Camera Mounting Hardware & Brackets | 187 Products

Plan Your Deployment

Camera model compatibility and mounting interface
Wall, ceiling, pole, or corner installation type
Indoor vs outdoor environmental requirements
Load-bearing capacity and structural support needs
Future service access and upgrade planning

Showing Results for Camera Mounting Hardware

Compare

Out of stock
Geovision

SKU: 51-MT20700-M001

Geovision Gv-Mount 207 51-MT20700-M001 Mount
Special Order · Ships in 2-3 weeks

$96.00 $95.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$96.00 $95.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Geovision

SKU: 150-MT420-000

Geovision GV-MOUNT420 150-MT420-000 Mount
Special Order · Ships in 2-3 weeks

$29.00 $28.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$29.00 $28.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Geovision

SKU: 150-MT503-000

Geovision GV-MOUNT503 150-MT503-000 Mount
Special Order · Ships in 2-3 weeks

$47.00 $46.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$47.00 $46.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: SBD-137WMA

Hanwha SBD-137WMA Wall Adapter Plate White

White wall adapter plate for Hanwha dome cameras ø137.5mm
- Aluminum construction with RAL9003 white finish resists corrosion
- Circular ø137.5 × 6.7mm design enables rotational camera positioning
- TR20 mount screw compatibility with QNV-C8083R and QNV-C9083R models
In stock · Ships same business day Special Order · Ships in 2-3 weeks

$20.00 $19.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$20.00 $19.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-150S

Hanwha SBP-150S Stainless Steel Mount Straps

Marine-grade SUS316L stainless steel straps for corrosion-prone outdoor mounts
- SUS316L stainless steel with molybdenum resists salt spray and chloride corrosion
- 1,500mm length per strap fits larger poles without custom fabrication or adapters
- Two straps per package enable dual-point mounting for stable, vibration-resistant setup
In stock · Ships same business day

$40.00 $29.99 Save $10.01

Add to Cart
The item has been added
Free shipping over $499

$40.00 $29.99 Save $10.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
Hanwha

SKU: XND-8082RF

Hanwha XND-8082RF 6MP IR Flush Mount Dome Camera

6MP flush dome with 40m IR and 3x zoom for zero-light indoor surveillance
- 40m WiseIR range covers complete darkness; 0.005 Lux B/W sensitivity
- 3x motorized varifocal (2.8–8.4mm) adjusts 114° to 40° field of view
- 120dB WDR, AI object detection, people counting, and auto-track analytics
In stock · Ships same business day

$1,350.00 $1,011.99 Save $338.01

Add to Cart
The item has been added
Free shipping over $499

$1,350.00 $1,011.99 Save $338.01

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: M-FM

i-PRO M-FM Flush Mount for M-87-V Dome Camera

Flush ceiling mount for i-PRO M-87-V dome cameras, 195mm cutout
Special Order · Ships in 2-3 weeks

$56.90 $55.99 Save $0.91

Add to Cart
The item has been added
Free shipping over $499

$56.90 $55.99 Save $0.91

Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: M-JB

i-PRO M-JB Round Junction Box for Fixed Dome Cameras

IP66 round junction box for ceiling-mount fixed dome cameras
In stock · Ships same business day

$37.10 $36.99 Save $0.11

Add to Cart
The item has been added
Free shipping over $499

$37.10 $36.99 Save $0.11

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: M-JB-MINI

i-PRO M-JB-MINI Round Junction Box IP66 Weatherproof

IP66 round junction box for ceiling/wall camera mounts, indoor/outdoor
In stock · Ships same business day

$28.76 $27.99 Save $0.77

Add to Cart
The item has been added
Free shipping over $499

$28.76 $27.99 Save $0.77

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: M-JB-MINI-B

i-PRO M-JB-MINI-B Round Junction Box for Bullet Cameras

Compact round junction box for i-PRO M-49-V and M-89-F-L bullets
In stock · Ships same business day

$42.56 $41.99 Save $0.57

Add to Cart
The item has been added
Free shipping over $499

$42.56 $41.99 Save $0.57

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: M-JB-T

i-PRO M-JB-T Round Junction Box for Dome Cameras

Compact 126mm aluminum junction box for i-PRO dome cameras
In stock · Ships same business day

$30.46 $29.99 Save $0.47

Add to Cart
The item has been added
Free shipping over $499

$30.46 $29.99 Save $0.47

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: PPRM35AW B1

i-PRO PPRM35AW B1 Parapet Mount

Parapet mount for roofline camera installation with 1-1/2 NPT thread
In stock · Ships same business day

$684.81 $536.99 Save $147.82

Add to Cart
The item has been added
Free shipping over $499

$684.81 $536.99 Save $147.82

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
i-PRO

SKU: PPRM35AW B2

i-PRO PPRM35AW B2 Parapet Mount

Parapet mount for rooftop surveillance on WV-QSR5XXF1 series cameras
In stock · Ships same business day

$684.81 $536.99 Save $147.82

Add to Cart
The item has been added
Free shipping over $499

$684.81 $536.99 Save $147.82

Add to cart Add to quote Compare
Compare

Out of stock
i-PRO

SKU: T1MK1F4SMC

i-PRO T1MK1F4SMC Cam-Lock Rack Mounting Hardware
Special Order · Ships in 2-3 weeks

$1,125.00 $805.99 Save $319.01

Add to Cart
The item has been added
Free shipping over $499

$1,125.00 $805.99 Save $319.01

Add to quote Compare
Compare

Out of stock
i-PRO

SKU: T1MK1F4SQMC

i-PRO T1MK1F4SQMC TROVE1M1 Cam-Lock Mounting Hardware
Special Order · Ships in 2-3 weeks

$1,400.00 $1,002.99 Save $397.01

Add to Cart
The item has been added
Free shipping over $499

$1,400.00 $1,002.99 Save $397.01

Add to quote Compare
Compare

Out of stock
i-PRO

SKU: T2MK7F8MC

i-PRO T2MK7F8MC TROVE2M2 Cam-Lock Mounting Hardware
Special Order · Ships in 2-3 weeks

$1,549.99 $1,109.99 Save $440.00

Add to Cart
The item has been added
Free shipping over $499

$1,549.99 $1,109.99 Save $440.00

Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Structural Compatibility

Camera weight, lens size, and pan-tilt actuator mass determine bracket capacity and fastener requirements. Verify substrate (concrete, wood, steel) and anchor type before installation. Undersized hardware creates safety hazards and system failure risk during critical incidents.

Installation Surface & Environmental Durability

Outdoor and wet-location brackets require stainless steel or powder-coated aluminum to resist salt spray and UV degradation. Indoor facilities may use zinc-plated steel. Match bracket material to NEMA rating and climate zone to prevent corrosion and premature hardware failure.

Cable Management & PoE Power Routing

Proper bracket design routes power and data cables cleanly, preventing pinch points, strain on connectors, and voltage drop. Poor cable management increases troubleshooting time and reduces effective PoE budget across your switch. Use cable clips, conduit passages, and strain relief.

Angle Adjustment & Fine Positioning

Ball mounts, gimbals, and tilt-pan brackets allow field-adjustable aiming without dismounting. Look for breakaway design to prevent camera damage if accidentally bumped. Brands like Axis and Pelco offer graduated scales and detent positions for repeatable settings.

Compliance with Brand-Specific Mounting Specs

Manufacturers including i-PRO, Hanwha, and Speco Technologies engineer cameras with specific mounting footprints and torque limits. Using non-approved hardware voids warranties and risks lens misalignment affecting focal plane and identification distance.

Standardization Across Multi-Location Deployments

Standardizing bracket types, fasteners, and adapters across sites simplifies spare parts inventory and technician training. Mixed mounting hardware increases maintenance burden and creates operational complexity as systems scale.

Technology Stack

The specs and acronyms that actually affect camera mounting hardware performance.

Load Rating (lbs)

Maximum camera weight a bracket safely supports, typically 5–35 lbs depending on arm length and actuator mass. Always include lens, sun shield, and wiper weight in your total. Exceeding load rating causes creep, drift, and eventual failure.

Pan-Tilt Compatibility

Bracket must accommodate motorized pan-tilt heads or integrated PTZ turrets. Verify bearing load rating, rotation range (0–350°), and cable pass-through design to avoid pinch hazards and data corruption from twisted cables.

Mounting Interface (NPTF / M4 / M6)

Industry-standard fastener threads for camera base connection. NPTF (National Pipe Thread Fuel) is common on small brackets; M4 and M6 metric threads on professional mounts. Mismatched threads prevent secure seating and cause optical misalignment.

Substrate Fasteners (Anchors / Lag Bolts)

Concrete requires expansion anchors or lag bolts; drywall uses toggle bolts or heavy-duty anchors; steel uses self-drilling screws or bolts. Oversized fasteners and improper installation depth reduce pull-out strength and allow drift.

IP Rating & Material Grade

IP66 and IP67 brackets suit outdoor and washdown environments; IP54 adequate for covered soffits. Stainless steel (304 or 316) resists saltwater; 6061-T6 aluminum and zinc-plated steel suit inland climates. Cheap coatings fail within 2–3 years in corrosive zones.

Cable Strain Relief & Conduit Passage

Designed openings and cable glands protect RJ45 connectors and power pigtails from sharp bends, pulling force, and water ingress. Lack of strain relief causes intermittent PoE loss, video dropout, and false alarm noise—critical issues in large-scale network deployments.

Typical Deployment Scenarios

Retail Perimeter (8 cameras, 24/7)

Mix of wall-mount brackets (entrance, rear dock) and ceiling pendant mounts (sales floor, stockroom). Requires stainless fasteners, IP54+ enclosures, and cable clips for 60–80 ft total runs. Axis T92 and Pelco PAB clamps are industry standards.

Parking Lot & Lot Perimeter (6 cameras, 50–100 ft poles)

Heavy-duty pole mounts with offset arms, 15–25 lb load capacity, and 316 stainless construction for saltwater/freeze-thaw cycles. Requires vibration dampers and redundant fastening to survive wind loading. Typical install: camera weight + PTZ actuator = 18–22 lbs.

School Hallway & Classroom (12–16 cameras, mixed mounting)

Combination of corner brackets (hallway intersections), recessed back boxes (ceiling tiles), and wall mounts (entry/gym). See K-12 design guide for placement best practices. Standardize on ball mounts for adjustable aiming without dismounting.

Warehouse / Industrial (20–40 cameras, 12+ ft ceilings)

High-capacity ceiling pendant kits with cable strain relief, junction boxes, and drip loops. Dust and humidity require IP65+ enclosures and Speco or Hanwha brackets rated for condensation zones. Mount spacing 30–50 ft to balance coverage and identification distance requirements.

Frequently Asked Questions

What's the difference between M4, M6, and NPTF mounting threads?

M4 and M6 are metric machine screws (4mm and 6mm diameter) used on most professional surveillance cameras and lighter brackets. NPTF (National Pipe Thread) is a tapered thread standard on older or specialty mounts. Always verify your camera's mounting footprint before purchasing a bracket—mismatched threads prevent secure seating and cause drift or lens misalignment.

Can I use drywall anchors for outdoor camera brackets?

No. Outdoor installations require concrete expansion anchors, lag bolts, or structural fastening into wood/steel studs behind the drywall. Drywall anchors lack weathering and pull-out strength, and outdoor moisture causes rust and fastener failure. Use substrate-appropriate anchors rated for your load and environment.

Do I need a separate back box, or does the bracket include cable management?

It depends on the bracket type. Recessed mounts and back boxes bundle cable pass-through and junction areas for in-wall installations. Wall and pole brackets often require separate strain relief clips or conduit. Pendant kits include cable glands and drip loops. Always verify cable routing capacity against your run length and PoE cable gauge.

How do I choose between stainless steel and powder-coated aluminum brackets?

Stainless steel (304 or 316) resists saltwater and aggressive industrial environments; 316 is required within 1 mile of the ocean. Powder-coated 6061-T6 aluminum suits inland climates and is lighter, reducing load on fasteners. For wet but non-corrosive sites, zinc-plated steel is cost-effective. Inspect coatings annually in harsh zones—cheap plating fails in 2–3 years.

What load rating do I need for a PTZ camera with a motorized pan-tilt head?

PTZ assemblies (camera + actuator + optics) typically weigh 15–35 lbs depending on lens size and zoom range. Verify both camera and actuator weight, then add 10–15% safety margin. Select a bracket rated 1.5× the combined weight. Undersized brackets cause creep, missed pan positions, and focus drift during critical incident recording.

How do I prevent cable pinch and voltage drop in outdoor brackets?

Route PoE and coax cables through strain relief openings, cable glands, and conduit passages built into the bracket. Avoid sharp bends tighter than the cable's bend radius (typically 1 inch for CAT6). Use cable clips to prevent dangling and tension. Poor routing causes PoE voltage loss, intermittent connectivity, and false alarms.

Camera Mounting Hardware

Plan Your Deployment

Showing Results for Camera Mounting Hardware

Geovision Gv-Mount 207 51-MT20700-M001 Mount

Geovision GV-MOUNT420 150-MT420-000 Mount

Geovision GV-MOUNT503 150-MT503-000 Mount

Hanwha SBD-137WMA Wall Adapter Plate White

Hanwha SBP-150S Stainless Steel Mount Straps

Hanwha XND-8082RF 6MP IR Flush Mount Dome Camera

i-PRO M-FM Flush Mount for M-87-V Dome Camera

i-PRO M-JB Round Junction Box for Fixed Dome Cameras

i-PRO M-JB-MINI Round Junction Box IP66 Weatherproof

i-PRO M-JB-MINI-B Round Junction Box for Bullet Cameras

i-PRO M-JB-T Round Junction Box for Dome Cameras

i-PRO PPRM35AW B1 Parapet Mount

i-PRO PPRM35AW B2 Parapet Mount

i-PRO T1MK1F4SMC Cam-Lock Rack Mounting Hardware

i-PRO T1MK1F4SQMC TROVE1M1 Cam-Lock Mounting Hardware

i-PRO T2MK7F8MC TROVE2M2 Cam-Lock Mounting Hardware

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Camera Mounting Hardware

Frequently Asked Questions

Related Categories

Engineering Reading