Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Out of stock
Axis

SKU: 5801-861

Axis T94B03L Recessed Mount Bullet Cameras - 5801-861

Recessed aluminum mount for discreet bullet camera installation in drop ceilings
- Fits AXIS M2025/M2026 and Companion Bullet cameras in suspended ceiling spaces
- Aluminum construction with complete mounting hardware kit included
- Indoor recessed design keeps surveillance infrastructure hidden from view
Special Order · Usually Ships in 2-3 Weeks

$84.00 $80.99 Save $3.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5504-921

Axis T94D02S Curved Mount Bracket White 10 pcs - 5504-921

Curved mount brackets for Axis P39xx cameras on non-flat surfaces, pack of 10
- Tool-free installation with integrated hardware for quick multi-camera setups
- Plastic construction rated IK10 for wall and pendant mounting indoors
- Compatible with Axis P3904-R, P3905-R, and P3915-R camera models
Special Order · Usually Ships in 2-3 Weeks

$41.00 $39.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5503-881

Axis T94F01D Pendant Kit Accessory - 5503-881

Ceiling or pipe-mount pendant kit for compact dome cameras indoors
- Mounts to AXIS T91A brackets or 1.5" NPT/NPS threaded pipe
- Integrated cable pathway keeps network cabling organized and protected
- RJ45 coupler included for easy network connection and extension
In stock · Usually Ships Same Business Day

$52.00 $49.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01445-001

Axis T94J01A Wall Mount Grey - 01445-001

Wall mount for Axis PTZ cameras, impact-resistant aluminum, indoor/outdoor
- Impact-resistant aluminum construction handles vibration and thermal stress from motorized pan-tilt operation
- M25 (3/4") conduit entry points route power and network cables through protective rigid pipes
- Rated for indoor and outdoor environments with urban gray finish that blends into architectural backgrounds
In stock · Usually Ships Same Business Day

$259.00 $250.99 Save $8.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5505-091

Axis T94M01D Outdoor Pendant Mount Kit - 5505-091

Outdoor pendant mount for Q3505-VE cameras on 1.5" NPS pipe
- IP67-rated, weather-resistant housing withstands rain and UV exposure
- Pendant design suspends camera from above for downward sight lines
- Direct fit to standard 1.5" NPS threaded pipes; works with T91A67 mounts
In stock · Usually Ships Same Business Day

$73.00 $70.99 Save $2.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5901-341

Axis T94N01G Stainless Steel Pole Mount - 5901-341

Stainless steel pole mount for PTZ cameras, fits 60–400mm poles
- IK10 impact rating withstands 20 joules of directed force without damage
- Three stainless steel straps span 2.4–15.7 inch pole diameters without adapters
- Sealing gaskets at cable entry block moisture and insects in outdoor sites
Special Order · Usually Ships in 2-3 Weeks

$229.00 $221.99 Save $7.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02076-001

Axis T94N02D Pendant Kit Pole Mount - 02076-001

Pendant pole mount for Axis panoramic cameras with 1.5" NPS threads
- 1.5" NPS threaded brackets fit standard pole infrastructure without adapters
- Compatible with Axis P4705-PLVE and P4707-PLVE panoramic camera models
- Pendant form factor allows flexible mounting angles for optimal coverage positioning
In stock · Usually Ships Same Business Day

$73.00 $70.99 Save $2.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01172-001

Axis T94P01L Recessed Mount for M55 Series - 01172-001

Recessed mount for M55 series cameras, indoor/outdoor rated
- Metal construction with 3/4" (M25) conduit hole for cable routing
- UL-approved and air-handling spaces compliant for regulated environments
- Flush-mounted design integrates with AXIS M55 Series surveillance cameras
In stock · Usually Ships Same Business Day

$119.00 $114.99 Save $4.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 5507-591

Axis T94Q01F Ceiling-and-Column Mount - 5507-591

Dual ceiling/column mount for Axis box cameras with post-install swivel
- Powder-coated aluminum resists corrosion in outdoor and salt-spray environments
- Single mount handles both ceiling/soffit and column/parapet orientations
- Integrated weatherproof cable routing protects connectors from moisture and UV
In stock · Usually Ships Same Business Day

$129.00 $124.99 Save $4.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5506-671

Axis T94U02S Mounting Bracket for Q3505-SVE - 5506-671

Stainless steel bracket with weatherproof gasket for Q3505-SVE outdoor mounting
- Pre-installed gasket seals against moisture and contaminants in outdoor environments
- Stainless steel construction resists corrosion in harsh surveillance installations
- Precision-fitted design for Axis Q3505-SVE camera secure positioning and alignment
Special Order · Usually Ships in 2-3 Weeks

$189.00 $182.99 Save $6.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-911

Axis T94V01S Mounting Bracket Q36 Series - 5801-911

Mounting bracket for AXIS Q36 Series cameras with weather-resistant construction
- Designed specifically for Q36 Series network cameras with straightforward installation
- Weather-resistant materials built to withstand diverse indoor and outdoor environments
- Includes mounting bracket and all hardware needed for quick deployment
Special Order · Usually Ships in 2-3 Weeks

$52.00 $49.99 Save $2.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-541

Axis T94X01A Wall Mount for T92F10 Housing - 5801-541

Wall mount for T92F10 housing with 360° pan / 90° tilt positioning
- 15 kg load capacity with powder-coated aluminum for indoor/outdoor use
- 360° pan and 90° tilt rotation for comprehensive camera angle adjustment
- Back, side, and top cable routing paths for flexible wall installations
Special Order · Usually Ships in 2-3 Weeks

$169.00 $163.99 Save $5.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5801-551

Axis T94Y01G Pole Mount - 5801-551

Pole mount for 25 kg cameras in indoor/outdoor surveillance setups
- 25 kg load capacity handles mid-size Axis cameras with stability
- Powder-coated aluminum resists corrosion and UV for outdoor durability
- Back-routed cable management keeps wiring clean and protected
Special Order · Usually Ships in 2-3 Weeks

$189.00 $182.99 Save $6.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 5800-351

Axis T98A Stainless Steel Mounting Plate - 5800-351

Stainless steel mounting plate for AXIS T98A-VE cabinet series
- Stainless steel construction resists corrosion in outdoor installations
- Engineered for secure, stable mounting of T98A-VE surveillance cabinets
- Supports both indoor and outdoor surveillance infrastructure deployments
Special Order · Usually Ships in 2-3 Weeks

$73.00 $70.99 Save $2.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01181-001

Axis T99 Illuminator Bracket Kit A - 01181-001

Dual T90 illuminator bracket for Q8685-E and T99A10 positioning systems
- Mounts two T90 white-LED or IR-LED illuminators for coordinated low-light coverage
- Professional bracket with integrated cable glands, connectors, and management ties
- Complete hardware kit includes fitting brackets, screws, washers, and connectors
Special Order · Usually Ships in 2-3 Weeks

$229.00 $221.99 Save $7.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 03092-001

Axis TA4602 Recessed Wall-Mount Back Box - 03092-001

Recessed wall-mount back box for concealed access control termination
In stock · Usually Ships Same Business Day

$37.00 $35.99 Save $1.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Axis T94B03L Recessed Mount Bullet Cameras - 5801-861

Axis T94D02S Curved Mount Bracket White 10 pcs - 5504-921

Axis T94F01D Pendant Kit Accessory - 5503-881

Axis T94J01A Wall Mount Grey - 01445-001

Axis T94M01D Outdoor Pendant Mount Kit - 5505-091

Axis T94N01G Stainless Steel Pole Mount - 5901-341

Axis T94N02D Pendant Kit Pole Mount - 02076-001

Axis T94P01L Recessed Mount for M55 Series - 01172-001

Axis T94Q01F Ceiling-and-Column Mount - 5507-591

Axis T94U02S Mounting Bracket for Q3505-SVE - 5506-671

Axis T94V01S Mounting Bracket Q36 Series - 5801-911

Axis T94X01A Wall Mount for T92F10 Housing - 5801-541

Axis T94Y01G Pole Mount - 5801-551

Axis T98A Stainless Steel Mounting Plate - 5800-351

Axis T99 Illuminator Bracket Kit A - 01181-001

Axis TA4602 Recessed Wall-Mount Back Box - 03092-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading