STI STI-9706 Beam Smoke Damage Stopper Flush Mount Controller
Overview
The STI-9706 is a flush mount controller for beam smoke detection systems. It mounts into standard electrical boxes and manages beam smoke detection logic within fire safety and building automation networks. Deploy this in facilities requiring coordinated smoke detection across multiple zones where the detector unit sits in an existing surface mount or flush mount electrical conduit infrastructure.
Compatibility
The STI-9706 works with STI beam smoke detection equipment, including System Sensor beam units. It integrates into fire alarm and building control systems that support distributed smoke detection. The flush mount form factor fits standard electrical boxes used in commercial, institutional, and industrial facilities with multi-zone smoke detection layouts.
Installation Notes
Mount the STI-9706 using the four provided H19020 clamps and #10 × 1.5 inch screws. The controller accommodates existing electrical conduit systems and can be installed on the side or top/bottom of the mounting surface. Center cutout dimensions are 5.50 inches (140mm) wide × 4.00 inches (102mm) tall; overall dimensions are approximately 9.62 inches (244mm) wide × 10.32 inches (262mm) tall. Ensure both the transmitter and reflective mirror are perfectly aligned and tested before final installation. Periodic cleaning of the beam guard prevents dust and debris buildup that degrades detection reliability.
What's in the Box
- 1x STI-9706 Flush Mount Controller
- 4x H19020 Clamps
- 4x #10 × 1.5 inch Screws
