Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
Add to Cart The item has been addedSTI
SKU: KIT-M10197H
STI KIT-M10197H Stopper Station Replacement Contact Holder
- Direct replacement for STI Stopper Station readers; avoids full unit swap.
- Runs on 9VDC from existing door control wiring — no separate power supply needed.
- Supports HID credential platforms for drop-in retrofit on contact-based installations.
$5.99The item has been added -
STI
SKU: KIT-RPK
STI KIT-RPK Reset Replacement Key for ReSet Call Points
- Direct mechanical replacement for lost or worn ReSet call point keys, no rewiring needed.
- Compatible with STI ReSet call point systems operating at 9VDC for seamless integration.
- Passive mechanical component allows fast key swap with no active power draw or tools required.
$9.40 $8.99 Save $0.41The item has been added -
STI
SKU: KIT-SA505
STI KIT-SA505 Key Switch Mounting Bracket for SA5000 Series
Wall-mount bracket for SA5000 series key switch readers, 9VDC HID
- Designed for SA5000 series key switch readers with HID credential support
- Operates at 9VDC for integration into door access control systems
- Wall-mounted bracket enables secure, repeatable installation across sites
$24.68 $23.99 Save $0.69The item has been added -
STI
SKU: KIT-UB-1C
STI KIT-UB-1C Contact Assembly for UB-1
- Direct replacement contact assembly restores UB-1 strike function without full unit swap.
- Operates at 9VDC, matching standard UB-1 panel supply requirements for drop-in wiring.
- Compatible exclusively with STI UB-1 lock/strike systems, ensuring verified fit and function.
$44.28 $43.99 Save $0.29The item has been added -
STI
SKU: LT-1UL
STI LT-1UL UL Latching/Timer Module
- Provides deterministic latching and timed release control for 9VDC magnetic lock strikes.
- Coordinates strike energization across multi-reader vestibule and mantrap door sequences.
- UL-rated module integrates directly with access controller strike relay outputs.
$71.99The item has been added -
STI
SKU: STI-7533MED
STI MED Protective Cabinet - Polycarbonate with Wire Rack, Siren Al...
Polycarbonate protective cabinet with siren alarm for medical facilities
- Polycarbonate construction with integrated wire rack for organized mounting
- 9VDC siren alarm function for integrated audible alerting capability
- Wall and panel mountable enclosure for access control equipment protection
$544.52 $360.99 Save $183.53The item has been added -
STI
SKU: STI-1212
STI Open Back Box for Stopper® Dome series - STI-1212
- Polycarbonate enclosure shields fire alarm devices from tampering and accidental use.
- Four-point fixed frame mounts over existing Stopper® Dome units with no device modification.
- Compatible with STI-1200, STI-1230, STI-1100, and STI-1130 Stopper® Dome models.
$28.11 $27.99 Save $0.12The item has been added -
STI
SKU: KIT-G92099
STI Optional gasket for series - KIT-G92099
- Seals STI-6520/6521/6522 lock bodies against moisture, dust, and direct spray.
- Prevents water ingress at cable entry and mounting points in outdoor deployments.
- Requires 7mm masonry bit for wall installs; blank unused cable holes to maintain seal.
$11.75 $10.99 Save $0.76The item has been added -
STI
SKU: KIT-71100A-E
STI Orange Back Box Kit for Stopper® Station - KIT-71100A-E
- Surface-mount back box adds enclosure depth for cable entry and strain relief.
- Runs at 9VDC, integrating directly with standard low-voltage access control panels.
- Compatible with STI Stopper® Station models STI-1100 through STI-3150 series.
$14.10 $13.99 Save $0.11The item has been added -
STI
SKU: STI-7511B
STI Polycarbonate Enclosure with Enclosed Back Box & - STI-7511B
- UV-stabilized polycarbonate housing rated for −40°F to 250°F suits indoor and outdoor installs.
- Enclosed back box provides dedicated cable routing depth for clean wiring on double-gang readers.
- Tamperproof mounting screws and clear visibility protect credential readers from vandalism.
$81.74 $80.99 Save $0.75The item has been added -
STI
SKU: STI-7510B
STI Polycarbonate Enclosure with Enclosed Back Box & Double-Gang El...
Double-gang polycarbonate strike enclosure for indoor and covered outdoor
- Enclosed back box design with dual-gang mounting for secure access control
- Polycarbonate construction rated for covered outdoor environments and weather
- Wall-mounted configuration compatible with standard electronic strike systems
$81.74 $80.99 Save $0.75The item has been added -
STI
SKU: STI-7511F
STI Polycarbonate Enclosure with Enclosed Back Box - STI-7511F
- Transparent polycarbonate cover shields strike hardware while keeping components visible.
- Rated for outdoor use and operates from −40°F to +250°F for harsh environment installs.
- Pre-drilled hole locations simplify surface mounting alignment with existing frame prep.
$89.40 $88.99 Save $0.41The item has been added -
STI
SKU: STI-7510A-OW
STI Polycarbonate Enclosure with Enclosed Deep - STI-7510A-OW
- 94V-2 polycarbonate housing rated −40°F to 250°F suits indoor and outdoor installs.
- UL-recognized for Type 3R industrial control panels, supporting code-compliant deployments.
- Ships complete with deep white back box, gaskets, and mounting hardware for faster installs.
$127.59 $126.99 Save $0.60The item has been added -
STI
SKU: STI-7511A-OW
STI Polycarbonate Enclosure with Enclosed Deep - STI-7511A-OW
- Polycarbonate cover rated 94V-2 protects strike hardware from vandalism and weather.
- Operates from −40°F to 250°F, supporting indoor and outdoor door frame installations.
- Ships with gaskets, spacers, integrated hinge, and mounting hardware for fast deployment.
$127.59 $126.99 Save $0.60The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-7511A
STI Polycarbonate Enclosure with Enclosed Deep Back - STI-7511A
- NEMA 4 polycarbonate housing withstands wet, corrosive, and dusty outdoor environments.
- Operates from −40°F to 250°F, covering freezers, unheated warehouses, and harsh exteriors.
- Accepts 12, 16.5, or 24 VAC/VDC, fitting standard access control reader power configurations.
$89.40 $88.99 Save $0.41The item has been added -
STI
SKU: STI-7510A
STI Polycarbonate Enclosure with Enclosed Deep Back Box and Exterio...
NEMA 4 polycarbonate enclosure for outdoor access control
- Deep back box design accommodates strikes, locks, and reader assemblies
- NEMA 4 rating protects against water spray, dust, and corrosion
- Wall-mount polycarbonate construction rated IP59 for harsh environments
$89.40 $88.99 Save $0.41The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.