Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Altronix
SKU: RBTUL
Altronix RBTUL Ultra-Sensitive Relay Module SPDT
Ultra-sensitive 1A SPDT relay module for 12/24VDC security systems
- Ultra-sensitive SPDT relay for security sensor triggers
- Minimal input current — no buffering required
- 1A @ 28VDC contact rating for low-power loads
$34.21 $33.99 Save $0.22The item has been added -
Altronix
SKU: RBUL
Altronix RBUL Ultra-Sensitive Relay Module 12/24VDC
Ultra-low 30mA relay module for 12/24VDC access control & alarms
- Selectable 12/24VDC input lets one SKU cover mixed-voltage sites without extra stock.
- 30mA operating current reduces power supply load on long runs and auxiliary circuits.
- SPDT output supports energize-to-activate or fail-safe logic; switches 1A @ 28VDC.
$20.94 $19.99 Save $0.95The item has been added -
Altronix
SKU: RDC48
Altronix RDC48 48VDC DIN Rail Relay Module
48VDC DIN rail relay module with DPDT switching for security control
- DPDT contacts switch two independent circuits simultaneously, supporting failsafe and failopen paths.
- 10A per pole handles lock solenoids and motorized strikes without additional relay staging.
- Native 48VDC input mounts directly on 35mm DIN rail—no voltage conversion or bracket adapters needed.
$35.94 $34.99 Save $0.95The item has been added -
Altronix
SKU: ST3
Altronix ST3 6-Output Timer Relay Module
6-output timer relay module for multi-device switching on Altronix snap track
- Six independent timed relay outputs let you sequence gates, locks, and lighting from one module.
- Mounts directly on Altronix SMP3, SMP5, or AL624 snap track—no separate enclosure required.
- Lifetime warranty on a US-made unit measuring 3 × 3.7 × 2 in and weighing 0.45 lb.
$11.59 $0.99 Save $10.60The item has been added -
Add to Cart The item has been addedAxis
SKU: 01706-001
Axis 01706-001 Male Coupler 1.5" NPS/NPT
1.5" male coupler connects modern Axis pendant kits to legacy mounts
- 1.5" NPS/NPT male thread fits existing female ports on older infrastructure
- Aluminum with black anodized finish resists corrosion in humid or coastal environments
- Included lock nut prevents vibration loosening during operation
In stock · Ships same business day$52.00 $51.99 Save $0.01The item has been added -
Axis
SKU: 02380-001
Axis 02380-001 Network Sound Projector
Network speaker with PoE power, IK10 vandal rating, -40 to +55°C outdoor operation
- Two-way audio with built-in mic and DSP-tuned voice clarity for announcements
- IK10 housing withstands 20-joule impacts in high-risk or public-access locations
- Single PoE+ cable eliminates separate power supply; web-based management, no server
$919.00 $890.99 Save $28.01The item has been added -
Axis
SKU: 02533-001
Axis 02533-001 TA4401 Braille Label Accessory
$179.00 $173.99 Save $5.01The item has been added -
Axis
SKU: 02771-001
Axis 02771-001 TQ1919-E IR Illuminator Kit
- 940nm invisible IR illuminator kit pairs with 1 MP Axis cameras
- IP66/IP67 plus IK10 vandal-rated housing for outdoor installs
- No visible IR spillover - covert nighttime surveillance illumination
$159.00 $153.99 Save $5.01The item has been added -
Axis
SKU: 03466-001
Axis 03466-001 TD2903-E Cable Kit - An accessory kit that allows
- Cable extension kit for Axis TD2903-E thermal detector installs
- Adds reach from sensor mount point to junction box termination
- Maintains conductor gauge for extended thermal sensor cable runs
$129.00 $124.99 Save $4.01The item has been added -
Axis
SKU: 03536-001
Axis 03536-001 Electrical Safety Kit A 120 V AC, available for your AXIS
$199.00 $192.99 Save $6.01The item has been added -
Axis
SKU: 03537-001
Axis 03537-001 Electrical Safety Kit B 230V AC
$199.00 $192.99 Save $6.01The item has been added -
Axis
SKU: 5505-341
Axis 5505-341 T92E Camera Change Kit
- Camera change kit for swapping into existing AXIS T92E enclosures
- Maintains existing mount geometry and power supply during model swap
- Wall, ceiling, pole, or pendant mount - 5-year warranty included
$52.00 $51.99 Save $0.01The item has been added -
Axis
SKU: 0831-001
Axis A9188-VE Network I/O Relay Module - 0831-001
Network I/O relay module with 8 inputs, 8 relays, IP66 sealed
- 8 configurable inputs and 8 Form C relays for sensor integration and device control
- PoE+ or 12/24 V DC power eliminates dedicated wiring constraints
- IP66 enclosure rated for outdoor and harsh-environment deployments
$1,019.00 $953.99 Save $65.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02862-001
Axis A9910 I/O Relay Expansion Module - 02862-001
PoE I/O relay module with 8 supervised ports and 4 Form C relays
- 8 supervised I/O ports detect open/short and tamper conditions instantly
- 4 Form C relays handle wet and dry contact switching for locks and gates
- 4 Modbus sensor ports integrate temperature and humidity monitoring directly
In stock · Ships same business day$319.00 $308.99 Save $10.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01765-001
Axis I/O Indication LED Red - 01765-001
Red I/O LED indicator for real-time recording status on Axis cameras
- Compact form factor mounts discreetly on ceiling or wall in tight spaces
- I/O port connection—no separate power supply or networking required
- IP65-rated for healthcare, retail, and transportation surveillance compliance
In stock · Ships same business day$73.00 $70.99 Save $2.01The item has been added -
Axis
SKU: 01534-001
Axis P1375-E Fixed Box IR Illuminator Kit - 01534-001
50m IR illuminator for AXIS P1375-E box camera, PoE powered
- 50-meter IR range with 850nm optimized lighting for complete darkness
- PoE powered directly from camera—no auxiliary power supply required
- IP67 rated, IK10 impact resistant fixed box design with mounting bracket
$119.00 $114.99 Save $4.01The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.