Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
STI
SKU: STI-9645
STI STI-9645 Emergency Light Damage Stopper
- Wire cage shields emergency light heads and sensors from impact in high-traffic areas.
- Mounts to walls or ceilings via six 1/4-inch anchor points on drywall or concrete.
- All hardware included — six anchors and six 1-1/2-in screws; only a drill required.
$102.86 $101.99 Save $0.87The item has been added -
STI
SKU: STI-9649
STI STI-9649 Emergency Light Damage Stopper
- Protective cage shields emergency light fixtures from impact in high-traffic areas.
- Mounts via six anchor points using included #10 anchors and 1.5-inch Phillips screws.
- Sized for standard surface-mount emergency lights in commercial and institutional installs.
$143.80 $142.99 Save $0.81The item has been added -
STI
SKU: STI-9664
STI STI-9664 Beacon & Sounder Damage Stopper
- 9-gauge steel wire cage shields beacons and sounders from vandalism and impact.
- Polyester corrosion-resistant coating ensures durability in controlled indoor use.
- Mounts to wall or ceiling with included fasteners — no wiring changes required.
$33.02 $32.99 Save $0.03The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-9665
STI STI-9665 Beacon & Sounder Damage Stopper
- 9-gauge polyester-coated steel cage shields sounders from impact and vandalism.
- Preserves full audio and visual output of protected beacon or sounder units.
- Includes mounting screws and anchors; installs with a standard screwdriver only.
$33.02 $32.99 Save $0.03The item has been added -
STI
SKU: STI-9701
STI STI-9701 Wire Guard Damage Stopper Protector
- 9-gauge steel web-lined cage shields smoke detectors from abuse
- Patented design for institutional, school, and detention environments
- Hinged fasteners let crews service detectors without removing cage
$46.98 $45.99 Save $0.99The item has been added -
STI
SKU: STI-9703
STI STI-9703 Light Damage Stopper® Door Strike
- Operates on 12V or 24V DC, fitting directly into standard access control circuits.
- Fits door frames from 1-3/8" to 2-1/4", covering most commercial single-door deployments.
- Six-anchor mount installs with a standard 1/4" drill bit; hardware included.
$49.52 $48.99 Save $0.53The item has been added -
STI
SKU: STI-9706
STI STI-9706 Beam Smoke Damage Stopper Flush Mount Controller
Flush mount controller for STI beam smoke detection systems
- Fits standard electrical boxes via flush mount using four H19020 clamps and #10 screws.
- Compatible with STI and System Sensor beam units for multi-zone smoke detection layouts.
- Center cutout measures 5.50" × 4.00"; overall unit is 9.62" × 10.32" for planning.
$74.17 $73.99 Save $0.18The item has been added -
STI
SKU: STI-9707
STI STI-9707 Beam Smoke Damage Stopper Surface Mount Controller
Surface mount controller for beam smoke detection and fire safety
- Mounts to surface conduit at any of 12 standard anchor locations—no conduit rerouting.
- Secures with four H19020 clamps and four #10×1.5" screws included in the package.
- Guards System Sensor beam transmitters and reflective mirrors from impact damage.
$76.90 $75.99 Save $0.91The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-9712
STI STI-9712 Steel Web Stopper for Photoelectric Smoke Detector
Patented steel web stopper shields photoelectric smoke detectors from tampering
- Patented steel web lock physically blocks detector removal and lens obstruction.
- Smoke entry and airflow remain unobstructed, preserving full detection sensitivity.
- Mounts to wall or ceiling at 4.62"×5.37"×3" with standard fasteners included.
$55.61 $54.99 Save $0.62The item has been added -
STI
SKU: STI-9713
STI STI-9713 Steel Web Stopper for Photoelectric Smoke Detector
Steel web protector for photoelectric smoke detectors in high-abuse areas
- 9-gauge steel web construction resists intentional damage in high-abuse environments.
- Rated -40° to 212°F with LLDPE coating; 304 SS variant supports washdown areas.
- Tool-free removal preserves routine detector maintenance without special procedures.
$47.62 $46.99 Save $0.63The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-9729
STI STI-9729 Wire Guard Damage Stopper
- Hard-drawn 9-gauge steel construction resists impact damage to lock and strike hardware.
- Fits standard mortise and cylindrical locks for retrofit or new commercial installations.
- Powder-coated in sky white; mounts with four 1/4-inch holes drilled 1.5 inches deep.
$91.44 $90.99 Save $0.45The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-9730
STI STI-9730 Wire Guard Damage Stopper
- 421 × 315 mm cage shields lock and strike assemblies from physical damage.
- Six-point anchor fixation delivers rigid, tamper-resistant mounting on solid surfaces.
- Universal fit supports electric strikes and magnetic locks without wiring modification.
$141.80 $140.99 Save $0.81The item has been added -
STI
SKU: STI-9730-BK
STI STI-9730-BK Wire Guard Damage Stopper Black
- Shields access control, bell wire, and sensor cables from cuts and crush damage.
- Mounts via 6 anchor points using included #10 × 1-1/2" Phillips pan-head screws.
- Fits conduit and bundled runs in walkways, mechanical rooms, and construction zones.
$141.80 $140.99 Save $0.81The item has been added -
STI
SKU: STI-9731
STI STI-9731 Wire Guard Damage Stopper
- 9-gauge hard-drawn steel cage shields lock cylinders and strikes from impact damage.
- Powder-coated sky white finish resists corrosion in high-traffic door environments.
- Mounts over any mortise or cylindrical lock with four anchor points; no power needed.
$116.73 $115.99 Save $0.74The item has been added -
STI
SKU: STI-9731-BK
STI STI-9731-BK Wire Guard Damage Stopper Black
Black wire guard stops cable crushing, pinching, and abrasion damage
- Shields cable bundles from crushing, pinching, and abrasion in high-traffic zones.
- Mounts to any wall surface using six included anchors and pan-head screws.
- Covers standard cable gauges across access control, intercom, and reader wiring runs.
$116.73 $115.99 Save $0.74The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-9732
STI STI-9732 Wire Guard Damage Stopper
- 9-gauge hard-drawn steel construction resists impact and vandalism at high-traffic entry points.
- Polyester powder coat finish in sky white provides corrosion resistance for long-term durability.
- Mounts over standard lock and strike assemblies using conventional 1/4" anchors—no special tools needed.
$183.73 $182.99 Save $0.74The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.