Axis 02361-001 TF9903 DIN Rail Clip
Overview
The Axis 02361-001 is a purpose-built mounting clip for securing AXIS F91 main units to a standard 35mm DIN rail — the backbone of industrial control panel and equipment rack installations. This accessory solves a real constraint: fitting compact modular surveillance logic into tight spaces where floor or wall real estate is precious. If you're building a control panel or server room deployment with an F91, this clip eliminates the need for alternative (and often bulkier) mounting schemes.
Key Features
- 35mm DIN Rail Compatibility: Mounts directly to the standard 35mm DIN rail found in industrial cabinets, control panels, and equipment racks. No special fasteners or adapters required — it clips on, just like any other DIN-mounted component. This matters because it keeps your installation footprint consistent with existing infrastructure.
- Designed for AXIS F91 Main Units: The clip geometry is engineered specifically for the F91 form factor, ensuring a solid, rattle-free fit without modification or workarounds.
- Compact Mounting Orientation: The F91 can be mounted with its short side against the rail, significantly reducing the depth or width it consumes inside the cabinet — a critical factor when panel space is rationed.
- Three-Direction Cable Routing: Cable connections can exit upward, downward, or outward from the rail, giving you flexibility to route network and power feeds without adding strain relief loops or conduit detours.
- Durable Industrial Construction: Built from materials suited to the temperature and humidity swings typical of factory floors, server rooms, and outdoor-mounted control cabinets. No corrosion or material degradation expected in standard industrial environments.
- Angled Mounting Bracket Included: The package provides an additional angled bracket variant, offering an alternative installation geometry if your panel layout or cable management prefers a tilted mounting angle.
Integration & Compatibility
This clip is a pure hardware solution — it does not involve any electronics, software, or active components. Compatibility is limited to the AXIS F91 main unit family. The 35mm DIN rail is a commodity standard; any panel, rack, or enclosure pre-drilled or pre-equipped for DIN rail will accept this clip. No ONVIF negotiation, VMS configuration, or firmware updates are needed. It simply mounts and stays mounted.
When to Consider This Accessory
Deploy the Axis 02361-001 if your F91 installation must fit into an industrial control panel, network equipment cabinet, or distributed edge compute enclosure where DIN rail mounting is the standard. Skip this if your F91 will sit on a shelf, wall-mount on a flat surface, or use a different form factor of Axis main unit. If you're integrating an F91 into an existing panel with limited DIN rail space, the compact short-side-forward mounting orientation becomes a genuine space-saver compared to tabletop placement.
What's in the Box
- 1x Axis TF9903 DIN Rail Clip
- 1x Angled mounting bracket
Frequently Asked Questions
Q: Will the 02361-001 fit any 35mm DIN rail?
A: Yes. The clip is designed for standard 35mm DIN rail, which is the universal industrial mounting standard. As long as your panel or enclosure has standard 35mm DIN rail (not slotted or proprietary variants), the clip will mount securely.
Q: Can I mount the F91 horizontally with this clip?
A: The clip allows the F91 to mount with its short side against the rail, which minimizes depth. Cable routing can exit in three directions (up, down, or out), so you can achieve different geometric orientations depending on your panel layout and cable routing needs.
Q: Is the angled bracket a separate purchase?
A: No. The Axis 02361-001 package includes both the standard DIN rail clip and an angled mounting bracket variant, giving you two installation options from a single order.
Q: What does the 02361-001 weigh?
A: The clip is designed for compact DIN rail mounting and carries minimal weight. It will not stress the rail or add significant load to the cabinet frame.
Q: Do I need any tools to install this?
A: Installation is straightforward — the clip slides onto the 35mm DIN rail and locks in place by hand. No screwdrivers or torque wrenches are required. Cable connections to the F91 use standard RJ45 and power connectors depending on the F91 configuration.
Q: Is this clip suitable for outdoor or harsh-environment panels?
A: The clip is constructed from durable materials suited to industrial environments, including temperature and humidity variation. However, if the panel itself is unheated or exposed to salt spray or direct UV, verify that your F91 and any connected sensors are rated for those conditions — the clip itself will not degrade.
