Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Axis

SKU: 02425-001

Axis TM3204 Recessed ceiling mount for IP cameras - 02425-001

Recessed ceiling mount for Axis IP cameras with pan/tilt adjustment
- Sits flush in drop-ceiling cavity with no visible bracket below tile line
- Pan, tilt, and rotate for on-site field-of-view fine-tuning without remount
- Ships with fasteners and anchors for standard drop-ceiling installation
In stock · Usually Ships Same Business Day

$63.00 $60.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02712-001

Axis TP1602-E Conduit Back Box IP66 - 02712-001

IP66 conduit back box with IK10 impact resistance for outdoor camera installations
- IP66 dust-tight, direct water jet resistant housing protects connections from washdown and rain
- IK10 rated to withstand 20-joule impacts in high-traffic outdoor and warehouse environments
- Pre-molded conduit entry ports for code-compliant cable routing; fits Axis P14 and Q19 cameras
In stock · Usually Ships Same Business Day

$84.00 $80.99 Save $3.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC-G1

Hikvision PC-G1 Pendant Cap for PanoVu Camera

Aluminum pendant cap for PanoVu ceiling mounts, IP66 rated for outdoor
- IP66 weatherproofing blocks dust and water spray at exterior ceiling points
- Aluminum alloy with white finish resists corrosion across -40°C to 60°C range
- 150g lightweight design fits DS-2CD6D54G1-IZS without structural reinforcement
In stock · Usually Ships Same Business Day

$104.99

Add to Cart
The item has been added
Compare

Out of stock
Hikvision

SKU: PMP-V-G

Hikvision PMP-V-G Horizontal Pole Mounting Bracket

Horizontal pole mount for Hikvision speed domes, 2.6"–5" poles
- Aluminum alloy construction with spray coating rated for indoor/outdoor use
- Supports up to 44 lbs for speed dome cameras and mounted accessories
- Simple installation on standard poles without requiring specialized tools
Special Order · Usually Ships in 2-3 Weeks

$44.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: WBL

Hikvision WBL Wall Mount Box Camera Bracket Long

Die-cast aluminum wall bracket for box cameras up to 18.7 lbs
- 18.7 lb arm load capacity handles full-size professional cameras without sag
- Pan and tilt field-adjustable angles optimize coverage without unmounting
- Indoor/outdoor rated die-cast aluminum resists corrosion on building facades
In stock · Usually Ships Same Business Day

$28.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02818-001

Axis TM3211 Recessed Mount Accessory - 02818-001

Recessed ceiling mount for discrete Axis camera installations
- Flush-mount design conceals hardware while maintaining full surveillance coverage
- Compatible with standard Axis camera models across corporate and retail spaces
- Durable construction minimizes vibration for stable, consistent video performance
Special Order · Usually Ships in 2-3 Weeks

$52.00 $49.99 Save $2.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02411-001

Axis TQ5001-E Wall and Pole Mount - 02411-001

Rugged wall/pole mount for Axis PTZ cameras, IP66/NEMA 4X rated
- Supports 40 kg load with IP66, NEMA 4X, and IK10 impact protection
- Operates -50°C to 65°C with aluminum construction and white finish
- Compatible with Axis P55, P56, Q37, Q60, and Q61 series cameras
Special Order · Usually Ships in 2-3 Weeks

$169.00 $163.99 Save $5.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBO-147B

Hanwha SBO-147B Waterproof Aluminum Back Box

IP67/IK10 aluminum back box for Hanwha cameras in harsh outdoor
- IP67 waterproof + IK10 vandal-rated aluminum resists rain, dust, impact
- Operates -50°C to 50°C; lightweight (0.9 kg) with wall or ceiling mount
- Purpose-built for Hanwha X, Q, P, and Wisenet IP camera lines
In stock · Usually Ships Same Business Day

$75.00 $55.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CMP-JB

Hikvision CMP-JB Corner Mounting Bracket for Speed Dome

Corner mount bracket for speed domes—22 lb capacity, aluminum/steel build
- 22 lb load capacity handles mid to full-size speed dome cameras smoothly
- Aluminum alloy and steel construction resists sagging during months of PTZ use
- Works with JPB-WL junction box for internal cable routing and clean appearance
In stock · Usually Ships Same Business Day

$78.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC135H

Hikvision PC135H Pendant Cap for Dome Camera

Aluminum pendant cap for Hikvision dome cameras, white finish
- Aluminum alloy construction resists corrosion in indoor/outdoor settings
- Spray-treated surface prevents oxidation and maintains professional appearance
- Direct mechanical compatibility with Hikvision dome cameras, no adapters needed
In stock · Usually Ships Same Business Day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR501S-W

i-PRO WV-QSR501S-W Wall Mount Bracket for Dome Cameras

White wall bracket for i-PRO dome cameras, 4-screw pattern
- Four-point fastening distributes load evenly, reduces stress on anchors
- Standard mounting pattern works across i-PRO dome camera lineup
- Powder-coat white finish for indoor and sheltered outdoor use
In stock · Usually Ships Same Business Day

$170.60 $146.99 Save $23.61

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02361-001

Axis F91 DIN Rail Mounting Clip - 02361-001

35mm DIN rail clip for compact AXIS F91 panel mounting
- Mounts F91 main units short-side-forward to standard DIN rail
- Cable routing in three directions—up, down, or outward from rail
- Includes angled bracket option for flexible installation geometry
In stock · Usually Ships Same Business Day

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: CM

Hikvision CM Corner Mount Adapter, White

Corner mount adapter in white aluminum for surveillance cameras up to 22 lbs
- Die-cast aluminum construction resists corrosion and UV degradation outdoors
- 22 lbs (10 kg) load capacity fits most compact bullets, turrets, and PTZ models
- White finish blends into light building surfaces without aesthetic compromise
In stock · Usually Ships Same Business Day

$61.99

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: PWM850

i-PRO PWM850 Pantone Gray Pendant Shroud & Wall Bracket

Dual-mount pendant shroud and wall bracket for i-PRO cameras
- Pendant shroud and wall bracket in one assembly—switch mounting without extra hardware
- Pantone Gray finish for discrete, professional appearance in any facility
- Compatible with i-PRO camera systems for streamlined surveillance deployment
Special Order · Usually Ships in 2-3 Weeks

$175.00 $150.99 Save $24.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Vivotek

SKU: AM-21C

Vivotek AM-21C PTZ Camera Wall Mount Bracket

Aluminum PTZ wall mount with vibration isolation for smooth pan-tilt
- Aluminum alloy construction resists corrosion in outdoor/coastal environments
- Vibration-isolated design eliminates jerky motion during PTZ tracking sequences
- Compact 276 × 140 × 202 mm footprint fits tight wall spaces
In stock · Usually Ships Same Business Day

$146.00 $118.99 Save $27.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5504-711

Axis 5504-711 Corner Bracket Mount

Corner bracket mount for dual-angle coverage at building intersections
- Positions single camera at corner junction to cover two adjacent walls
- Weather-resistant construction in RAL 9003 white, weighs only 1.8 kg
- Compatible with Axis P5414-E/15-E, Q1765-LE, Q1931-E, P33-VE cameras
Special Order · Usually Ships in 2-3 Weeks

$94.00 $90.99 Save $3.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Axis TM3204 Recessed ceiling mount for IP cameras - 02425-001

Axis TP1602-E Conduit Back Box IP66 - 02712-001

Hikvision PC-G1 Pendant Cap for PanoVu Camera

Hikvision PMP-V-G Horizontal Pole Mounting Bracket

Hikvision WBL Wall Mount Box Camera Bracket Long

Axis TM3211 Recessed Mount Accessory - 02818-001

Axis TQ5001-E Wall and Pole Mount - 02411-001

Hanwha SBO-147B Waterproof Aluminum Back Box

Hikvision CMP-JB Corner Mounting Bracket for Speed Dome

Hikvision PC135H Pendant Cap for Dome Camera

i-PRO WV-QSR501S-W Wall Mount Bracket for Dome Cameras

Axis F91 DIN Rail Mounting Clip - 02361-001

Hikvision CM Corner Mount Adapter, White

i-PRO PWM850 Pantone Gray Pendant Shroud & Wall Bracket

Vivotek AM-21C PTZ Camera Wall Mount Bracket

Axis 5504-711 Corner Bracket Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading