Posiflex · APEX-CAM-01

Posiflex APEX-CAM-01 Camera 5MP 1920 x 1080 Camera Housing

• 5MP sensor delivers 1920×1080 resolution for clear face-level transaction verification.
• USB interface simplifies integration into existing Posiflex APEX-series POS terminals.
• Bezel-mount housing eliminates cabling runs and holds aim in high-traffic checkout lanes.

Speco Technologies · VCH401HBMT

Speco Technologies VCH401HBMT Traditional Camera Housing with Hea

IP66 outdoor housing with integrated heater and blower for year-round protection

• IP66-rated enclosure blocks dust and moisture for reliable outdoor perimeter deployments.
• Integrated heater and blower prevent condensation and sensor fogging in cold climates.
• Runs on 24VAC, fitting standard low-voltage surveillance power infrastructure.

Speco Technologies · WMID8

Speco Technologies WMID8 Wall Mount for Ultra Intensifier Housing

Wall mount for Ultra Intensifier housing in fixed surveillance setups

• Direct-fit bracket for Speco Ultra Intensifier housing simplifies wall-mount deployments.
• At 1.5 lb and 9.5 × 8.4 × 4.4 in, it installs cleanly in tight or retrofit spaces.
• White powder-coated finish suits indoor and outdoor fixed-position surveillance installs.

STI · KIT-M05101-EN

STI KIT-M05101-EN Red Housing Stopper II Series Fire Label

Red polycarbonate protective housing from STI's Stopper II Series, designed to prevent false alarms and tampering on fire alarm call points and

• Red polycarbonate housing prevents accidental or malicious fire call point activation.
• Optional integral sounder emits 120 dB alert when cover is lifted without authorization.
• Fits internal and external installations; mounts via four holes drilled with a 7mm bit.

STI · KIT-M06540-CR

STI Red Replacement Housing for Universal - KIT-M06540-CR

Red replacement housing engineered for Universal Stopper series locks and strikes

• Direct mechanical fit for Universal Stopper locks and strikes — no rewiring required.
• Runs on 9VDC, matching existing strike circuits with no power supply upgrade needed.
• Red color-coding enforces zone identification across multi-door or multi-building installs.

STI · STI-13300NC

STI STI-13300NC Universal Stopper Intercom without Horn Housing

Two-way intercom for Universal Stopper access control, 24VDC flush mount

• 24VDC powered, integrates with standard access control power infrastructure
• Flush back box mounting keeps profile low and housing protected from impact
• Two-way audio communication compatible with Universal Stopper door systems

STI · STI-7515A

STI STI-7515A Access Control Housing

Lock/strike housing designed for access control system installations

• Dedicated lock/strike housing simplifies strike mechanism deployment in access control installs.
• Pre-marked hole locations streamline door frame modifications and electrical routing planning.
• Compatible with standard commercial lock/strike configurations for hardwired strike activation.

STI · STI-7515F

STI STI-7515F Access Control Housing

Lockable polycarbonate enclosure designed to protect access control lock, strike, and keypad assemblies from vandalism, accidental damage, and

• 94V-2 rated polycarbonate resists impact while keeping the protected device visible.
• Operates from -40°C to +121°C, covering outdoor and unheated industrial installs.
• Ships with mounting hardware and gaskets; integrates with STI-7510/7511 housings.

STI · STI-14200NY

STI Universal Stopper® Low Profile without Horn Housing, Surface Mo...

Low-profile surface-mount intercom stopper for 24VDC access control

• Surface-mount installation on door frames without recessed cavity needs
• 24VDC operation integrates into existing access control infrastructure
• Low-profile design maintains discreet appearance in security deployments

STI · STI-13200NC

STI Universal Stopper® without Horn Housing - STI-13200NC

Surface-mount intercom station, 24VDC, clear dome for access control

• IP56-rated clear dome enclosure fits door and wall installations discreetly
• 24VDC operation integrates with STI Universal Stopper system architecture
• Low-profile design supports retail, commercial, and institutional deployments

STI · STI-13500NB

STI Universal Stopper® without Horn Housing, Enclosed Back Box, Op...

24VDC intercom for entry gates and access points, no horn housing

• Enclosed back box design protects wiring and components at installation
• 24VDC powered operation integrates into standard access control systems
• IP54 rated for reliable performance in outdoor and semi-exposed locations

STI · STI-13400NB

STI Universal Stopper® without Horn Housing, Enclosed Back Box, Sea...

Compact 24VDC intercom for STI access control systems

• Enclosed back box design fits recessed or wall-mounted installations
• 24VDC operation integrates into standard security infrastructure
• IP54-rated for use at entry points and facility access checkpoints

STI · STI-13000NC-FR

STI Universal Stopper® without Horn Housing, Flush, Clear - French

Flush-mount TCP/IP intercom stopper, 24VDC, clear housing

• TCP/IP network integration for access control and two-way communication
• Flush mount design fits discrete installations with low-profile dome form
• 24VDC powered with IP56 rating for standard security infrastructure

STI · STI-13200NY

STI Universal Stopper® without Horn Housing, Surface Mount, No Label

Surface-mount intercom for 24VDC access control without horn housing

• 24VDC operation integrates into standard security and intercom networks
• Compatible with external speakers and amplified audio systems
• IP54-rated surface mount design for access control applications

TSC · SP-COM-0007

TSC SP-COM-0007 Wi-Fi Slot-In Inkjet Printer Housing

Wi-Fi inkjet slot-in housing with 600 DPI for label and receipt printing

• 600 DPI inkjet resolution produces sharp barcodes and QR codes without ribbon overhead.
• Wi-Fi connectivity eliminates Ethernet cabling, simplifying deployment and repositioning.
• Slot-in housing integrates into existing kiosk or POS equipment with no custom mounting.

Valcom · V-SMR12A

Valcom V-SMR12A Surface Mount Housing 12" Analog Clock

Surface mount 12" analog clock housing for retrofit wall installation

• Surface mount housing for 12-inch wired analog clock retrofit
• Clean install integration in existing facility infrastructure
• 3.15 lb wall-mount housing ring made in the United States

Vivotek · AE-238-wBS

Vivotek AE-238-wBS Outdoor Weatherproof Camera Housing Heater & Blower

Weatherproof box camera housing with integrated heater & fan for -20°C to 65°C

• 10W heater prevents lens fog; 2W fan manages heat in temps up to 65°C
• IP68 waterproof and IK10 vandal-rated cast aluminum for outdoor durability
• 24VAC/VDC input with dual 24V AC/DC and 12V DC outputs; 30W max power

Vivotek · AE-239-wBS

Vivotek AE-239-wBS Outdoor Vandal-Proof Camera Housing

Cast aluminum housing with IP68/IK10 for extreme outdoor surveillance

• IP68 waterproof + IK10 impact rated; survives full submersion and vandal strikes
• Auto heater (10W, ≤30°C) and fan (≥40°C) maintain lens clarity and thermal stability
• PoE 802.3 input powers camera + climate control on single 30W max budget

Vivotek · AE-23A-P

Vivotek AE-23A-P Fixed Outdoor Enclosure

IP68 cast aluminum enclosure with IK10 impact resistance for outdoor cameras

• IP68 sealing blocks dust, moisture, and water ingress for continuous outdoor uptime.
• IK10 vandal rating withstands physical impact, securing cameras in high-risk perimeter zones.
• Integrated demister heater and active cooling fan maintain image quality across temperature extremes.

Vivotek · AE-23E-v2

Vivotek AE-23E-V2 Outdoor Weatherproof Heated PoE Housing

IP68 + IK10 outdoor housing with auto-heated window for year-round PoE cameras

• IP68 waterproof and IK10 vandal-proof cast aluminum protects in extreme conditions
• 10W window heater + cooling fan auto-activate between –20°C to 65°C operating range
• PoE 802.3bt single-cable power (50–57VDC) with wall, ceiling, corner, or pedestal mount

Vivotek · AE-23L

Vivotek AE-23L Outdoor Camera Housing

IP68 cast aluminum housing with IK10 vandal protection for outdoor cameras

• IP68 waterproof rated for complete dust and water immersion protection
• IK10 impact-rated cast aluminum resists vandalism in high-risk deployments
• Integrated heater and dual fans maintain operation from -20°C to 65°C

Vivotek · AE-243-wBS

Vivotek AE-243-WBS Heated Blower Outdoor IR Housing

Heated outdoor housing with 6W IR, IP68/IK10 rated for -20°C to 65°C

• Auto-switching heater and fan maintain lens clarity across extreme temperature swings
• 6W fixed IR LED delivers 50m night vision range at 25° angle for perimeter coverage
• IP68 waterproof and IK10 impact-rated cast aluminum housing fits all Vivotek box cameras

Vivotek · AE-244-wBS

Vivotek AE-244-WBS Heated Blower Outdoor IR Housing

Outdoor IR housing with heated blower for Vivotek box cameras, -20°C to 65°C

• IP68 waterproof, IK10 vandal-proof cast aluminum withstands harsh weather
• Auto-heated window and cooling fan maintain lens clarity in extreme temps
• 50m IR LED night vision with PoE and DC 12V dual power connectivity

Vivotek · AE-510

Vivotek AE-510 Stainless Steel Camera Housing

IP68 stainless steel housing for cameras in coastal and industrial sites

• IP68 and IK10 ratings ensure complete ingress protection and impact resistance outdoors.
• Integrated window heater and thermal fan maintain operation across -20°C to 65°C.
• Stainless steel construction resists corrosion and salt spray in marine and industrial sites.

Vivotek · AE-510-I

Vivotek AE-510-I Stainless Steel Camera Enclosure

IP68 stainless steel enclosure with active thermal control for coastal & industrial sites

• 12W VAIR system with heater and cooling fan maintains -20°C to +50°C operation
• Stainless steel construction resists salt spray, corrosion, and chemical vapors
• IP68 sealing and integrated sunshield protect camera from dust, water, and glare

Vivotek · AI-104-010

Vivotek AI-104-010 External Infrared LED Illuminator

850nm IR illuminator with 100m range and 10° beam for night surveillance

• 100-meter illumination reach with tight 10-degree beam angle for focused coverage
• Dual power input (24VAC or 12-24VDC) with IP66 weatherproof and IK10 impact rating
• 850nm invisible spectrum operates -40°C to 50°C without visible light spillover

Vivotek · AI-104-035

Vivotek AI-104-035 850nm IR LED Illuminator

850nm IR illuminator with 25m range and 35° beam for night surveillance

• 850nm IR illumination covers up to 25m at 35° beam angle for focused night imaging.
• IP66 and IK10 ratings support outdoor deployment in harsh or vandal-prone environments.
• Accepts 24VAC or 12–24VDC input at 24W, simplifying integration into existing power runs.

Zebra · P1080383-600

Zebra P1080383-600 Battery Base Housing for ZD420/ZD620

Replacement battery base housing for Zebra ZD420/ZD620 printers

• OEM replacement housing restores battery integration on ZD420/ZD620 without full printer swap.
• Supports 2750mAh battery configurations to maintain extended runtime in field deployments.
• Field-replaceable design lets technicians restore power module seating quickly on-site.

Zebra · P1080383-601

Zebra P1080383-601 Battery Base Housing for ZD420/ZD620

Replacement battery base housing for Zebra ZD420/ZD620 thermal printers

• OEM replacement housing restores battery operation on ZD420/ZD620 without reconfiguration.
• 2750mAh capacity sustains continuous thermal print cycles in warehouse and logistics deployments.
• Drop-in compatibility with existing ZD-series firmware eliminates downtime during field replacement.

Zebra · P1080383-602

Zebra P1080383-602 Battery Base Housing Kit

Drop-in 2750mAh battery housing for Zebra ZD410 mobile printers

• Drop-in replacement housing fits ZD410 mobile printers with no modification required.
• Secures 2750mAh battery modules, supporting extended shift printing in high-mobility deployments.
• Protective enclosure keeps battery assemblies stable on carts, belts, and multi-zone environments.

Zebra · P1117258-235

Zebra P1117258-235 Battery Housing Kit for ZD411 ZD611

OEM battery housing for Zebra ZD411 and ZD611 desktop printers

• OEM part ensures dimensional and electrical compatibility with ZD411/ZD611 printers.
• Direct-fit replacement requires no adapters or modifications, reducing downtime.
• 1-year warranty backs this battery base housing for reliable maintenance cycles.