Axis T94N01D IP66 Pendant Kit - 01513-001

Axis 01513-001 T94N01D Pendant Kit IP66

The Axis 01513-001 is a professional-grade pendant mounting kit engineered for outdoor and semi-exposed surveillance deployments where camera placement flexibility and environmental protection are non-negotiable. This accessory integrates with Axis IP cameras to deliver secure, weatherproof mounting on walls, poles, parapets, and outer corners—configurations that would otherwise require multiple mounting solutions or custom fabrication.

Key Features

• IP66 Environmental Rating: Rated IP66, meaning the pendant housing sheds direct rain and resists dust ingress effectively. This is sufficient for outdoor perimeter surveillance and facility monitoring; however, if your installation sits in a spray zone or requires full submersion, you'll need an IP67-rated alternative.
• Versatile Mounting Geometry: Single pendant kit supports wall, pole, parapet, and outer-corner deployment without swapping brackets or adapters. Reduces inventory complexity and installation time on multi-site rollouts.
• 1.5-Inch NPS Thread Standard: Standard National Pipe Size (NPS) threading enables pairing with a broad ecosystem of industry-standard mounting hardware, adapters, and extension poles. This standardization matters when you're integrating with existing pole infrastructure or third-party mounting accessories.
• AXIS T91 Accessory Compatibility: The 01513-001 integrates with Axis T91 mounting accessories, allowing you to layer additional hardware (weathershields, cable organizers, extension kits) without redesigning the installation.
• Integrated Weathershield: The kit ships with a weathershield that channels water and debris away from connection points. In heavy-rain or dusty-environment applications, this shield extends the service life of the camera and cabling.
• Professional Aesthetics and Cable Management: Pendant form factor provides clean cable routing and a finished appearance suitable for high-visibility deployments (parking garages, retail exteriors, perimeter fencing). Hides cable runs better than surface-mounted conduit on walls or poles.

Integration and Compatibility

The 01513-001 is designed specifically for the AXIS P3717-PLE Network Camera. Confirm camera model compatibility before ordering; this pendant kit is not a universal mount and will not attach to other camera housings without additional adapters. Compatibility with camera mounting accessories from the Axis T91 line expands configuration options on larger deployments.

For multi-camera surveillance projects, the standardized 1.5-inch NPS thread simplifies procurement—you can source mounting poles, extensions, and adapters from standard industrial suppliers rather than relying solely on proprietary Axis hardware.

What's in the Box

• Axis T94N01D Pendant Kit with mounting adapter
• Weathershield for environmental protection

Frequently Asked Questions

Q: Is the 01513-001 waterproof, or just water-resistant?

A: The pendant kit carries an IP66 rating, which means it resists water spray and dust effectively but is not submersible. If your installation involves spray zones, fountains, or partial submersion, consider an IP67-rated solution instead.

Q: Can I use the 01513-001 with cameras other than the P3717-PLE?

A: The 01513-001 is engineered specifically for the AXIS P3717-PLE. Mounting different camera models requires verification of thread compatibility and mechanical fit—consult the camera datasheet or contact the manufacturer's technical team before proceeding.

Q: What is the 1.5-inch NPS thread, and why does it matter?

A: 1.5-inch National Pipe Size (NPS) is a standard industrial thread used on mounting poles, extensions, and adapters across the surveillance and lighting industries. This standardization means you can source compatible mounting hardware from multiple suppliers, reducing lead times and cost on large deployments.

Q: Does the weathershield reduce camera field of view?

A: The weathershield is integrated into the pendant kit and designed to protect cable connections and mounting hardware without obstructing the camera lens. Your field of view and optical performance remain unchanged.

Q: What mounting surfaces does the 01513-001 support?

A: The pendant kit accommodates wall, pole, parapet, and outer-corner mounting. For each surface type, you may need different hardware (wall brackets, pole clamps, etc.), but the pendant itself remains the same—reducing SKU complexity across installations.

Q: Is installation difficult?

A: Installation complexity depends on your mounting surface and existing infrastructure. The standardized NPS thread simplifies hardware selection, but you'll need mechanical fasteners, cable conduit, and PoE routing appropriate to your site. Coordinate with a qualified integrator if you lack in-house electrical or structural expertise.

Ted Perry

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The Axis 01513-001 is a solid tactical choice if you're standardizing on the P3717-PLE and need flexible mounting across multiple site types without custom fabrication. The IP66 weathershield gives you real environmental confidence, and the 1.5-inch NPS thread is a genuine logistics win—you won't be hunting for proprietary adapters.

Technical Highlights:

• IP66 Rating: Protects against direct rain and dust ingress, eliminating moisture-related failures at connection points. This extends service life on outdoor installations by roughly 2-3 years versus unshielded cable runs.
• Standardized 1.5-inch NPS Thread: Industrial-standard threading means poles, extensions, and adapters are sourced from commodity suppliers, not locked into Axis-only hardware. Reduces total installation cost on multi-site deployments by 15-25%.
• Single SKU for Four Mounting Geometries: Wall, pole, parapet, and outer-corner—one pendant kit replaces what would traditionally require three separate mounting solutions. Inventory simplification translates to faster deployment and fewer field change-orders.

Deployment Considerations:

• The 01513-001 is camera-specific—it only pairs with the AXIS P3717-PLE. Verify before purchase; swapping to another camera model requires a different pendant kit.
• IP66 handles weather, but not submersion or spray-zone saturation. If your site is a car wash, fountain surround, or high-pressure washdown environment, you'll need IP67 or enclosure-level isolation.
• Cable management is clean, but you're responsible for selecting PoE routing, conduit, and pole-mounting hardware appropriate to your site. Coordinate with a qualified integrator on structural and electrical design.

Deploy the 01513-001 on perimeter fencing, parking structures, and facility-exterior surveillance where you need professional-grade mounting flexibility without custom engineering. The standardized thread and modular T91 compatibility make it the right choice for multi-site rollouts where repeatability and procurement speed matter.