Axis TQ3901 M20 Gasket Cable Entry - 02277-001

Axis 02277-001 TQ3901 M20 Gasket Cable Entry

Overview

The Axis 02277-001 is an M20 gasket cable entry designed to seal cable penetrations on outdoor Axis surveillance equipment. It creates a weatherproof barrier around incoming cables, preventing moisture, dust, and debris from entering the camera housing—a critical detail when your cameras sit exposed to rain, humidity, and temperature cycling. The gasket maintains the IP rating of your camera by closing the gap where network and power cables pass through the housing. Install one on any outdoor Axis camera that uses an M20 threaded cable entry port.

Compatibility

The 02277-001 fits Axis network cameras and housings with M20 cable entry threads. This includes outdoor dome models such as the Axis P3267-LV and other Axis cameras in the P32-series and comparable outdoor surveillance lines that feature M20 threaded ports. Verify your specific camera model supports M20 cable entries before ordering; consult the camera's installation guide or datasheet for exact port specifications.

Installation Notes

Thread the gasket into the M20 port on your camera housing until hand-tight, then snug with an appropriately sized wrench—do not overtighten, which can crack the housing threads. Route cables through the gasket opening before final installation. The gasket is rated for the same environmental conditions as the camera body; if your camera is IP66-rated for outdoor spray and dust exposure, the sealed gasket maintains that protection. No additional sealing compound is required; the gasket's internal profile creates the weatherproof seal mechanically.

What's in the Box

• 1x Axis TQ3901 M20 Gasket Cable Entry