Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Axis

SKU: 01513-001

Axis T94N01D IP66 Pendant Kit - 01513-001

IP66 pendant kit for P3717-PLE outdoor camera mounting
- IP66 weatherproof housing sheds rain and dust for outdoor surveillance
- 1.5-inch NPS thread pairs with standard poles and third-party accessories
- Single kit supports wall, pole, parapet, and corner mounting configurations
In stock · Usually Ships Same Business Day

$99.00 $95.99 Save $3.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-137WMW1

Hanwha SBP-137WMW1 Dome Mount, White

Aluminum dome mount for 12 Hanwha camera models, indoor/outdoor
- Compatible with QNV and LNV series dome and turret cameras
- Aluminum and plastic construction rated for outdoor environments
- Includes wall mount plate and installation hardware for quick setup
In stock · Usually Ships Same Business Day

$65.00 $49.99 Save $15.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01472-001

Axis TX30 Steel Straps 570mm 1 Pair - 01472-001

Steel straps for Axis cameras on poles, 570mm with corrosion resist
- Steel construction resists bending; 570mm length fits 1.5–3.5" poles
- One pair (2 straps) enables dual-point mounting to minimize camera sway
- Corrosion-resistant finish rated for indoor and outdoor deployments
In stock · Usually Ships Same Business Day

$41.00 $39.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-331

Axis T91A10 PIR Motion Detector Mounting Kit - 5507-331

Tool-free mounting kit for Axis PIR detectors with adjustable positioning
- Tool-free assembly saves installation labor on multi-detector security jobs
- Adjustable angle and leveling ensure accurate detector orientation and coverage
- Durable plastic construction resists corrosion in indoor commercial environments
In stock · Usually Ships Same Business Day

$20.00 $18.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WMW1

Hanwha SBP-300WMW1 White Wall Mount

White wall mount for Hanwha cameras with tool-free setup
- Standard white-finish bracket integrates with Hanwha modular camera ecosystem
- Tool-free installation with complete mounting hardware included
- Rated for indoor and outdoor use across -50°C to +60°C temperature range
In stock · Usually Ships Same Business Day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: PM

Hikvision PM Pole Mount Adapter, White

Aluminum pole mount adapter for IP cameras, 2–4" poles, 14.3 lbs capacity
- Aluminum die-cast construction with stainless steel clasps resists corrosion in outdoor environments
- Supports up to 14.3 lbs—suitable for fixed and varifocal cameras with housings
- White finish mounts discreetly on poles and building surfaces without high visibility
Special Order · Usually Ships in 2-3 Weeks

$41.00 $8.99 Save $32.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-156HMW

Hanwha SBP-156HMW White Hanging Mount

Ceiling hanging mount for Hanwha IP cameras, IP66 weatherproof
- IP66 rated aluminum construction blocks rain and dust in outdoor installations
- Tool-free pan and tilt adjustment with 1.5" NPT thread for quick mounting
- White finish matches Hanwha X, Q, P and Wisenet camera housings
In stock · Usually Ships Same Business Day

$65.00 $49.99 Save $15.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: RPM

Hikvision RPM Roof Parapet Mount, White

Aluminum parapet wall bracket for rooftop surveillance camera placement
- Aluminum alloy construction resists corrosion in outdoor rooftop environments
- Parapet wall-specific mounting geometry aligns with standard concrete anchor patterns
- Hikvision White finish blends with modern commercial building aesthetics
In stock · Usually Ships Same Business Day

$174.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-329HM

Hanwha SBP-329HM Outdoor Mounting Cap

White outdoor mounting cap for PNM-9080VQ and PNM-9081VQ cameras
- Weather-resistant polymer construction rated for outdoor surveillance installations
- White finish maintains clean aesthetic across multi-camera deployments
- Compatible with Hanwha PNM-9080VQ and PNM-9081VQ camera models
Special Order · Usually Ships in 2-3 Weeks

$75.00 $48.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR504F1-W

i-PRO WV-QSR504F1-W Wall Mount Bracket 1.5 NPS

Wall mount for i-PRO PTZ cameras with 1.5" NPS thread, 15–25 lbs
- 1.5" NPS female ANSI thread ensures direct, centered engagement with PTZ housing
- White powder-coat finish resists corrosion indoors and in light outdoor conditions
- Wall orientation simplifies cable runs and keeps sightlines clear of obstructions
In stock · Usually Ships Same Business Day

$63.64 $56.99 Save $6.65

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBO-100B1

Hanwha SBO-100B1 Aluminum Backbox for Bullet Cameras

Aluminum backbox for Hanwha bullet cameras with outdoor weather resistance
- Corrosion-resistant aluminum construction for coastal and high-humidity environments
- Custom-fit design for Hanwha bullet cameras eliminates shimming and misalignment
- Wall, pole, and corner-mount hardware included for flexible installation
In stock · Usually Ships Same Business Day

$49.00 $36.99 Save $12.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBV-A14B

Hanwha SBV-A14B Polycarbonate Back Box for A Series Cameras

White polycarbonate back box for Hanwha A Series cameras
- Fits standard US electrical gang boxes—no custom drilling or framing
- 5.67" diameter, 2.01" depth for compact wall-mounted installations
- UV-resistant polycarbonate won't rust or corrode in indoor/outdoor areas
In stock · Usually Ships Same Business Day

$34.99 $26.99 Save $8.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC140-DM45

Hikvision PC140-DM45 Pendant Cap Mount

Pendant mount for Hikvision dome cameras—suspend from overhead structures
- Suspends cameras from ceiling joists, pipes, or grid systems where wall/ceiling mounting isn't feasible
- Quick-attach design integrates directly with Hikvision dome camera series without adapters
- Color-coordinated finish and durable engineered materials blend with dome housing
In stock · Usually Ships Same Business Day

$39.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02025-001

Axis TP3603 Conduit Back Box ½" ¾" - 02025-001

Weatherproof conduit back box for Axis IP cameras indoors and out
- ½" and ¾" conduit entries for code-compliant cable management
- Weatherproof construction protects connections from rain and dust
- Houses relay boards and terminals alongside camera bracket mounting
In stock · Usually Ships Same Business Day

$63.00 $60.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
2N

SKU: 01351-001

2N IP Force Gooseneck Stand - 01351-001

Gooseneck stand for 2N IP Force/Safety intercoms at vehicle checkpoints
- High-grade metal construction resists UV and corrosion in outdoor environments
- Gooseneck arm positions intercom at driver eye-level for clear communication
- Fixed floor-mount base provides stable platform for checkpoint and toll booth use
In stock · Usually Ships Same Business Day

$349.00 $338.99 Save $10.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-215HMW

Hanwha SBP-215HMW White Cap Adapter

White cap adapter for Hanwha cameras with heat-reflective finish
- Weatherproof plastic construction protects against rain, snow, and UV
- White finish reflects solar heat to reduce thermal buildup on camera
- Tool-free quick-attach mounting with included hardware and instructions
In stock · Usually Ships Same Business Day

$40.00 $30.99 Save $9.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Axis T94N01D IP66 Pendant Kit - 01513-001

Hanwha SBP-137WMW1 Dome Mount, White

Axis TX30 Steel Straps 570mm 1 Pair - 01472-001

Axis T91A10 PIR Motion Detector Mounting Kit - 5507-331

Hanwha SBP-300WMW1 White Wall Mount

Hikvision PM Pole Mount Adapter, White

Hanwha SBP-156HMW White Hanging Mount

Hikvision RPM Roof Parapet Mount, White

Hanwha SBP-329HM Outdoor Mounting Cap

i-PRO WV-QSR504F1-W Wall Mount Bracket 1.5 NPS

Hanwha SBO-100B1 Aluminum Backbox for Bullet Cameras

Hanwha SBV-A14B Polycarbonate Back Box for A Series Cameras

Hikvision PC140-DM45 Pendant Cap Mount

Axis TP3603 Conduit Back Box ½" ¾" - 02025-001

2N IP Force Gooseneck Stand - 01351-001

Hanwha SBP-215HMW White Cap Adapter

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading