Connectivity & Media
Sub categories
Showing Results for Connectivity & Media
-
Cradlepoint
SKU: TAA-170767-000
Cradlepoint Inc TAA-170767-000 COR Extensibility Cable
Industrial COR extensibility cable with TAA compliance for secure deployments
- COR extensibility cable with SATA-DB9 connectivity
- Industrial-grade build for harsh edge deployments
- TAA-compliant for federal network infrastructure
$99.99The item has been added -
Cradlepoint
SKU: TAA-MB05-19005GB-GA
Cradlepoint TAA-MB05-19005GB-GA 5-Year TAA Compliant Mobile Cable
TAA-compliant Gigabit mobile cable with Bluetooth 5.2 for federal procurement
- Mobile cable rated for Gigabit speeds in vehicle installs
- Bluetooth 5.2 embedded for accessory pairing
- 5-year TAA-compliant build for federal fleet contracts
$2,999.00 $2,688.99 Save $310.01The item has been added -
Custom America POS
SKU: 26300000000579
Custom America POS 2-pin molex power cable for - 26300000000579
- 2-pin Molex DC power cable for Custom America POS hardware
- Locking connector prevents accidental disconnect in service
- Commercial-grade build for continuous-duty POS environments
$13.50 $12.99 Save $0.51The item has been added -
Custom America POS
SKU: 26500000000352
Custom America POS 6' serial cable 9-pin male - 26500000000352
- 6 ft serial cable with 9-pin DB-9 male-to-female ends
- For Custom America VKP80II, VKP80III, and KPM216HIII
- Standard RS-232 connection for POS peripheral hookup
$16.50 $15.99 Save $0.51The item has been added -
Custom America POS
SKU: 26300000000602
Custom America POS NPE Pcba Sensor Cable - 26300000000602
- 50 ft NPE PCBA sensor cable for KPM216HII printer hosts
- Long-run cable for warehouse and POS sensor integration
- Connects sensor modules to host controllers at distance
$15.25 $14.99 Save $0.26The item has been added -
Custom America POS
SKU: 26600000000024
Custom America POS Power cable for the TG02H - 26600000000024
- Power cable for Custom America TG02H payment terminal
- Delivers primary power to TG02H terminal hardware
- Direct replacement when original cable degrades or fails
$15.52 $14.99 Save $0.53The item has been added -
Custom America POS
SKU: 26900000000026
Custom America POS Serial Adaptor Cable RJ45-DB9 - 26900000000026
- RJ45 to DB9 serial adaptor cable for legacy RS-232 devices
- Passive adapter — no power or driver required at the host
- Connects modern RJ45 ports to legacy DB9 peripherals
$15.56 $14.99 Save $0.57The item has been added -
Datalogic
SKU: 6003-0923
Datalogic 6003-0923 Power Cord 240V UK
Genuine Datalogic 240V UK power cord with overcurrent protection
- 240V AC rated for UK/European Datalogic enterprise hardware
- Overcurrent protection and EMI shielding for safe operation
- Authentic OEM component manufactured to Datalogic specifications
$16.00 $15.99 Save $0.01The item has been added -
Datalogic
SKU: 6003-0924
Datalogic 6003-0924 Power Cord 220V Italy/Chile
220V power cord for Datalogic devices in Italy and Chile
- OEM Datalogic connector with overcurrent protection and EMI shielding
- 220V regulated power delivery meets Italy and Chile regional standards
- Genuine manufacturer component eliminates third-party compatibility risk
$8.00 $7.99 Save $0.01The item has been added -
Datalogic
SKU: 6003-0925
Datalogic 6003-0925 Power Cord 220V Australia
Genuine 220V power cord for Datalogic devices in Australian installations
- 220V rated for Australian power standards with OEM voltage protection
- Genuine Datalogic component ensures compatibility with enterprise hardware
- Integral overcurrent protection and electromagnetic shielding for safe operation
$8.00 $7.99 Save $0.01The item has been added -
Datalogic
SKU: 6003-0926
Datalogic 6003-0926 Power Cord IEC C13 Argentina
Genuine Datalogic OEM power cord with IEC C13 for Argentina
- IEC C13 connector for standard enterprise device connectivity
- Manufactured to Datalogic electrical specs and safety standards
- Designed for Argentina regional power system configuration
$8.00 $7.99 Save $0.01The item has been added -
Datalogic
SKU: 6003-0927
Datalogic 6003-0927 Power Cord 100V Japan
Genuine OEM power cord 100V for Datalogic enterprise hardware in Japan
- 100V rated connector meets Japan standard specifications for regional deployments
- Overcurrent protection and EMI shielding for stable operation in multi-device environments
- Authentic Datalogic component ensures full compatibility with supported enterprise devices
$8.00 $7.99 Save $0.01The item has been added -
Datalogic
SKU: 6003-0935
Datalogic 6003-0935 IEC C13 Power Cord RoHS
Genuine OEM IEC C13 power cord for Datalogic enterprise scanners
- IEC C13 connector fits standard enterprise imaging and scanning devices
- RoHS compliant genuine Datalogic original manufacturer part
- Built for warehouse, logistics, retail, and manufacturing operations
$8.00 $7.99 Save $0.01The item has been added -
Add to Cart The item has been addedDatalogic
SKU: 6003-0940
Datalogic 6003-0940 Power Cord AC IEC/EU
Genuine OEM AC power cord with IEC/EU connector for Datalogic devices
- IEC/EU connector standard for international enterprise deployments
- Integrated overcurrent protection with EMI shielding for stable operation
- Genuine Datalogic component ensures full compatibility with supported systems
$8.00 $7.99 Save $0.01The item has been added -
Add to Cart The item has been addedDatalogic
SKU: 6003-0941
Datalogic 6003-0941 Power Cord 110V US 3-Prong
Genuine OEM power cord for Datalogic devices, 110V US 3-prong
- 110V AC with US standard 3-prong connector for direct compatibility
- Manufactured to original Datalogic equipment specifications and standards
- Compact 8.6-inch cord minimizes cable clutter in production environments
$14.00 $13.99 Save $0.01The item has been added -
Datalogic
SKU: 6003-0942
Datalogic 6003-0942 Power Cord IEC C13 Brazil
IEC C13 power cord for Datalogic scanners, Brazil-certified
- OEM connector rated for Datalogic enterprise scanners and mobile terminals
- Overcurrent protection and EMI shielding for industrial environments
- Brazil regional certification meets local electrical standards
$8.00 $7.99 Save $0.01The item has been added
Connectivity & Media
Connectivity and media components support reliable communication between cameras, access control devices, intercom systems, and network infrastructure. Proper cabling and connection hardware ensure stable performance, reduced signal loss, and long-term system reliability.
Plan Your Deployment
- Cable type selection (Ethernet, fiber, coaxial as applicable)
- Distance requirements and signal integrity planning
- Environmental considerations (indoor, plenum, outdoor-rated)
- Connector compatibility and termination standards
- Future expansion and structured cabling design
Connectivity & Media — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 2 working models of connectivity & media sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Type | Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.