS threading accepts a broad range of Axis pendant kits, making it a practical choice for standardized camera deployments across building perimeters, parking structures, and industrial sites where pole mounting provides optimal sightlines.
Key Features
- Load Capacity: 25 kg (55 lb) — Sufficient for most fixed dome and panoramic camera heads without secondary bracing. If your camera assembly exceeds this weight, you'll need a reinforced bracket or dual-mount configuration.
- 1.5" NPS Threading — Standard Axis pendant kit interface. Confirms compatibility with the majority of Axis fixed and panoramic camera mounts in the catalog; verify your specific pendant kit before ordering.
- Pole Diameter Range: 65–165 mm (2.5–6.5 in) — Clamps securely to typical structural steel, aluminum conduit, and wooden poles. Measure your installation pole first; if it falls outside this range, a different bracket family may be required.
- Back-Mounted Cable Routing Hole — Directs network and power cables away from the camera's field of view and out of weather exposure. Reduces cable sag and improves water runoff on rainy installations.
- Compact Dimensions: 90 × 135 × 27 mm (3.5 × 5.3 × 1.1 in) — Minimal visual footprint on thin or medium-diameter poles. Keeps the assembly low-profile, useful in aesthetically sensitive deployments.
- Lightweight at 0.43 kg (0.9 lb) — Reduces structural stress on the pole, allowing easier installation by a single technician and lowering load calculations on older or flexible mounts.
- Powder-Coated Aluminum with Weather-Resistant Finish — Resists corrosion in coastal, industrial, and high-humidity environments. The impact-resistant coating absorbs minor mechanical damage without exposing bare aluminum to oxidation.
- Safety Certifications: EN 50581, IEC/EN 60950–1, IEC/EN 60950–22 — Confirms compliance with electrical safety and material directives across EU and international markets. Required for most enterprise and government procurement workflows.
- 3-Year Axis Warranty — Standard coverage for manufacturing defects. Does not include damage from improper installation, environmental abuse, or structural failure of the pole itself.
Deployment Considerations
The TP3301-E (model 02961-001) is purpose-built for fixed installations on structural poles or beams. Do not use this bracket for PTZ cameras or moving camera heads; the 25 kg load limit and static design do not accommodate dynamic stress from pan/tilt motors. Verify pole material and condition before installation—corroded, thin-wall, or composite poles may not provide adequate clamping surface. The back-mounted cable hole accommodates standard RJ45 and 12V DC connectors; oversized cable assemblies or armored conduit may require routing around the bracket instead.
In high-wind zones (hurricane, tornado risk), confirm that your pole's structural rating exceeds the combined weight of the camera head and this mount. If your site demands redundant power or dual camera feeds, plan cable routing before mounting to avoid congestion at the cable hole. For outdoor installations above 40 meters or in OSHA-regulated environments, follow local rigging and fall-protection protocols during installation.
When to Choose a Different Model
If your camera head exceeds 25 kg, the Axis family includes heavier-duty mounting solutions with load ratings up to 35–50 kg. For PTZ cameras or motorized heads, a reinforced pendulum or yoke bracket is required to handle dynamic torque. If you need horizontal pole-to-wall or corner-mount flexibility, consider alternate Axis pendant kit options. For microphone or thermal sensor integration on the same pole, verify that dual-mounting does not exceed the pole's combined structural capacity.
Compatibility
The 1.5" NPS threading confirms compatibility with standard Axis pendant camera kits. Always cross-reference your specific camera model and pendant assembly with the Axis compatibility matrix before purchase. The bracket supports IP camera recording systems via ONVIF-standard network interfaces on the camera itself—the mount is purely mechanical and does not affect streaming or codec support.
Frequently Asked Questions
Q: Can I use the Axis 02961-001 with non-Axis cameras?
A: The 1.5" NPS threading is a standard interface, but compatibility depends on whether your camera's pendant kit uses the same thread size. Verify compatibility with the camera manufacturer or mounting kit documentation before ordering.
Q: What is the maximum load capacity, and how do I verify my camera weight?
A: The 02961-001 supports up to 25 kg (55 lb). Check your camera's technical datasheet for total weight, including the pendant kit and any additional lenses or filters. If you are at or near the limit, consult the camera vendor for load-testing recommendations.
Q: Is this mount suitable for outdoor installation in coastal areas?
A: Yes. The powder-coated aluminum construction resists corrosion in salt-spray environments, but regular rinse-down is recommended to prevent salt buildup on fasteners. For extreme salt-fog zones (ASTM B117 testing), confirm coating thickness with Axis technical support.
Q: Can I route both PoE and analog power cables through the back-mounted cable hole?
A: The back hole accommodates standard RJ45 and small-gauge DC connectors. If your cables are oversized or armored, they may not fit; plan routing before installation. Do not force cables or create kinks that could damage connectors.
Q: What is the warranty coverage for the 02961-001?
A: The mount includes a 3-year Axis warranty covering manufacturing defects. Damage from improper installation, corrosion due to lack of maintenance, or structural failure of the mounting pole is not covered.
Q: Does the mount work with beams as well as poles?
A: Yes. The clamping mechanism secures to any pole or beam with a diameter of 65–165 mm. Measure the mounting surface diameter first to confirm fit.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 02961-001 is a straightforward, no-frills pole mount that handles one job well: securing fixed dome or panoramic camera heads to poles and beams in the 65–165 mm diameter range. The 25 kg load capacity is honest and practical—most fixed Axis domes with a standard pendant kit will sit comfortably within this limit. The key strength here is the back-mounted cable routing hole, which keeps network and power cables organized and out of the camera's sightline. In a busy multi-camera pole deployment, that detail saves time during commissioning and reduces maintenance headaches later.
Technical Highlights:
- 25 kg Load Capacity: Suitable for typical fixed dome cameras and small panoramic heads. If your pendant kit assembly approaches or exceeds this weight, you're looking at a heavier bracket or a dual-mount solution—factor this into your bill of materials upfront.
- 1.5" NPS Threading: Confirms compatibility with the majority of Axis pendant kits in production. Verify your specific camera model's pendant interface before ordering; this is not a universal CCTV mount.
- Powder-Coated Aluminum Construction: Resists weathering and UV degradation outdoors. The finish holds up well in temperate climates; in salt-spray or high-pollution zones, plan on periodic cleaning to extend service life.
- Back-Mounted Cable Hole: Routes cables cleanly away from the mounting surface and reduces exposure to standing water. In high-rain or coastal deployments, this detail matters for long-term reliability.
Deployment Considerations:
- Static Installations Only: Do not pair this mount with PTZ cameras or motorized heads. The fixed design and 25 kg limit will not handle the dynamic stress of pan/tilt motors or the thermal cycling they create.
- Pole Diameter Verification: Measure your mounting pole or beam before ordering. If it's corroded, thin-wall, or composite material, inspect it closely—a poor clamping surface will compromise camera stability and create sag over time.
- Cable Routing Planning: The back hole is sized for standard RJ45 and 12V connectors. If you're running oversized assemblies or armored conduit, plan alternate routing to avoid kinks or forced bends that degrade connector performance.
Deploy the 02961-001 in urban surveillance perimeters, industrial facility pole networks, and parking structure installations where fixed coverage and clean sightlines matter more than pan/tilt flexibility. For remote or exposed sites where pole winds are high, verify your structural pole's rating before mounting—this bracket is as strong as the pole it's attached to. The 3-year warranty covers manufacturing defects; it does not cover pole failure or improper installation, so budget for a qualified installer on critical deployments.
